# A script to emulate some of the vi(m) features for the Irssi inputline.
#
# Currently supported features:
#
# * Insert/Command mode. Escape enters command mode.
# * cursor motion with: h l 0 ^ $
# * history motion with j k
# * cursor word motion with: w b e W B E
# * change/delete: c d C D
# * delete at cursor: x
# * replace at cursor: r
# * Insert mode at pos: i a
# * Insert mode at start: I
# * insert mode at end: A
# * yank and paste: y p P
# * switch case: ~
# * repeat change: .
# * change/change/yank line: cc dd yy S
# * Combinations like in Vi, e.g. d5fx
# * goto window: 5G
#
# TODO:
# * /,?,n to search through history (like history_search.pl)
# * u = undo (how many levels, branching?!) redo?
# * use irssi settings for some of the features (esp. debug)
# * history movement should keep track of the 'active' input line and restore it

# Known bugs:
# * count with insert mode: 3iabc<esc> doesn't work
# * repeat insert mode: iabc<esc>. only enters insert mode

# Installation:
#
# The usual, stick in scripts dir, /script load vim_mode.pl ...
#
# Use the following command to get a statusbar item that shows which mode you're
# in. Annoying vi bleeping not yet supported :)

# /statusbar window add vim_mode to get the status.

# NOTE: This is still under extreme development, and there's a whole bunch of
# debugging output. Edit the DEBUG constant to remove it if it bothers you.

# Have fun!

use strict;
use warnings;

use Irssi;
use Irssi::TextUI;              # for sbar_items_redraw


use vars qw($VERSION %IRSSI);
$VERSION = "1.0.1";
%IRSSI =
  (
   authors         => "Tom Feist (shabble), Simon Ruderich (rudi_s)",
   contact         => 'shabble+irssi@metavore.org, '
                    . 'shabble@#irssi/Freenode, simon@ruderich.org'
                    . 'rudi_s@#irssi/Freenode',
   name            => "vim_mode",
   description     => "Give Irssi Vim-like commands for editing the inputline",
   license         => "Public Domain",
   changed         => "20/9/2010"
  );


# CONSTANTS

sub DEBUG () { 1 }
#sub DEBUG () { 0 }

sub M_CMD() { 1 } # command mode
sub M_INS() { 0 } # insert mode
sub M_EX () { 2 } # extended mode (after a :?)

# word and non-word regex
my $word     = '[a-zA-Z0-9_]';
my $non_word = '[^a-zA-Z0-9_\s]';


# GLOBAL VARIABLES

# buffer to keep track of the last N keystrokes following an Esc character.
my @esc_buf;
my $esc_buf_timer;
my $esc_buf_enabled = 0;

# flag to allow us to emulate keystrokes without re-intercepting them
my $should_ignore = 0;

# ex mode buffer
my @ex_buf;

# for commands like 10x
my $numeric_prefix = undef;
# vi operators like d, c, ..
my $operator = undef;
# vi movements, only used when a movement needs more than one key (like f t).
my $movement = undef;
# last vi command, used by .
my $last
  = {
     'char' => undef,
     'numeric_prefix' => undef,
     'operator' => undef,
     'movement' => undef
    };

# what Vi mode we're in. We start in insert mode.
my $mode = M_INS;

# vi registers, at the moment only the default yank register (") is used
my $registers
  = {
     '"' => ''
    };

# index into the history list (for j,k)
my $history_index = undef;
# current line, necessary for j,k or the current input line gets destroyed
my $history_input = undef;
# position in input line
my $history_pos = 0;

# Undo/redo buffer.
my @undo_buffer;
my $undo_index = undef;

sub script_is_loaded {
    my $name = shift;
    print "Checking if $name is loaded" if DEBUG;
    no strict 'refs';
    my $retval = defined %{ "Irssi::Script::${name}::" };
    use strict 'refs';

    return $retval;
}

unless (script_is_loaded('prompt_info')) {
    die "This script requires 'prompt_info' in order to work. "
      . "Please load it and try again";
} else {
    vim_mode_init();
}


# vi-operators like d, c; they don't move the cursor
my $operators
  = {
     'c' => { func => \&cmd_operator_c },
     'd' => { func => \&cmd_operator_d },
     'y' => { func => \&cmd_operator_y },
    };

# vi-moves like w,b; they move the cursor and may get combined with an
# operator; also things like i/I are listed here, not entirely correct but
# they work in a similar way
my $movements
  = {
     # arrow like movement
     'h' => { func => \&cmd_movement_h },
     'l' => { func => \&cmd_movement_l },
     ' ' => { func => \&cmd_movement_space },
     'j' => { func => \&cmd_movement_j },
     'k' => { func => \&cmd_movement_k },
     # char movement, take an additional parameter and use $movement
     'f' => { func => \&cmd_movement_f },
     't' => { func => \&cmd_movement_t },
     'F' => { func => \&cmd_movement_F },
     'T' => { func => \&cmd_movement_T },
     # word movement
     'w' => { func => \&cmd_movement_w },
     'b' => { func => \&cmd_movement_b },
     'e' => { func => \&cmd_movement_e },
     'W' => { func => \&cmd_movement_W },
     'B' => { func => \&cmd_movement_B },
     'E' => { func => \&cmd_movement_E },
     # line movement
     '0' => { func => \&cmd_movement_0 },
     '^' => { func => \&cmd_movement_caret },
     '$' => { func => \&cmd_movement_dollar },
     # delete chars
     'x' => { func => \&cmd_movement_x },
     # insert mode
     'i' => { func => \&cmd_movement_i },
     'I' => { func => \&cmd_movement_I },
     'a' => { func => \&cmd_movement_a },
     'A' => { func => \&cmd_movement_A },
     # replace mode
     'r' => { func => \&cmd_movement_r },
     # paste
     'p' => { func => \&cmd_movement_p },
     'P' => { func => \&cmd_movement_P },
     # to end of line
     'C' => { func => \&cmd_movement_dollar },
     'D' => { func => \&cmd_movement_dollar },
     # change window
     'G' => { func => \&cmd_movement_G },
     # misc
     '~' => { func => \&cmd_movement_tilde },
     '.' => {},
     # undo
     'u'    => { func => \&cmd_undo },
     "\x12" => { func => \&cmd_redo },

    };

# special movements which take an additional key
my $movements_multiple =
    {
     'f' => undef,
     't' => undef,
     'F' => undef,
     'T' => undef,
     'r' => undef,
    };


sub cmd_undo {
    print "Undo!" if DEBUG;
}

sub cmd_redo {
    print "Redo!" if DEBUG;
}

sub cmd_operator_c {
    my ($old_pos, $new_pos, $move) = @_;

    cmd_operator_d($old_pos, $new_pos, $move);
    _update_mode(M_INS);
}
sub cmd_operator_d {
    my ($old_pos, $new_pos, $move) = @_;

    my ($pos, $length) = _get_pos_and_length($old_pos, $new_pos, $move);

    # Remove the selected string from the input.
    my $input = _input();
    $registers->{'"'} = substr $input, $pos, $length, '';
    _input($input);
    print "Deleted: " . $registers->{'"'} if DEBUG;

    # Move the cursor at the right position.
    _input_pos($pos);
}
sub cmd_operator_y {
    my ($old_pos, $new_pos, $move) = @_;

    my ($pos, $length) = _get_pos_and_length($old_pos, $new_pos, $move);

    # Extract the selected string and put it in the " register.
    my $input = _input();
    $registers->{'"'} = substr $input, $pos, $length;
    print "Yanked: " . $registers->{'"'} if DEBUG;

    _input_pos($old_pos);
}
sub _get_pos_and_length {
    my ($old_pos, $new_pos, $move) = @_;

    my $length = $new_pos - $old_pos;
    # We need a positive length and $old_pos must be smaller.
    if ($length < 0) {
        $old_pos = $new_pos;
        $length *= -1;
    }

    # w, x, h, l are the only movements which move one character after the
    # deletion area (which is what we need), all other commands need one
    # character more for correct deletion.
    if ($move ne 'w' and $move ne 'x' and $move ne 'h' and $move ne 'l') {
        $length += 1;
    }

    return ($old_pos, $length);
}


sub cmd_movement_h {
    my ($count, $pos) = @_;

    $pos -= $count;
    $pos = 0 if $pos < 0;
    _input_pos($pos);
}
sub cmd_movement_l {
    my ($count, $pos) = @_;

    my $length = _input_len();
    $pos += $count;
    $pos = $length if $pos > $length;
    _input_pos($pos);
}
sub cmd_movement_space {
    my ($count, $pos) = @_;
    cmd_movement_l($count, $pos);
}

# later history (down)
sub cmd_movement_j {
    my ($count, $pos) = @_;

    if (Irssi::version < 20090117) {
        # simulate a down-arrow
        _emulate_keystrokes(0x1b, 0x5b, 0x42);
        return;
    }

    my @history = Irssi::active_win->get_history_lines();

    if (defined $history_index) {
        $history_index += $count;
        print "History Index: $history_index" if DEBUG;
    } else {
        $history_index = $#history;
    }

    if ($history_index > $#history) {
        # Restore the input line.
        _input($history_input);
        _input_pos($history_pos);
        $history_index = $#history + 1;
    } elsif ($history_index >= 0) {
        _input($history[$history_index]);
        _input_pos(0);
    }
}
# earlier history (up)
sub cmd_movement_k {
    my ($count, $pos) = @_;

    if (Irssi::version < 20090117) {
        # simulate an up-arrow
        _emulate_keystrokes(0x1b, 0x5b, 0x41);
        return;
    }

    my @history = Irssi::active_win->get_history_lines();

    if (defined $history_index) {
        $history_index -= $count;
        $history_index = 0 if $history_index < 0;
    } else {
        $history_index = $#history;
        $history_input = _input();
        $history_pos = _input_pos();
    }
    print "History Index: $history_index" if DEBUG;
    if ($history_index >= 0) {
        _input($history[$history_index]);
        _input_pos(0);
    }
}

sub cmd_movement_f {
    my ($count, $pos, $char) = @_;

    $pos = _next_occurrence(_input(), $char, $count, $pos);
    if ($pos != -1) {
        _input_pos($pos);
    }
}
sub cmd_movement_t {
    my ($count, $pos, $char) = @_;

    $pos = _next_occurrence(_input(), $char, $count, $pos);
    if ($pos != -1) {
        _input_pos($pos - 1);
    }
}
sub cmd_movement_F {
    my ($count, $pos, $char) = @_;

    my $input = reverse _input();
    $pos = _next_occurrence($input, $char, $count, length($input) - $pos - 1);
    if ($pos != -1) {
        _input_pos(length($input) - $pos - 1);
    }
}
sub cmd_movement_T {
    my ($count, $pos, $char) = @_;

    my $input = reverse _input();
    $pos = _next_occurrence($input, $char, $count, length($input) - $pos - 1);
    if ($pos != -1) {
        _input_pos(length($input) - $pos - 1 + 1);
    }
}
# Find $count-th next occurrence of $char.
sub _next_occurrence {
    my ($input, $char, $count, $pos) = @_;

    while ($count-- > 0) {
        $pos = index $input, $char, $pos + 1;
        if ($pos == -1) {
            return -1;
        }
    }
    return $pos;
}

sub cmd_movement_w {
    my ($count, $pos) = @_;

    my $input = _input();
    while ($count-- > 0) {
        # Go to end of next word/non-word.
        if (substr($input, $pos) =~ /^$word+/ or
            substr($input, $pos) =~ /^$non_word+/) {
            $pos += $+[0];
        }
        # And skip over any whitespace if necessary. This also happens when
        # we're inside whitespace.
        if (substr($input, $pos) =~ /^\s+/) {
            $pos += $+[0];
        }
    }

    _input_pos($pos);
}
sub cmd_movement_b {
    my ($count, $pos) = @_;

    my $input = reverse _input();
    $pos = length($input) - $pos - 1;
    $pos = 0 if ($pos < 0);

    $pos = _end_of_word($input, $count, $pos);
    _input_pos(length($input) - $pos - 1);
}
sub cmd_movement_e {
    my ($count, $pos) = @_;

    $pos = _end_of_word(_input(), $count, $pos);
    _input_pos($pos);
}
# Go to the end of $count-th word, like vi's e.
sub _end_of_word {
    my ($input, $count, $pos) = @_;

    while ($count-- > 0) {
        my $skipped = 0;
        # Skip over whitespace if in the middle of it or directly after the
        # current word/non-word.
        if (substr($input, $pos + 1) =~ /^\s+/) {
            $pos += $+[0] + 1;
            $skipped = 1;
        }
        # We are inside a word/non-word, skip to the end of it.
        if (substr($input, $pos) =~ /^$word{2,}/ or
            substr($input, $pos) =~ /^$non_word{2,}/) {
            $pos += $+[0] - 1;
        # We are the border of word/non-word. Skip to the end of the next one.
        # But not if we've already jumped over whitespace because there could
        # be only one word/non-word char after the whitespace.
        } elsif (!$skipped and (substr($input, $pos) =~ /^$word($non_word+)/ or
                                substr($input, $pos) =~ /^$non_word($word+)/)) {
            $pos += $+[0] - 1;
        }
    }

    return $pos;
}
sub cmd_movement_W {
    my ($count, $pos) = @_;

    my $input = _input();
    while ($count-- > 0 and length($input) > $pos) {
        if (substr($input, $pos + 1) !~ /\s+/) {
            return cmd_movement_dollar();
        }
        $pos += $+[0] + 1;
    }
    _input_pos($pos);
}
sub cmd_movement_B {
    my ($count, $pos) = @_;

    my $input = reverse _input();
    $pos = _end_of_WORD($input, $count, length($input) - $pos - 1);
    if ($pos == -1) {
        cmd_movement_0();
    } else {
        _input_pos(length($input) - $pos - 1);
    }
}
sub cmd_movement_E {
    my ($count, $pos) = @_;

    $pos = _end_of_WORD(_input(), $count, $pos);
    if ($pos == -1) {
        cmd_movement_dollar();
    } else {
        _input_pos($pos);
    }
}
# Go to the end of $count-th WORD, like vi's e.
sub _end_of_WORD {
    my ($input, $count, $pos) = @_;

    return $pos if $pos >= length($input);

    # We are inside a WORD, skip to the end of it.
    if (substr($input, $pos + 1) =~ /^\S+(\s)/) {
        $pos += $-[1];
        $count--;
    }

    while ($count-- > 0) {
        if (substr($input, $pos) !~ /\s+\S+(\s+)/) {
            return -1;
        }
        $pos += $-[1] - 1;
    }
    return $pos;
}

sub cmd_movement_0 {
    _input_pos(0);
}
sub cmd_movement_caret {
    my $input = _input();
    my $pos;
    # No whitespace at all.
    if ($input !~ m/^\s/) {
        $pos = 0;
    # Some non-whitesapece, go to first one.
    } elsif ($input =~ m/[^\s]/) {
        $pos = $-[0];
    # Only whitespace, go to the end.
    } else {
        $pos = _input_len();
    }
    _input_pos($pos);
}
sub cmd_movement_dollar {
    _input_pos(_input_len());
}

sub cmd_movement_x {
    my ($count, $pos) = @_;

    cmd_operator_d($pos, $pos + $count, 'x');
}

sub cmd_movement_i {
    _update_mode(M_INS);
}
sub cmd_movement_I {
    cmd_movement_caret();
    _update_mode(M_INS);
}
sub cmd_movement_a {
    cmd_movement_l(1, _input_pos());
    _update_mode(M_INS);
}
sub cmd_movement_A {
    cmd_movement_dollar();
    _update_mode(M_INS);
}

sub cmd_movement_r {
    my ($count, $pos, $char) = @_;

    my $input = _input();
    substr $input, $pos, 1, $char;
    _input($input);
    _input_pos($pos);
}

sub cmd_movement_p {
    my ($count, $pos) = @_;
    _paste_at_position($count, $pos + 1);
}
sub cmd_movement_P {
    my ($count, $pos) = @_;
    _paste_at_position($count, $pos);
}
sub _paste_at_position {
    my ($count, $pos) = @_;

    return if not $registers->{'"'};

    my $string = $registers->{'"'} x $count;

    my $input = _input();
    # Check if we are not at the end of the line to prevent substr outside of
    # string error.
    if (length $input > $pos) {
        substr($input, $pos, 0) = $string;
    } else {
        $input .= $string;
    }
    _input($input);

    _input_pos($pos - 1 + length $string);
}

sub cmd_movement_G {
    my ($count, $pos) = @_;

    my $window = Irssi::window_find_refnum($count);
    if ($window) {
        $window->set_active();
    }
}

sub cmd_movement_tilde {
    my ($count, $pos) = @_;

    my $input = _input();
    my $string = substr $input, $pos, $count;
    $string =~ tr/a-zA-Z/A-Za-z/;
    substr $input, $pos, $count, $string;

    _input($input);
    _input_pos($pos + $count);
}

sub cmd_ex_command {
    my $arg_str = join '', @ex_buf;
    if ($arg_str =~ m|s/(.+)/(.*)/([ig]*)|) {
        my ($search, $replace, $flags) = ($1, $2, $3);
        print "Searching for $search, replace: $replace, flags; $flags"
          if DEBUG;

        my $rep_fun = sub { $replace };

        my $line = _input();
        my @re_flags = split '', $flags // '';

        if (scalar grep { $_ eq 'i' } @re_flags) {
            $search = '(?i)' . $search;
        }

        print "Search is $search" if DEBUG;

        my $re_pattern = qr/$search/;

        if (scalar grep { $_ eq 'g' } @re_flags) {
            $line =~ s/$re_pattern/$rep_fun->()/eg;
        } else {
            print "Single replace: $replace" if DEBUG;
            $line =~ s/$re_pattern/$rep_fun->()/e;
        }

        print "New line is: $line" if DEBUG;
        _input($line);
    }
}


# vi mode status item.
sub vim_mode_cb {
    my ($sb_item, $get_size_only) = @_;
    my $mode_str = '';
    if ($mode == M_INS) {
        $mode_str = 'Insert';
    } elsif ($mode == M_EX) {
        $mode_str = '%_Ex%_';
    } else {
        $mode_str = '%_Command%_';
    }
    $sb_item->default_handler($get_size_only, "{sb $mode_str}", '', 0);
}


sub got_key {
    my ($key) = @_;

    return if ($should_ignore);

    # Esc key
    if ($key == 27) {
        print "Esc seen, starting buffer" if DEBUG;
        $esc_buf_enabled = 1;

        # NOTE: this timeout might be too low on laggy systems, but
        # it comes at the cost of keystroke latency for things that
        # contain escape sequences (arrow keys, etc)
        $esc_buf_timer
          = Irssi::timeout_add_once(10, \&handle_esc_buffer, undef);

    } elsif ($mode == M_INS) {
        if ($key == 3) { # Ctrl-C enter command mode
            _update_mode(M_CMD);
            _stop();
            return;
        } elsif ($key == 10) { # enter.
            _commit_line(_input());
            @undo_buffer = ();
            $undo_index = undef;
            _stop();
        }
    }

    if ($esc_buf_enabled) {
        push @esc_buf, $key;
        _stop();
        return;
    }

    if ($mode == M_CMD || $mode == M_EX) {
        handle_command($key);
    }
}

sub handle_esc_buffer {

    Irssi::timeout_remove($esc_buf_timer);
    $esc_buf_timer = undef;
    # see what we've collected.
    print "Esc buffer contains: ", join(", ", @esc_buf) if DEBUG;

    if (@esc_buf == 1 && $esc_buf[0] == 27) {

        print "Enter Command Mode" if DEBUG;
        _update_mode(M_CMD);

    } else {
        # we need to identify what we got, and either replay it
        # or pass it off to the command handler.
        if ($mode == M_CMD) {
            # command
            my $key_str = join '', map { chr } @esc_buf;
            if ($key_str =~ m/^\e\[([ABCD])/) {
                print "Arrow key: $1" if DEBUG;
            } else {
                print "Dunno what that is." if DEBUG;
            }
        } else {
            _emulate_keystrokes(@esc_buf);
        }
    }

    @esc_buf = ();
    $esc_buf_enabled = 0;
}

sub handle_numeric_prefix {
    my ($char) = @_;
    my $num = 0+$char;

    if (defined $numeric_prefix) {
        $numeric_prefix *= 10;
        $numeric_prefix += $num;
    } else {
        $numeric_prefix = $num;
    }
}

sub handle_command {
    my ($key) = @_;

    if ($mode == M_EX) {
        # DEL key - remove last character
        if ($key == 127) {
            print "Delete" if DEBUG;
            pop @ex_buf;
            _set_prompt(':' . join '', @ex_buf);

        # Return key - execute command
        } elsif ($key == 10) {
            print "Run ex-mode command" if DEBUG;
            cmd_ex_command();
            _set_prompt('');
            @ex_buf = ();
            _update_mode(M_CMD);

        # Append entered key
        } else {
            push @ex_buf, chr $key;
            _set_prompt(':' . join '', @ex_buf);
        }

    } else {
        my $char = chr($key);

        # We need to treat $movements_multiple specially as they need another
        # argument.
        if ($movement) {
            $movement .= $char;
        }

        # S is an alias for cc.
        if (!$movement and !$operator and $char eq 'S') {
            print "Changing S to cc" if DEBUG;
            $char = 'c';
            $operator = 'c';
        }

        if (!$movement && ($char =~ m/[1-9]/ ||
                           ($numeric_prefix && $char =~ m/[0-9]/))) {
            print "Processing numeric prefix: $char" if DEBUG;
            handle_numeric_prefix($char);

        } elsif (!$movement && exists $movements_multiple->{$char}) {
            print "Processing movement: $char" if DEBUG;
            $movement = $char;

        } elsif (!$movement && exists $operators->{$char}) {
            print "Processing operator: $char" if DEBUG;

            # Abort operator if we already have one pending.
            if ($operator) {
                # But allow cc/dd/yy.
                if ($operator eq $char) {
                    print "Processing operator: ", $operator, $char if DEBUG;
                    my $pos = _input_pos();
                    $operators->{$operator}->{func}->(0, _input_len(), '');
                    # Restore position for yy.
                    if ($char eq 'y') {
                        _input_pos($pos);
                    }
                }
                $numeric_prefix = undef;
                $operator = undef;
                $movement = undef;
            # Set new operator.
            } else {
                $operator = $char;
            }

        } elsif ($movement || exists $movements->{$char}) {
            print "Processing movement command: $char" if DEBUG;

            my $skip = 0;

            if (!$movement) {
                # . repeats the last command.
                if ($char eq '.' and defined $last->{char}) {
                    $char = $last->{char};
                    # If . is given a count then it replaces original count.
                    if (not defined $numeric_prefix) {
                        $numeric_prefix = $last->{numeric_prefix};
                    }
                    $operator = $last->{operator};
                    $movement = $last->{movement};
                } elsif ($char eq '.') {
                    $skip = 1;
                }
                # C and D force the matching operator
                if ($char eq 'C') {
                    $operator = 'c';
                } elsif ($char eq 'D') {
                    $operator = 'd';
                }
            }

            if ($skip) {
                print "Skipping movement and operator." if DEBUG;
            } else {
                $numeric_prefix = 1 if not $numeric_prefix;

                # Execute the movement (multiple times).
                my $cur_pos = _input_pos();
                if (not $movement) {
                    $movements->{$char}->{func}->($numeric_prefix, $cur_pos);
                } else {
                    # Use the real movement command (like t or f) for operator
                    # below.
                    $char = substr $movement, 0, 1;
                    $movements->{$char}->{func}
                              ->($numeric_prefix, $cur_pos, substr $movement, 1);
                }
                my $new_pos = _input_pos();

                # If we have an operator pending then run it on the handled
                # text. But only if the movement changed the position (this
                # prevents problems with e.g. f when the search string doesn't
                # exist).
                if ($operator and $cur_pos != $new_pos) {
                    print "Processing operator: ", $operator if DEBUG;
                    $operators->{$operator}->{func}->($cur_pos, $new_pos, $char);
                }

                # Store command, necessary for . But ignore movements only.
                if ($operator) {
                    $last->{char} = $char;
                    $last->{numeric_prefix} = $numeric_prefix;
                    $last->{operator} = $operator;
                    $last->{movement} = $movement;
                }
            }

            $numeric_prefix = undef;
            $operator = undef;
            $movement = undef;

        # Start Ex mode.
        } elsif ($char eq ':') {
            _update_mode(M_EX);
            _set_prompt(':');

        # Enter key sends the current input line in command mode as well.
        } elsif ($key == 10) {
            _commit_line(_input());
        }
    }

    _stop();
}

sub vim_mode_init {
    Irssi::signal_add_first 'gui key pressed' => \&got_key;
    Irssi::statusbar_item_register ('vim_mode', 0, 'vim_mode_cb');
}

sub _commit_line {
    my ($line) = @_;

    my $cmdchars = Irssi::settings_get_str('cmdchars');

    my $signal;
    if ($line =~ /^[\Q$cmdchars\E]/) {
        $signal = 'send command';
    } else {
        $signal = 'send text';
    }

    print "Committing line as $signal" if DEBUG;

    # TODO: don't try to send this signal unless server and win are
    # defined (At least for 'send text' signals. There's no reason
    # to send text to an empty window anyway(?)
    Irssi::signal_emit $signal, $line, Irssi::active_server(),
        Irssi::active_win()->{active};
    _input('');
    _update_mode(M_INS);
}

sub _input {
    my ($data) = @_;
    if (defined $data) {
        Irssi::gui_input_set($data);
    } else {
        $data = Irssi::parse_special('$L', 0, 0)
    }
    return $data;
}

sub _input_len {
    return length _input();
}

sub _input_pos {
    my ($pos) = @_;
    my $cur_pos = Irssi::gui_input_get_pos();

    if (defined $pos) {
        Irssi::gui_input_set_pos($pos) if $pos != $cur_pos;
    } else {
        $pos = $cur_pos;
    }

    return $pos;
}

sub _emulate_keystrokes {
    my @keys = @_;
    $should_ignore = 1;
    for my $key (@keys) {
        Irssi::signal_emit('gui key pressed', $key);
    }
    $should_ignore = 0;
}

sub _stop() {
    Irssi::signal_stop();
}

sub _update_mode {
    my ($new_mode) = @_;
    $mode = $new_mode;
    if ($mode == M_INS) {
        $history_index = undef;
    }
    Irssi::statusbar_items_redraw("vim_mode");
}

sub _set_prompt {
    my $msg = shift;
    # add a leading space unless we're trying to clear it entirely.
    $msg = ' ' . $msg if length $msg;
    Irssi::signal_emit('change prompt', $msg);
}

# TODO:
# 10gg -> go to window 10 (prefix.gg -> win <prefix>)