aboutsummaryrefslogtreecommitdiffstats
path: root/vim-mode
diff options
context:
space:
mode:
Diffstat (limited to 'vim-mode')
-rw-r--r--vim-mode/README.md284
1 files changed, 284 insertions, 0 deletions
diff --git a/vim-mode/README.md b/vim-mode/README.md
new file mode 100644
index 0000000..a59691a
--- /dev/null
+++ b/vim-mode/README.md
@@ -0,0 +1,284 @@
+# NAME
+
+vim_mode.pl
+
+# DESCRIPTION
+
+An Irssi script to emulate some of the vi(m) features for the Irssi inputline.
+
+# INSTALLATION
+
+Copy into your `~/.irssi/scripts/` directory and load with
+`/SCRIPT LOAD vim_mode.pl`. You may wish to have it autoload in one of the
+[usual ways](https://github.com/shabble/irssi-docs/wiki/Guide#Autorunning_Scripts).
+
+## DEPENDENCIES
+
+For proper :ex mode support, vim-mode requires the installation of `uberprompt.pl`
+Uberprompt can be downloaded from:
+
+[https://github.com/shabble/irssi-scripts/raw/master/prompt_info/uberprompt.pl](https://github.com/shabble/irssi-scripts/raw/master/prompt_info/uberprompt.pl)
+
+and follow the instructions at the top of that file for installation.
+
+If you don't need Ex-mode, you can run vim_mode.pl without the
+uberprompt.pl script, but it is recommended.
+
+### Irssi requirements
+
+0.8.12 and above should work fine. However the following features are
+disabled in irssi < 0.8.13:
+
+- `j` `k` (only with count, they work fine without count in older versions)
+- `gg`, `G`
+
+It is intended to work with at Irssi 0.8.12 and later versions. However some
+features are disabled in older versions (see below for details).
+
+Perl >= 5.8.1 is recommended for UTF-8 support (which can be disabled if
+necessary). Please report bugs in older versions as well, we'll try to fix
+them. Later versions of Perl are also faster, which is probably beneficial
+to a script of this size and complexity.
+
+## SETUP
+
+Use the following command to get a statusbar item that shows which mode
+you're in.
+
+`/statusbar window add vim_mode`
+
+And the following to let `:b _name_` display a list of matching channels
+
+`/statusbar window add vim_windows`
+
+__Note:__ Remember to `/save` after adding these statusbar items to make them
+permanent.
+
+
+
+### FILE-BASED CONFIGURATION
+
+Additionally to the irssi settings described in [SETTINGS](#pod_SETTINGS), vim_mode
+can be configured through an external configuration file named "vim_moderc"
+located in `~/.irssi/vim_moderc`. If available it's loaded on startup and every
+supported ex-command is run. Its syntax is similar to "vimrc". To (re)load it
+while vim_mode is running use `:so[urce]`.
+
+Currently Supported ex-commands:
+
+- `:map`
+
+# USAGE
+
+## COMMAND MODE
+
+It supports most commonly used command mode features:
+
+ - Insert/Command mode. Escape and Ctrl-C enter command mode.
+ /set vim_mode_cmd_seq j allows to use jj as Escape (any other character
+ can be used as well).
+ - Cursor motion: h l 0 ^ $ <Space> <BS> f t F T
+ - History motion: j k gg G
+ gg moves to the oldest (first) history line.
+ G without a count moves to the current input line, with a count it goes to
+ the count-th history line (1 is the oldest).
+ - Cursor word motion: `w b ge e W gE B E`
+ - Word objects (only the following work yet): `aw aW`
+ - Yank and paste: `y p P`
+ - Change and delete: `c d`
+ - Delete at cursor: `x X`
+ - Replace at cursor: `r`
+ - Insert mode: `i a I A`
+ - Switch case: `~`
+ - Repeat change: `.`
+ - Repeat `ftFT: ; ,`
+ - Registers: `"a-"z "" "0 "* "+ "_` (black hole)
+ - Appending to register with `"A-"Z`
+ - `""` is the default yank/delete register.
+ - `"0` contains the last yank (if no register was specified).
+ - The special registers `"* "+` both contain irssi's internal cut-buffer.
+
+- Line-wise shortcuts: `dd cc yy`
+- Shortcuts: `s S C D`
+- Scroll the scrollback buffer: `Ctrl-E Ctrl-D Ctrl-Y Ctrl-U Ctrl-F Ctrl-B`
+- Switch to last active window: `Ctrl-6/Ctrl-^`
+- Switch split windows: <Ctrl-W j Ctrl-W k>
+- Undo/Redo: `u Ctrl-R`
+
+Counts and combinations work as well, e.g. `d5fx` or `3iabc<esc>`.
+Counts also work with mapped ex-commands (see below), e.g. if you map `gb` to do
+`:bn`, then `2gb` will switch to the second next buffer. Repeat also supports
+counts.
+
+## INSERT MODE
+
+The following insert mode mappings are supported:
+
+- Insert register content: Ctrl-R x (where x is the register to insert)
+
+## EX-MODE
+
+Ex-mode (activated by `:` in command mode) supports the following commands:
+
+ - Command History: `<uparrow>`, `<<downarrow>`
+ `:eh` - show ex history
+ - Switching buffers: `:[N]b [N]` - switch to channel number
+ `:b#` - switch to last channel
+ `:b` <partial-channel-name>
+ `:b` <partial-server>/<partial-channel>
+ `:buffer {args}` (same as `:b`)
+ `:[N]bn[ext] [N]` - switch to next window
+ `:[N]bp[rev] [N]` - switch to previous window
+ - Close window: `:[N]bd[elete] [N]`
+ - Display windows: `:ls`, `:buffers`
+ - Display registers: `:reg[isters] {args}`, `:di[splay] {args}`
+ - Display undolist: `:undol[ist]` (mostly used for debugging)
+ - Source files `:so[urce]` - only sources vim_moderc at the moment,
+ `{file}` not supported
+ - Mappings: `:map` - display custom mappings
+ - `:map {lhs}` - display mappings starting with {lhs}
+ - `:map {lhs} {rhs}` - add mapping
+ - `:unm[ap] {lhs}` - remove custom mapping
+
+- Save mappings: `:mkv[imrc][!]` - like in Vim, but [file] not supported
+- Substitute: `:s///` - _i_ and _g_ are supported as flags, only /// can
+ be used as separator, uses Perl regex instead of
+ Vim regex
+- Settings: `:se[t]` - display all options
+ `:se[t] {option}` - display all matching options
+ `:se[t] {option} {value}` - change option to value
+
+### MAPPINGS
+
+`{lhs}` is the key combination to be mapped, `{rhs}` the target. The
+`<>`> notation is used
+
+(e.g. `<C-F>` is Ctrl-F), case is ignored. Supported `<>` keys:
+
+- `<C-A>` - `<C-Z>`,
+- `<C-^>`
+- `<C-6>`
+- `<Space>`
+- `&LT;CR&GT;`
+- `&LT;BS&GT;`
+- `<Nop>`
+
+Mapping ex-mode and irssi commands is supported. When mapping ex-mode commands
+the trailing `<Cr>` is not necessary. Only default mappings can be used
+in {rhs}.
+
+Examples:
+
+- `:map w W` - to remap w to work like W
+- `:map gb :bnext` - to map gb to call :bnext
+- `:map gB :bprev`
+- `:map g1 :b 1` - to map g1 to switch to buffer 1
+- `:map gb :b` - to map gb to :b, 1gb switches to buffer 1, 5gb to 5
+- `:map <C-L` /clear> - map Ctrl-L to irssi command /clear
+- `:map <C-G` /window goto 1>
+- `:map <C-E` <Nop>> - disable <C-E>, it does nothing now
+- `:unmap <C-E`> - restore default behavior of <C-E> after disabling it
+
+Note that you must use `/` for irssi commands (like `/clear`), the current value
+of Irssi's cmdchars does __not__ work! This is necessary do differentiate between
+ex-commands and irssi commands.
+
+## SETTINGS
+
+The settings are stored as irssi settings and can be set using `/set` as usual
+(prepend `vim_mode_` to setting name) or using the `:set` ex-command. The
+following settings are available:
+
+- utf8: support UTF-8 characters, boolean, default on
+- debug: enable debug output, boolean, default off
+- cmd_seq: char that when double-pressed simulates <esc>,
+ string, default ''
+=item start_cmd: start every line in command mode, boolean, default off
+- max_undo_lines: size of the undo buffer. Integer, default 50 items.
+- ex_history_size: number of items stored in the ex-mode history.
+ Integer, default 100.
+- prompt_leading_space: determines whether ex mode prepends a space to the
+ displayed input. Boolean, default on
+
+In contrast to irssi's settings, `:set` accepts 0 and 1 as values for boolean
+settings, but only vim_mode's settings can be set/displayed.
+
+Examples:
+
+ :set cmd_seq=j # set cmd_seq to j
+ :set cmd_seq= # disable cmd_seq
+ :set debug=on # enable debug
+ :set debug=off # disable debug
+
+# SUPPORT
+
+Any behavior different from Vim (unless explicitly documented) should be
+considered a bug and reported.
+
+__NOTE:__ This script is still under heavy development, and there may be bugs.
+Please submit reproducible sequences to the bug-tracker at:
+[http://github.com/shabble/irssi-scripts/issues](http://github.com/shabble/irssi-scripts/issues)
+
+or contact rudi_s or shabble on irc.freenode.net (#irssi and #irssi_vim)
+
+# AUTHORS
+
+Copyright &copy; 2010-2011 Tom Feist `<shabble+irssi@metavore.org>` and
+Copyright &copy; 2010-2011 Simon Ruderich `<simon@ruderich.org<gt`>
+
+# THANKS
+
+Particular thanks go to
+
+- estragib: a lot of testing and many bug reports and feature requests
+- iaj: testing
+- tmr: explaining how various bits of vim work
+
+as well as the rest of `#irssi` and `#irssi_vim` on Freenode IRC.
+
+# LICENCE
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+# BUGS
+
+- count before register doesn't work: e.g. 3"ap doesn't work, but "a3p does
+- mapping an incomplete ex-command doesn't open the ex-mode with the partial
+ command (e.g. `:map gb :b` causes an error instead of opening the ex-mode and
+ displaying `:b<cursor>`)
+- undo/redo cursor positions are mostly wrong
+
+# TODO
+
+ - History:
+ - ` * /,?,n,N` to search through history (like rl_history_search.pl)
+
+ - Window switching (`:b`)
+ - Tab completion of window(-item) names
+ - non-sequential matches(?)
+
+See also the TODO file at
+[github](https://github.com/shabble/irssi-scripts/blob/master/vim-mode/TODO) for
+many many more things.
+
+## WONTFIX
+
+Things we're not ever likely to do:
+
+- Macros \ No newline at end of file