updateHEADmain

2 files changed, 1754 insertions, 0 deletions

diff --git a/terminaldweller.com/eggdrop/docker-compose.yaml b/terminaldweller.com/eggdrop/docker-compose.yaml
new file mode 100644
index 0000000..8b00574
--- /dev/null
+++ b/terminaldweller.com/eggdrop/docker-compose.yaml
@@ -0,0 +1,30 @@
+version: '3.1'
+
+services:
+  eggdrop:
+    image: eggdrop:1.9
+### If running for the first time without providing your own config, you
+### probably want to set these variables
+   # environment:
+   #  - SERVER="irc.terminaldweller.com +6697"
+   #  - NICK=eggdrop
+### Make this match your listen setting in the config
+    ports:
+      - "127.0.0.1:3335:3333"
+### Change this to the path with your config and user/channel files
+    networks:
+      - eggnet
+    volumes:
+      - ./data/:/home/eggdrop/eggdrop/data/
+        #command: ["-c", "/home/eggdrop/eggdrop/data/eggdrop.conf"]
+### If you want to add scripts, put them here. Don't mount to /scripts because
+### it will overwrite the ones that are already used. Make sure you use
+### 'source scripts2/foo.tcl' as the path in the config.
+#     -/changethispart/scripts:/home/eggdrop/eggdrop/scripts2
+### Enter config name, if not eggdrop.conf
+#    command: LeafBlower.conf
+    stdin_open: true
+    tty: true
+    restart: unless-stopped
+networks:
+  eggnet:
diff --git a/terminaldweller.com/eggdrop/eggdrop.conf b/terminaldweller.com/eggdrop/eggdrop.conf
new file mode 100644
index 0000000..1afe4f7
--- /dev/null
+++ b/terminaldweller.com/eggdrop/eggdrop.conf
@@ -0,0 +1,1724 @@
+#! /path/to/executable/eggdrop
+# ^- This should contain a fully qualified path to your Eggdrop executable.
+#
+# This is a sample Eggdrop configuration file which includes all possible
+# settings that can be used to configure your bot.
+#
+# The pound signs (#) that you see at the beginning of some lines mean that
+# the remainder of that line is a comment, or just for your information. By
+# adding or deleting pound signs, you can comment or uncomment a setting,
+# respectively.
+#
+# Arguments for a command or setting may be inclosed in <>'s or []'s in the
+# example/description. Arguments in <>'s are required, while [] means optional.
+#
+# More detailed descriptions of all these settings can be found in
+# doc/settings/.
+
+
+
+##### BASIC SETTINGS #####
+
+# This setting defines the username the bot uses on IRC. This setting has no
+# effect if an ident daemon is running on your bot's machine. See also ident
+# module.
+set username "eggdrop"
+
+# This setting defines which contact person should be shown in .status,
+# /msg help, and other places. You really should include this information.
+set admin "devi <email: devi@terminaldweller.com>"
+
+# This setting is used only for info to share with others on your botnet.
+# Set this to the IRC network your bot is connected to.
+set network "irc.terminaldweller.com"
+
+# This setting defines which timezone is your bot in. It's used for internal
+# routines as well as for logfile timestamping and scripting purposes.
+# The timezone string specifies the name of the timezone and must be three
+# or more alphabetic characters. For example, Central European Time(UTC+1)
+# should be "CET".
+set timezone "EST"
+
+# The offset setting specifies the time value to be added to the local
+# time to get Coordinated Universal Time (UTC aka GMT). The offset is
+# positive if the local timezone is west of the Prime Meridian and
+# negative if it is east. The value (in hours) must be between -23 and
+# 23. For example, if the timezone is UTC+1, the offset is -1.
+set offset "3:30"
+
+# If you don't want to use the timezone setting for scripting purposes only,
+# but instead everywhere possible, un-comment the following line.
+#set env(TZ) "$timezone$offset"
+
+############################################################################
+## Network settings overview
+## With the addition of IPv6 and the associated config changes, here are some
+## BASIC common networking scenarios, along with the appropriate settings
+## needed:
+##
+## SHELL PROVIDER (MULTIPLE IPs/VHOSTS)
+## * set vhost4 or vhost6 to the IP/vhost you want to use
+## * do not set nat-ip
+## 
+## HOME COMPUTER/VPS, DIRECT INTERNET CONNECTION (SINGLE IP, NO NAT)
+## * do not set vhost4/vhost6
+## * do not set nat-ip
+##
+## HOME COMPUTER, BEHIND A NAT
+## * do not set vhost4/vhost6
+## * set nat-ip to your external IP
+##
+## And as a general rule, if you're having issues with Eggdrop responding to
+## a CTCP chat request, try setting vhost4/6 to your external IP.
+##
+## Below is a detailed description of each setting, please read them to
+## learn more about their function.
+############################################################################
+
+# If you're using virtual hosting (your machine has more than 1 IP), you
+# may want to specify the particular IP to bind to. You can specify either
+# by hostname or by IP. Note that this is not used for listening. Use the
+# 'listen' command to specify the listening address. If you are behind a
+# NAT, you will likely want to leave this commented out as Eggdrop should
+# determine the correct IP on its own.
+#set vhost4 "virtual.host.com"
+#set vhost4 "99.99.0.0"
+
+# IPv6 vhost to bind to for outgoing IPv6 connections. You can set it
+# to any valid IPv6 address or hostname, resolving to an IPv6 address.
+# Note that this is not used for listening. Use the 'listen' command
+# to specify the listening address.
+#set vhost6 "my.ipv6.host.com"
+#set vhost6 "2001:db8::c001:b07"
+
+# Prefer IPv6 over IPv4 for connections and dns resolution? Set to 1 to try 
+# IPv6 first, otherwise set to 0 for IPv4. If the preferred protocol family
+# is not supported, the other one will be tried.
+set prefer-ipv6 0
+
+# If you want to have your Eggdrop messages displayed in a language other
+# than English, change this setting to match your preference. An alternative
+# would be to set the environment variable EGG_LANG to that value.
+#
+# Languages included with Eggdrop: Danish, English, French, Finnish, German,
+# Italian, Portuguese.
+#addlang "english"
+
+
+##### LOG FILES #####
+
+# Eggdrop is capable of logging various things, from channel chatter to
+# commands people use on the bot and file transfers. Logfiles are normally
+# kept for 24 hours. Afterwards, they will be renamed to "(logfile).yesterday".
+# After 48 hours, they will be overwritten by the logfile of the next day.
+#
+# Events are logged by certain categories. This way, you can specify
+# exactly what kind of events you want sent to various logfiles.
+#
+# Logfile flags:
+#   b - information about bot linking and userfile sharing
+#   c - commands
+#   d - misc debug information
+#   g - raw outgoing share traffic
+#   h - raw incoming share traffic
+#   j - joins, parts, quits, topic changes, and netsplits on the channel
+#   k - kicks, bans, and mode changes on the channel
+#   l - linked bot messages
+#   m - private msgs, notices and ctcps to the bot
+#   o - misc info, errors, etc (IMPORTANT STUFF)
+#   p - public text on the channel
+#   r - raw incoming server traffic
+#   s - server connects, disconnects, and notices
+#   t - raw incoming botnet traffic
+#   u - raw outgoing botnet traffic
+#   v - raw outgoing server traffic
+#   w - wallops (make sure the bot sets +w in init-server)
+#   x - file transfers and file-area commands
+#
+# Note that modes d, h, r, t, and v can fill disk quotas quickly. There are
+# also eight user-defined levels (1-8) which can be used by Tcl scripts.
+#
+# Each logfile belongs to a certain channel. Events of type 'k', 'j', and 'p'
+# are logged to whatever channel they happened on. Most other events are
+# currently logged to every channel. You can make a logfile belong to all
+# channels by assigning it to channel "*".
+
+#  This is the maximum number of concurrent logfiles that can be opened
+#  for writing at one time. At most, this value should be the maximum
+#  number of channels you expect to create log files for. There is no
+#  value for 'infinity'; very few cases should ever require more than 20.
+#  A decrease to this value while running will require a restart (not rehash)
+#  of the bot. However, don't decrease it below 5.
+set max-logs 20
+
+# This is the maximum size of your logfiles. Set it to 0 to disable.
+# This value is in kilobytes, so '550' would mean cycle logs when it
+# reaches the size of 550 kilobytes. Note that this only works if you
+# have keep-all-logs 0 (OFF).
+set max-logsize 0
+
+# This could be good if you have had problem with the logfile filling
+# your quota/hard disk or if you log +p and publish it to the web and
+# need more up-to-date info. Note that this setting might increase the
+# CPU usage of your bot (on the other hand it will decrease your mem usage).
+set quick-logs 0
+
+# This setting allows you the logging of raw incoming server traffic via
+# console/log flag 'r', raw outgoing server traffic via console/log mode 'v',
+# raw incoming botnet traffic via console/log mode 't', raw outgoing botnet
+# traffic via console/log mode 'u', raw outgoing share traffic via
+# console/log mode 'g', and raw incoming share traffic via console/log
+# mode 'h'. These flags can create a large security hole, allowing people to
+# see user passwords. This is now restricted to +n users only. Please choose
+# your owners with care.
+set raw-log 0
+
+# This creates a logfile named eggdrop.log that captures items logged at the
+# m, c, and o log levels (private msgs/ctcps, commands/errors, and misc 
+# info) from any channel.
+logfile mco * "logs/eggdrop.log"
+
+# This creates a logfile named lamest.log that captures items logged at the
+# j, p, and k log levels (joins/parts/quits/netsplits, public chat,
+# kicks/bans/mode changes) on the channel #lamest.
+#logfile jpk #lamest "logs/lamest.log"
+
+# Use this feature to timestamp entries in the log file.
+set log-time 1
+
+# Set the following to the timestamp for the logfile entries. Popular times
+# might be "[%H:%M]" (hour, min), or "[%H:%M:%S]" (hour, min, sec).
+# Read `man strftime' for more formatting options. Keep it below 32 chars.
+set timestamp-format {[%H:%M:%S]}
+
+# If you want to keep your logfiles forever, turn this setting on. All
+# logfiles will get suffix ".[day, 2 digits][month, 3 letters][year, 4 digits]".
+# Note that your quota/hard-disk might be filled by this, so check your
+# logfiles often and download them.
+set keep-all-logs 0
+
+# If keep-all-logs is 1, this setting will define the suffix of the logfiles.
+# The default will result in a suffix like "04May2000". "%Y%m%d" will produce
+# the often used yyyymmdd format. Read the strftime manpages for more options.
+set logfile-suffix ".%d%b%Y"
+
+# You can specify when Eggdrop should switch logfiles and start fresh. You
+# must use military time for this setting. 300 is the default, and describes
+# 03:00 (AM).
+set switch-logfiles-at 300
+
+# "Writing user file..." and "Writing channel file..." messages won't be logged
+# anymore if this option is enabled. If you set it to 2, the "Backing up user
+# file..." and "Backing up channel file..." messages will also not be logged.
+# In addition to this, you can disable the "Switching logfiles..." and the new
+# date message at midnight, by setting this to 3.
+set quiet-save 0
+
+
+##### CONSOLE #####
+
+# This is the default console mode. It uses the same event flags as the log
+# files do. The console channel is automatically set to your "primary" channel,
+# which is set in the modules section of the config file. Masters can change
+# their console channel and modes with the '.console' command.
+
+set console "mkcoblxs"
+
+
+##### FILES AND DIRECTORIES #####
+
+# Specify here the filename your userfile should be saved as.
+set userfile "eggdrop.user"
+
+# Specify here the filename Eggdrop will save its pid to. If no pidfile is
+# specified, pid.(botnet-nick) will be used.
+#set pidfile "pid.LamestBot"
+
+# Specify here where Eggdrop should look for help files. Don't modify this
+# setting unless you know what you're doing!
+set help-path "help/"
+
+# Specify here where Eggdrop should look for text files. This is used for
+# certain Tcl and DCC commands.
+set text-path "text/"
+
+# The MOTD (Message Of The day) is displayed when people dcc chat or telnet
+# to the bot. Look at doc/TEXT-SUBSTITUTIONS for options.
+set motd "text/motd"
+
+# This banner will be displayed on telnet connections. Look at
+# doc/TEXT-SUBSTITUTIONS for options.
+set telnet-banner "text/banner"
+
+# This specifies what permissions the user, channel, and notes files should
+# be set to. The octal values are the same as for the chmod system command.
+#
+# To remind you:
+#
+#          u  g  o           u  g  o           u  g  o
+#    0600  rw-------   0400  r--------   0200  -w-------    u - user
+#    0660  rw-rw----   0440  r--r-----   0220  -w--w----    g - group
+#    0666  rw-rw-rw-   0444  r--r--r--   0222  -w--w--w-    o - others
+#
+# Note that the default 0600 is the most secure one and should only be changed
+# if you need your files for shell scripting or other external applications.
+set userfile-perm 0600
+
+
+##### BOTNET/DCC/TELNET #####
+
+# Settings in this section should be unimportant for you until you deal
+# with botnets (multiple Eggdrops connected together to maximize efficiency).
+# You should read doc/BOTNET before modifying these settings.
+
+# If you want to use a different nickname on the botnet than you use on
+# IRC (i.e. if you're on an un-trusted botnet), un-comment the next line
+# and set it to the nick you would like to use.
+#set botnet-nick "LlamaBot"
+
+# This opens a telnet port by which you and other bots can interact with the
+# Eggdrop by telneting in. There are more options for the listen command in
+# doc/tcl-commands.doc. Note that if you are running more than one bot on the
+# same machine, you will want to space the telnet ports at LEAST 5 apart,
+# although 10 is even better.
+#
+# Valid ports are typically anything between 1025 and 65535 assuming the
+# port is not already in use. If you would like the bot to listen for users
+# and bots in separate ports, use the following format:
+#
+#   listen 3333 bots
+#   listen 4444 users
+#
+# If you wish to use only one port, use this format:
+#
+#   listen 3333 all
+#
+# You can setup a SSL port by prepending a plus sign to it:
+#
+#   listen +5555 all
+#
+# To bind the listening port to a specific IP instead of all available, insert
+# a valid IP assigned to the host Eggdrop is running on infront of the port
+# (this replaces the listen-addr setting used prior to Eggdrop v1.9)
+#
+#   listen 1.2.3.4 3333 all
+#
+# You need to un-comment this line and change the port number in order to open
+# the listen port. You should not keep this set to 3333.
+#listen 3333 all
+
+# This setting defines whether or not people can boot users on the Eggdrop
+# from other bots in your botnet.
+# Options are:
+#   0 = allow *no* outside boots
+#   1 = allow boots from sharebots
+#   2 = allow any boots
+set remote-boots 2
+
+# This setting allows remote bots to tell your Eggdrop to unlink from
+# share bots.
+set share-unlinks 1
+
+# This setting will drop telnet connections not matching a known host.
+set protect-telnet 0
+
+# This setting will make the bot ignore DCC chat requests which appear to
+# have bogus information on the grounds that the user may have been trying
+# to make the bot connect to somewhere that will get it into trouble, or
+# that the user has a broken client, in which case the connect wouldn't work
+# anyway.
+set dcc-sanitycheck 0
+
+# This setting defines the time in seconds the bot should wait for ident reply
+# before the lookup fails. The default ident on timeout is 'telnet'. A value of
+# 0 disables the ident lookup entirely.
+set ident-timeout 5
+
+# Define here whether or not a +o user still needs the +p flag to dcc the bot.
+set require-p 1
+
+# If you want people allow to telnet in and type 'NEW' to become a new user,
+# set this to 1. This is similar to the 'hello' msg command. The protect-telnet
+# setting must be set to 0 to use this.
+set open-telnets 0
+
+# If you don't want Eggdrop to identify itself as an eggdrop on a telnet
+# connection, set this setting to 1. Eggdrop will display a logon prompt with
+# only the contents of the stealth-prompt setting.
+set stealth-telnets 0
+
+# If stealth-telnets is 1, the string in this setting will replace the
+# traditional Eggdrop banner. Two common choices are listed. (The \n's are
+# present to maintain backwards compatibility and will be removed in a
+# future release)
+#set stealth-prompt "login: "
+set stealth-prompt "\n\nNickname.\n"
+
+# If you want Eggdrop to display a banner when telneting in, set this setting
+# to 1. The telnet banner is set by 'set telnet-banner'.
+set use-telnet-banner 0
+
+# This setting defines a time in seconds that the bot should wait before
+# a dcc chat, telnet, or relay connection times out.
+set connect-timeout 15
+
+# Specify here the number of lines to accept from a user on the partyline
+# within 1 second before they are considered to be flooding and therefore
+# get booted.
+set dcc-flood-thr 3
+
+# Define here how many telnet connection attempts in how many seconds from
+# the same host constitute a flood. The correct format is Attempts:Seconds.
+set telnet-flood 5:60
+
+# If you want telnet-flood to apply even to +f users, set this setting to 1.
+set paranoid-telnet-flood 1
+
+# Set here the amount of seconds before giving up on hostname/address lookup
+# (you might want to increase this if you are on a slow network). The default is
+# RES_TIMEOUT, which is generally 5, the allowed maximum is RES_MAXRETRANS (see
+# <resolv.h>).
+#set resolve-timeout 5
+
+
+##### SSL SETTINGS #####
+
+# Settings in this section take effect when eggdrop is compiled with TLS
+# support.
+#
+# IMPORTANT: The following two settings MUST be uncommented in order to
+# use SSL functionality!
+
+# File containing your private key, needed for the SSL certificate
+# (see below). You can create one issuing the following command:
+#
+#   openssl genrsa -out eggdrop.key 4096
+#
+# It will create a 4096 bit RSA key, strong enough for eggdrop.
+# For your convenience, you can type 'make sslcert' after 'make install'
+# and you'll get a key and a certificate in your eggdrop directory.
+# If you installed to a non-default location, use 'make sslcert DEST=...'
+#
+# THIS IS REQUIRED if you intend to use this bot as a hub for SSL hubs/
+# listen ports, secure file transfer, /ctcp botnick schat, or
+# using a certificate to authenticate with NickServ.
+#set ssl-privatekey "eggdrop.key"
+
+# Specify the filename where your SSL certificate is located. If you
+# don't set this, eggdrop will not be able to act as a server in SSL
+# connections, as with most ciphers a certificate and a private key
+# are required on the server side. Must be in PEM format.
+# If you don't have one, you can create it using the following command:
+#
+#   openssl req -new -key eggdrop.key -x509 -out eggdrop.crt -days 365
+#
+# For your convenience, you can type 'make sslcert' after 'make install'
+# and you'll get a key and a certificate in your eggdrop directory.
+# If you installed to a non-default location, use 'make sslcert DEST=...'
+#
+# THIS IS REQUIRED if you intend to use this bot as a hub for SSL hubs/
+# listen ports, secure file transfer, /ctcp botnick schat, or
+# using a certificate to authenticate with NickServ.
+#set ssl-certificate "eggdrop.crt"
+
+# Sets the maximum depth for the certificate chain verification that will
+# be allowed for ssl. When certificate verification is enabled, any chain
+# exceeding this depth will fail verification.
+#set ssl-verify-depth 9
+
+# Specify the location at which CA certificates for verification purposes
+# are located. These certificates are trusted. If you don't set this,
+# certificate verification will not work.
+set ssl-capath "/etc/ssl/"
+#set ssl-cafile ""
+
+# Specify the list of protocols allowed for use with ssl. The protocol list is
+# one or more protocol strings separated by spaces. Available protocols are
+# SSLv2, SSLv3, TLSv1, TLSv1.1, TLSv1.2, TLSv1.3.
+# set ssl-protocols "TLSv1 TLSv1.1 TLSv1.2 TLSv1.3" 
+
+# Specify the list of ciphers (in order of preference) allowed for use with
+# ssl. The cipher list is one or more cipher strings separated by colons,
+# commas or spaces. Unavailable ciphers are silently ignored unless no usable
+# cipher could be found. For the list of possible cipher strings and their
+# meanings, please refer to the ciphers(1) manual.
+# Note: if you set this, the value replaces any ciphers OpenSSL might use by
+# default. To include the default ciphers, you can put DEFAULT as a cipher
+# string in the list.
+# For example:
+#
+#   set ssl-ciphers "DEFAULT ADH"
+#
+# This will make eggdrop allow the default OpenSSL selection plus anonymous
+# DH ciphers.
+#
+#   set ssl-ciphers "ALL"
+#
+# This will make eggdrop allow all ciphers supported by OpenSSL, in a
+# reasonable order.
+#set ssl-ciphers ""
+
+# Specify the location of a dhparam file. This file is necessary if you are
+# using a Diffie-Hellman based key exchange. If you don't know what this is,
+# you are probably safe leaving it commented.
+# You can create a dhparam file using the following command:
+#   openssl dhparam -out dhparam.pem 4096
+#set ssl-dhparam "dhparam.pem"
+
+# Enable certificate authorization. Set to 1 to allow users and bots to
+# identify automatically by their certificate fingerprints. Setting it
+# to 2 to will force fingerprint logins. With a value of 2, users without
+# a fingerprint set or with a certificate UID not matching their handle
+# won't be allowed to login on SSL enabled telnet ports. Fingerprints
+# must be set in advance with the .fprint and .chfinger commands.
+# NOTE: this setting has no effect on plain-text ports.
+#set ssl-cert-auth 0
+
+# You can control SSL certificate verification using the following variables.
+# All of them are flag-based. You can set them by adding together the numbers
+# for all exceptions you want to enable. By default certificate verification
+# is disabled and all certificates are assumed to be valid. The numbers are
+# the following:
+#
+# Enable certificate verification - 1
+# Allow self-signed certificates - 2
+# Don't check peer common or alt names - 4
+# Allow expired certificates - 8
+# Allow certificates which are not valid yet - 16
+# Allow revoked certificates - 32
+# A value of 0 disables verification.
+
+# Control certificate verification for DCC chats (only /dcc chat botnick)
+#set ssl-verify-dcc 0
+
+# Control certificate verification for linking to hubs
+#set ssl-verify-bots 0
+
+# Control certificate verification for SSL listening ports. This includes
+# leaf bots connecting, users telneting in and /ctcp bot chat.
+#set ssl-verify-clients 0
+
+
+##### MORE ADVANCED SETTINGS #####
+
+# Set this to your socks host if your Eggdrop sits behind a firewall. If
+# you use a Sun "telnet passthru" firewall, prefix the host with a '!'.
+#set firewall "!sun-barr.ebay:3666"
+
+# If you have a NAT firewall (your box has an IP in one of the following
+# ranges: 192.168.0.0-192.168.255.255, 172.16.0.0-172.31.255.255,
+# 10.0.0.0-10.255.255.255 and your firewall transparently changes your
+# address to a unique address for your box) or you have IP masquerading
+# between you and the rest of the world, and /dcc chat, /ctcp chat or
+# userfile sharing aren't working, enter your outside IP here. This IP
+# is used for transfers and CTCP replies only, and is different than the
+# vhost4/6 settings. You likely still need to set them.
+#set nat-ip "127.0.0.1"
+
+# If you want all dcc file transfers to use a particular portrange either
+# because you're behind a firewall, or for other security reasons, set it
+# here.
+#set reserved-portrange 2010:2020
+
+# Set the time in minutes that temporary ignores should last.
+set ignore-time 15
+
+# Define here what Eggdrop considers 'hourly'. All calls to it, including such
+# things as note notifying or userfile saving, are affected by this.
+# For example:
+#
+#   set hourly-updates 15
+#
+# The bot will save its userfile 15 minutes past every hour.
+set hourly-updates 00
+
+# Un-comment the next line and set the list of owners of the bot.
+# You NEED to change this setting.
+# This is a list of handles -- usernames in the bot.
+set owner "terminaldweller"
+
+# Who should a note be sent to when new users are learned?
+set notify-newusers "$owner"
+
+# Enter the flags that new users added via the 'hello' message command (see
+# 'learn-users' description further down) should get by default. See 
+# '.help whois' on the partyline for a list of flags and their descriptions.
+set default-flags "hp"
+
+# Enter all user-defined fields that should be displayed in a '.whois'.
+# This will only be shown if the user has one of these extra fields.
+# You might prefer to comment this out and use the userinfo1.0.tcl script
+# which provides commands for changing all of these.
+set whois-fields "url birthday"
+
+# Uncomment these two lines if you wish to disable the .tcl and .set commands.
+# If you select your owners wisely, you should be okay enabling these.
+#unbind dcc n tcl *dcc:tcl
+#unbind dcc n set *dcc:set
+
+# If you enable this setting, only permanent owners (owner setting) will be
+# able to use .tcl and .set. Moreover, if you want only let permanent owners
+# use .dump, then set this to 2.
+# WARNING: setting this to 0 is a security risk, don't do it unless you trust
+# your owners enough to give them shell access to the account the bot is
+# running on. 
+set must-be-owner 1
+
+# Comment out this line to add the 'simul' partyline command (owners can
+# manipulate other people on the party line). Please select owners wisely
+# and use this command ethically!
+unbind dcc n simul *dcc:simul
+
+# Set here the maximum number of socket connections you will allow. You can
+# increase this later, but never decrease it below current usage.
+# If you're using Tcl threads, this is a per-thread maximum.
+set max-socks 100
+
+# Enable this setting if you want +d & +k users to use commands bound as -|-.
+set allow-dk-cmds 1
+
+# If your Eggdrop rejects bots that actually have already disconnected from
+# another hub, but the disconnect information has not yet spread over the
+# botnet due to lag, use this setting. The bot will wait dupwait-timeout
+# seconds before it checks again and then finally reject the bot.
+set dupwait-timeout 5
+
+# Enable cidr support for b/e/I modes. This means the bot will understand
+# and match modes in cidr notation, and will be able to put and enforce such
+# bans or unban itself, if banned with a cidr mask.
+# Do NOT set this, if your network/server does not support cidr!
+set cidr-support 0
+
+# Disable this setting if you do not want to show name and release level of the
+# operating system. You'll probably also want to edit the default motd (in
+# text/motd) and remove its display from there.
+set show-uname 1
+
+
+# You MUST remove this line for your bot to start. This has been added to
+# prevent you from starting up a bot that is not fully configured. Bots
+# that have not been fully configured may join the wrong IRC network, the
+# wrong channels, or generally do things that you do not want. Please make
+# sure that you have double-checked every setting. There's also a similar line
+# lower down, just to make sure you're reading :)
+#die "Please make sure you edit your config file completely."
+
+
+##### MODULES #####
+
+# Below are various settings for the modules included with Eggdrop.
+# PLEASE READ AND EDIT THEM CAREFULLY, even if you're an old hand at
+# Eggdrop, things change.
+
+# This path specifies the path were Eggdrop should look for its modules.
+# If you run the bot from the compilation directory, you will want to set
+# this to "". If you use 'make install' (like all good kiddies do ;), this
+# is a fine default. Otherwise, use your head :)
+set mod-path "modules/"
+
+
+#### PBKDF2 MODULE ####
+
+# IF YOU DON'T READ THIS YOU MAY RENDER YOUR USERFILE USELESS LATER
+# Eggdrop uses hashing in the userfile, so users can have secure passwords.
+# Eggdrop will not start without an encryption module.
+#
+# As of Eggdrop 1.9.0, a new module was added for hashing, the PBKDF2 module.
+# The PBKDF2 module was designed to work with the previous encryption module
+# (blowfish) to make the transition easier. If this is a new bot, you can
+# safely load just the PBKDF2 module. If you are transitioning a userfile from
+# 1.8 or earlier, you should load this AND the blowfish module (below). By doing
+# so, Eggdrop will seamlessly update the old blowfish hashes to the new PBKDF2
+# hashes once a user logs in for the first time, and allow you to (eventually)
+# remove the blowfish module altogether (See the remove-pass setting).
+
+# Outside of the specific case noted above, please note that if you change your
+# encryption method later (i.e. using other modules like a rijndael module), you
+# can't use your current userfile anymore.
+#
+# NOTE FOR BOTNET USERS: If all bots on the botnet are not running the same
+# configuration settings for encryption, you may encounter password-related
+# issues when linking.
+#
+loadmodule pbkdf2
+
+# Cryptographic hash function used. openssl list -digest-algorithms
+#set pbkdf2-method "SHA256"
+
+# Number of rounds. The higher the number, the longer hashing takes; but also
+# the higher the protection against brute force attacks.
+#set pbkdf2-rounds 16000
+
+# Remove old password hashes after updating to a pbkdf2 hash?
+#
+# WARNING: DO NOT CHANGE THIS UNLESS YOU KNOW WHAT YOU ARE DOING
+# Enabling this setting will break compatibility with older Eggdrops by ceasing
+# to write to the PASS field (where password hashes from modules like blowfish
+# are stored), as well as remove an existing PASS hash if found when writing a
+# new pbkdf2 hash. In some scenarios (for example, a hub sharing a userfile to
+# a leaf that does not have a pbkdf2 module loaded) enabling this setting may
+# result in a user having no password set at all.
+#
+# This setting is planned to be enabled by default in Eggdrop 2.0.
+#set remove-pass 0
+
+#### BLOWFISH MODULE ####
+#
+# This module is planned to be removed in Eggdrop 2.0
+#
+# Load this if you intend to use a pre-1.9.0 userfile (Or in other words, do
+# not load this if you are starting this as a fresh bot and are not linking
+# it to a botnet that uses blowfish hashes)
+#
+# You also need to load this if you use a script that employs the
+# encrypt/decrypt Tcl commands.
+#
+loadmodule blowfish
+
+# Specify whether to use ECB or CBC operation modes for the tcl commands
+# 'encrypt' and 'decrypt'. Prior to version 1.9.0, the less secure ecb
+# method was used by default. If you are using these commands with older bots,
+# change this to 'ecb' for compatibility, or upgrade the older bots.
+set blowfish-use-mode cbc
+
+
+#### DNS MODULE (Deprecated) ####
+
+## This module provided asynchronous dns support, but as of v1.9.2, this
+## functionality was moved into the core code. If you are having issues with the
+## new DNS functionality, or just want to continue using this module, compile
+## Eggdrop with the --disable-tdns flag (./configure --disdable-tdns).
+#
+## You really probably don't want to uncomment this!!!!
+#
+#loadmodule dns
+#set dns-servers "8.8.8.8 1.1.1.1 185.222.222.222"
+#set dns-cache 86400
+#set dns-negcache 600
+#set dns-maxsends 4
+#set dns-retrydelay 3
+
+#### CHANNELS MODULE ####
+
+# This module provides channel related support for the bot. Without it,
+# you won't be able to make the bot join a channel or save channel
+# specific userfile information.
+loadmodule channels
+
+# Enter here the filename where dynamic channel settings are stored.
+set chanfile "eggdrop.chan"
+
+# Set this setting to 1 if you want your bot to expire bans/exempts/invites set
+# by other opped bots on the channel.
+set force-expire 0
+
+# Set this setting to 1 if you want your bot to share user greets with other
+# bots on the channel if sharing user data.
+set share-greet 0
+
+# Set this setting to 1 if you want to allow users to store an info line.
+set use-info 1
+
+# Set this setting to 1 if you want to allow both +p and +s channel modes
+# to be enforced at the same time by the chanmode channel setting.
+# Make sure your server supports +ps mixing or you may get endless mode
+# floods.
+set allow-ps 0
+
+# The following settings are used as default values when you .+chan #chan or .tcl
+# channel add #chan. Look below for explanation of every option.
+
+set default-flood-chan 15:60
+set default-flood-deop 3:10
+set default-flood-kick 3:10
+set default-flood-join 5:60
+set default-flood-ctcp 3:60
+set default-flood-nick 5:60
+set default-aop-delay 5:30
+set default-idle-kick 0
+set default-chanmode "nt"
+set default-stopnethack-mode 0
+set default-revenge-mode 0
+set default-ban-type 3
+set default-ban-time 120
+set default-exempt-time 60
+set default-invite-time 60
+
+set default-chanset {
+        -autoop         -autovoice
+        -bitch          +cycle
+        +dontkickops    +dynamicbans
+        +dynamicexempts +dynamicinvites
+        -enforcebans    +greet
+        -inactive       -nodesynch
+        -protectfriends +protectops
+        -revenge        -revengebot
+        -secret         -seen
+        +shared         -statuslog
+        +userbans       +userexempts
+        +userinvites    -protecthalfops
+        -autohalfop     -static
+}
+
+# chanmode +/-<modes>
+#    This setting makes the bot enforce channel modes. It will always add
+#    the +<modes> and remove the -<modes> modes.
+#
+# idle-kick 0
+#    This setting will make the bot check every minute for idle
+#    users. Set this to 0 to disable idle check.
+#
+# stopnethack-mode 0
+#    This setting will make the bot de-op anyone who enters the channel
+#    with serverops. There are seven different modes for this settings:
+#      0 turn off
+#      1 isoptest (allow serverop if registered op)
+#      2 wasoptest (allow serverop if op before split)
+#      3 allow serverop if isop or wasop
+#      4 allow serverop if isop and wasop.
+#      5 If the channel is -bitch, see stopnethack-mode 3
+#        If the channel is +bitch, see stopnethack-mode 1
+#      6 If the channel is -bitch, see stopnethack-mode 2
+#        If the channel is +bitch, see stopnethack-mode 4
+#
+# revenge-mode 0
+#   This settings defines how the bot should punish bad users when
+#   revenging. There are four possible settings:
+#     0 Deop the user.
+#     1 Deop the user and give them the +d flag for the channel.
+#     2 Deop the user, give them the +d flag for the channel, and kick them.
+#     3 Deop the user, give them the +d flag for the channel, kick, and ban them.
+#
+# ban-type 3
+#   This setting defines what type of bans should eggdrop place for +k users or
+#   when revenge-mode is 3.
+#   Available types are:
+#     0 *!user@host
+#     1 *!*user@host
+#     2 *!*@host
+#     3 *!*user@*.host
+#     4 *!*@*.host
+#     5 nick!user@host
+#     6 nick!*user@host
+#     7 nick!*@host
+#     8 nick!*user@*.host
+#     9 nick!*@*.host
+#   You can also specify types from 10 to 19 which correspond to types
+#   0 to 9, but instead of using a * wildcard to replace portions of the
+#   host, only numbers in hostnames are replaced with the '?' wildcard.
+#   Same is valid for types 20-29, but instead of '?', the '*' wildcard
+#   will be used. Types 30-39 set the host to '*'.
+#
+# ban-time 120
+#   Set here how long temporary bans will last (in minutes). If you
+#   set this setting to 0, the bot will never remove them.
+#
+# exempt-time 60
+#   Set here how long temporary exempts will last (in minutes). If you
+#   set this setting to 0, the bot will never remove them. The bot will
+#   check the exempts every X minutes, but will not remove the exempt if
+#   a ban is set on the channel that matches that exempt. Once the ban is
+#   removed, then the exempt will be removed the next time the bot checks.
+#   Please note that this is an IRCnet feature.
+#
+# invite-time 60
+#   Set here how long temporary invites will last (in minutes). If you
+#   set this setting to 0, the bot will never remove them. The bot will
+#   check the invites every X minutes, but will not remove the invite if
+#   a channel is set to +i. Once the channel is -i then the invite will be
+#   removed the next time the bot checks. Please note that this is an IRCnet
+#   feature.
+#
+# aop-delay (minimum:maximum)
+# This is used for autoop, autohalfop, autovoice. If an op or voice joins a
+# channel while another op or voice is pending, the bot will attempt to put
+# both modes on one line.
+#   aop-delay 0   No delay is used.
+#   aop-delay X   An X second delay is used.
+#   aop-delay X:Y A random delay between X and Y is used.
+#
+# need-op { putserv "PRIVMSG #lamest :op me cos i'm lame!" }
+#    This setting will make the bot run the script enclosed in brackets
+#    if it does not have ops. This must be shorter than 120 characters.
+#    If you use scripts like getops.tcl or botnetop.tcl, you don't need
+#    to set this setting.
+#
+# need-invite { putserv "PRIVMSG #lamest :let me in!" }
+#    This setting will make the bot run the script enclosed in brackets
+#    if it needs an invite to the channel. This must be shorter than 120
+#    characters. If you use scripts like getops.tcl or botnetop.tcl, you
+#    don't need to set this setting.
+#
+# need-key { putserv "PRIVMSG #lamest :let me in!" }
+#    This setting will make the bot run the script enclosed in brackets
+#    if it needs the key to the channel. This must be shorter than 120
+#    characters. If you use scripts like getops.tcl or botnetop.tcl, you
+#    don't need to set this setting
+#
+# need-unban { putserv "PRIVMSG #lamest :let me in!" }
+#    This setting will make the bot run the script enclosed in brackets
+#    if it needs to be unbanned on the channel. This must be shorter than
+#    120 characters. If you use scripts like getops.tcl or botnetop.tcl,
+#    you don't need to set this setting
+#
+# need-limit { putserv "PRIVMSG #lamest :let me in!" }
+#    This setting will make the bot run the script enclosed in brackets
+#    if it needs the limit to be raised on the channel. This must be
+#    shorter than 120 characters. If you use scripts like getops.tcl or
+#    botnetop.tcl, you don't need to set this setting
+#
+# flood-chan 15:60
+#    Set here how many channel messages in how many seconds from one
+#    host constitutes a flood. Setting this to 0, 0:X or X:0 disables
+#    flood protection for the channel, where X is an integer >= 0.
+#
+# flood-deop 3:10
+#    Set here how many deops in how many seconds from one host constitutes
+#    a flood. Setting this to 0, 0:X or X:0 disables deop flood protection
+#    for the channel, where X is an integer >= 0.
+#
+# flood-kick 3:10
+#    Set here how many kicks in how many seconds from one host constitutes
+#    a flood. Setting this to 0, 0:X or X:0 disables kick flood protection
+#    for the channel, where X is an integer >= 0.
+#
+# flood-join 5:60
+#    Set here how many joins in how many seconds from one host constitutes
+#    a flood. Setting this to 0, 0:X or X:0 disables join flood protection
+#    for the channel, where X is an integer >= 0.
+#
+# flood-ctcp 3:60
+#    Set here how many channel ctcps in how many seconds from one host
+#    constitutes a flood. Setting this to 0, 0:X or X:0 disables ctcp flood
+#    protection for the channel, where X is an integer >= 0.
+#
+# flood-nick 5:60
+#    Set here how many nick changes in how many seconds from one host
+#    constitutes a flood. Setting this to 0, 0:X or X:0 disables nick flood
+#    protection for the channel, where X is an integer >= 0.
+#
+# A complete list of all available channel settings:
+#
+# enforcebans
+#    When a ban is set, kick people who are on the channel and match
+#    the ban?
+#
+# dynamicbans
+#    Only activate bans on the channel when necessary? This keeps
+#    the channel's ban list from getting excessively long. The bot
+#    still remembers every ban, but it only activates a ban on the
+#    channel when it sees someone join who matches that ban.
+#
+# userbans
+#    Allow bans to be made by users directly? If turned off, the bot
+#    will require all bans to be made through the bot's console.
+#
+# dynamicexempts
+#    Only activate exempts on the channel when necessary? This keeps
+#    the channel's exempt list from getting excessively long. The bot
+#    still remembers every exempt, but it only activates a exempt on
+#    the channel when it sees a ban set that matches the exempt. The
+#    exempt remains active on the channel for as long as the ban is
+#    still active.
+#
+# userexempts
+#    Allow exempts to be made by users directly? If turned off, the
+#    bot will require all exempts to be made through the bot's console.
+#
+# dynamicinvites
+#    Only activate invites on the channel when necessary? This keeps
+#    the channel's invite list from getting excessively long. The bot
+#    still remembers every invite, but the invites are only activated
+#    when the channel is set to invite only and a user joins after
+#    requesting an invite. Once set, the invite remains until the
+#    channel goes to -i.
+#
+# userinvites
+#    Allow invites to be made by users directly? If turned off, the
+#    bot will require all invites to be made through the bot's console.
+#
+# autoop
+#    Op users with the +o flag as soon as they join the channel?
+#    This is insecure and not recommended.
+#
+# autohalfop
+#    Halfop users with the +l flag as soon as they join the channel?
+#    This is insecure and not recommended.
+#
+# bitch
+#    Only let users with +o) flag be opped on the channel?
+#
+# greet
+#    Say a user's info line when they join the channel?
+#
+# protectops
+#    Re-op a user with the +o flag if they get deopped?
+#
+# protecthalfops
+#    Re-halfop a user with the +l flag if they get dehalfopped?
+#
+# protectfriends
+#    Re-op a user with the +f flag if they get deopped?
+#
+# statuslog
+#    Log the channel status line every 5 minutes? This shows the bot's
+#    status on the channel (op, voice, etc.), the channel's modes, and
+#    the total number of members, ops, voices, regular users, and +b,
+#    +e, and +I modes on the channel. A sample status line follows:
+#
+#      [01:40] @#lamest (+istn) : [m/1 o/1 v/4 n/7 b/1 e/5 I/7]
+#
+# revenge
+#    Remember people who deop/kick/ban the bot, valid ops, or friends
+#    and punish them? Users with the +f flag are exempt from revenge.
+#
+# revengebot
+#    This is similar to to the 'revenge' option, but it only triggers
+#    if a bot gets deopped, kicked or banned.
+#
+# autovoice
+#    Voice users with the +v flag when they join the channel?
+#
+# secret
+#    Prevent this channel from being listed on the botnet?
+#
+# shared
+#    Share channel-related user info for this channel?
+#
+# cycle
+#    Cycle the channel when it has no ops?
+#
+# dontkickops
+#    Do you want the bot not to be able to kick users who have the +o
+#    flag, letting them kick-flood for instance to protect the channel
+#    against clone attacks.
+#
+# inactive
+#    This prevents the bot from joining the channel (or makes it leave
+#    the channel if it is already there). It can be useful to make the
+#    bot leave a channel without losing its settings, channel-specific
+#    user flags, channel bans, and without affecting sharing.
+#
+# seen
+#    Respond to seen requests in the channel?  The seen module must be
+#    loaded for this to work.
+#
+# nodesynch
+#    Allow non-ops to perform channel modes? This can stop the bot from
+#    fighting with services such as ChanServ, or from kicking IRCops when
+#    setting channel modes without having ops.
+#
+# static
+#    Allow only permanent owners to remove the channel?
+
+# To add a channel to eggdrop, please enter the bot's partyline and type
+# .+chan #channel. Check also .help chanset and .help chaninfo.
+# You can still add a channel here and it will be saved if you have a
+# chanfile. We recommend you to use the partyline though.
+# 
+channel add #eggdrop
+
+
+#### SERVER MODULE ####
+
+# This module provides the core server support. You have to load this
+# if you want your bot to come on IRC. Not loading this is equivalent
+# to the old NO_IRC define.
+loadmodule server
+
+# Control certificate verification for irc servers. For a description of the
+# possible values, look at the SSL SETTINGS section above.
+set ssl-verify-server 1
+
+## What is your network?
+## Options are:
+##   EFnet
+##   IRCnet
+##   Undernet
+##   DALnet
+##   Libera
+##   freenode
+##   QuakeNet
+##   Rizon
+##   Twitch (This requires twitch.mod to be loaded as well)
+##   Other  (This is a good, sane default option to use if your network/ircd is
+##          not listed here. Additional configuration options for this setting
+##          can be found further down in the IRC MODULE section)
+set net-type "Other"
+
+# Set the nick the bot uses on IRC, and on the botnet unless you specify a
+# separate botnet-nick, here.
+set nick "eggdrop"
+
+# Set the alternative nick which the bot uses on IRC if the nick specified
+# by 'set nick' is unavailable. All '?' characters will be replaced by random
+# numbers.
+set altnick "eggdrop_"
+
+# Set what should be displayed in the real-name field for the bot on IRC.
+# This can not be blank, it has to contain something.
+set realname "/msg eggdrop hello"
+
+# This is a Tcl script to be run immediately after connecting to a server. If
+# you want to authenticate Eggdrop with NickServ, uncomment and edit the middle
+# line below.
+bind evnt - init-server evnt:init_server
+
+proc evnt:init_server {type} {
+  global botnick
+  putquick "MODE $botnick +i-ws"
+#  putserv "PRIVMSG NickServ :identify <password>"
+}
+
+# Set the default port which should be used if none is specified with
+# '.jump' or in 'set servers'.
+set default-port 6697
+
+# This is the bot's server list. The bot will start at the first server listed,
+# and cycle through them whenever it gets disconnected. You need to change these
+# servers to YOUR network's servers.
+#
+# The format is:
+#   server add <server> [port [password]]
+# Prefix the port with a plus sign to attempt a SSL connection:
+#   server add <server> +port [password]
+#
+# Both the port and password fields are optional. If a port isn't specified,
+# the default-port setting will be used. If you want to set a password or use
+# SSL, you must specify a port.
+#
+# This format is new as of version 1.9.0. The previous method using
+# set servers {} will still work for now, but is deprecated and will be removed
+# in a future release.
+server add irc.terminaldweller.com +6697
+
+#### CAP Features ####
+# This section controls IRCv3 capabilities supported natively by Eggdrop. You
+# can enable individual settings here to be requested as part of the
+# registration process with the IRC server. Not all servers support all CAP
+# features. https://ircv3.net/support/networks.html maintains a list of some
+# popular servers, and you can also use '.tcl cap ls' from the partyline
+# to list capabilities available on that server.
+#
+# The capabilities currently known to be supported by Eggdrop are as follows:
+#
+#  account-notify, account-tag, away-notify, chghost, echo-message,
+#  extended-join, invite-notify, message-tags, server-time, sasl, setname,
+#  +typing
+#
+
+# SASL is a method that allows Eggdrop to authenticate with a NickServ service
+# as part of the connection process to a server, eliminating the need to later
+# authenticate via a /msg command.
+#
+# To request SASL authentication via CAP, set this to 1
+set sasl 1
+
+# Set SASL mechanism to authenticate with.
+# Options are:
+#   0 = PLAIN                       (normal user/pass exchange, only encrypted
+#                                    if connected to the IRC server with a
+#                                    SSL/TLS connection)
+#
+#   1 = ECDSA-NIST256P-CHALLENGE    (Uses a certificate; usually requires a
+#                                    public key to be registered with NickServ
+#                                    or other similar service. Set certificate
+#                                    to use in sasl-ecdsa-key setting below)
+#
+#   2 = EXTERNAL                    (Some other method you set up. Certificates
+#                                    used are defined in ssl-certificate and
+#                                    ssl-privatekey settings in SSL section)
+#
+set sasl-mechanism 0
+
+# Set username to authenticate to IRC NickServ with
+set sasl-username "eggdrop"
+
+# Set password to authenticate to IRC NickServ with
+set sasl-password "" # pragma: allowlist secret
+
+# Specify the location of certificate to use for the SASL
+# ecdsa-nist256p-challenge. An ECDSA certificate can be generated with the
+# command:
+#   openssl ecparam -genkey -name prime256v1 -out eggdrop-ecdsa.pem
+#set sasl-ecdsa-key "eggdrop-ecdsa.pem"
+
+# Set SASL failure action
+# If SASL authentication fails, do you want to connect to the server anyway?
+# Set this to 0 to disconnect and retry until success, or 1 to continue
+# connecting to the server without SASL authentication.
+set sasl-continue 0
+#
+# Timeout (in seconds) before giving up SASL authentication
+#set sasl-timeout 15
+
+# To request the account-notify feature via CAP, set this to 1
+set account-notify 1
+
+# To request the extended-join feature via CAP, set this to 1
+set extended-join 1
+
+# To request the invite-notify feature via CAP, set this to 1
+#set invite-notify 0
+
+# To request the message-tags feature via CAP, set this to 1
+#set message-tags 0
+
+# To request the account-tag feature via CAP, set this to 1
+# This can be enabled if necessary for imperfect account tracking if you don't
+# have the WHOX (use_354), account-notify and extended-join features available
+# see doc/ACCOUNTS for details
+#set account-tag 0
+
+# If you have any additional CAP features you would like to request at
+# registration but are not listed above, set them here as space separated
+# strings. Setting features here does not guarantee Eggdrop's ability to support
+# them.
+#set cap-request "feature1 feature2 feature3"
+
+#### End of CAP features ####
+
+# Number of seconds to wait between transmitting queued lines to the server.
+# Lower this value at your own risk. ircd is known to start flood control at
+# 512 bytes/2 seconds.
+set msg-rate 2
+
+# This setting makes the bot try to get his original nickname back if its
+# primary nickname is already in use.
+set keep-nick 1
+
+# This setting makes the bot squelch the error message when rejecting a DCC
+# CHAT, SEND or message command. Normally, Eggdrop notifies the user that the
+# command has been rejected because they don't have access. Note that sometimes
+# IRC server operators detect bots that way.
+set quiet-reject 1
+
+# If you want your bot to answer lower case ctcp requests (non rfc-
+# compliant), set this setting to 1. mIRC will do this, most other
+# clients will not.
+set lowercase-ctcp 0
+
+# Set how many ctcps should be answered at once.
+set answer-ctcp 3
+
+# Set here how many msgs in how many seconds from one host constitutes
+# a flood. If you set this to 0:0, msg flood protection will be disabled.
+set flood-msg 5:60
+
+# Set here how many ctcps in how many seconds from one host constitutes
+# a flood. If you set this to 0:0, ctcp flood protection will be disabled.
+set flood-ctcp 3:60
+
+# This setting defines how long Eggdrop should wait before moving from one
+# server to another on disconnect. If you set 0 here, Eggdrop will not wait
+# at all and will connect instantly. Setting this too low could result in
+# your bot being K:Lined.
+set server-cycle-wait 60
+
+# Set here how long Eggdrop should wait for a response when connecting to a
+# server before giving up and moving on to next server.
+set server-timeout 60
+
+# Set this to 1 if Eggdrop should check for stoned servers? (where the
+# server connection has died, but Eggdrop hasn't been notified yet).
+set check-stoned 1
+
+# If you want your bot to exit the server if it receives an ERROR message,
+# set this to 1.
+set serverror-quit 1
+
+# Set here the maximum number of lines to queue to the server. If you're
+# going to dump large chunks of text to people over IRC, you will probably
+# want to raise this. 300 is fine for most people though.
+set max-queue-msg 300
+
+# If you want Eggdrop to trigger binds for ignored users, set this to 1.
+set trigger-on-ignore 0
+
+# This setting configures PUBM and MSGM binds to be exclusive of PUB and MSG
+# binds. This means if a MSGM bind with the mask "*help*" exists and is
+# triggered, any MSG bindings with "help" in their mask will not be
+# triggered. Don't enable this unless you know what you are doing!
+set exclusive-binds 0
+
+# Allow identical messages in the mode queue?
+set double-mode 1
+
+# Allow identical messages in the server queue?
+set double-server 1
+
+# Allow identical messages in the help queue?
+set double-help 1
+
+# This optimizes the kick queue. It also traces nick changes and parts in
+# the channel and changes the kick queue accordingly.
+# Options are:
+#   0 = Turn it off.
+#   1 = Optimize the kick queue by summarizing kicks.
+#   2 = Trace nick changes and parts on the channel and change the queue
+#       accordingly. For example, bot will not try to kick users who have
+#       already parted the channel.
+# ATTENTION: Setting 2 is very CPU intensive.
+set optimize-kicks 1
+
+# If your network supports more recipients per command then 1, you can
+# change this behavior here. Set this to the number of recipients per
+# command, or set this to 0 for unlimited.
+set stack-limit 4
+
+# Sets the default RPL_ISUPPORT (raw 005) information to use as a fallback.
+# These MUST be compatible to all IRCds you might want to connect to.
+# The actual server settings overwrite these, so you shouldn't need to modify.
+#set isupport-default "CASEMAPPING=rfc1459 CHANNELLEN=80 NICKLEN=9 CHANTYPES=#& PREFIX=(ov)@+ CHANMODES=b,k,l,imnpst MODES=3 MAXCHANNELS=10 TOPICLEN=250 KICKLEN=250 STATUSMSG=@+"
+
+### SERVER MODULE - OTHER NETWORKS (net-type "Other") ###
+
+# This settings defines how umode +r is understood by Eggdrop. Some networks
+# use +r to indicate a restricted connection. If this is your case, and you
+# want your bot to leave restricted servers and jump to the next server on its
+# list, then set it to 1. The default setting is 0.
+#set check-mode-r 0
+
+# This setting allows you to specify the maximum nick-length supported by your
+# network. The default setting is 9. The maximum supported length by Eggdrop
+# is 32.
+#set nick-len 9
+
+
+#### CTCP MODULE ####
+
+# This module provides the normal ctcp replies that you'd expect.
+# Without it loaded, CTCP CHAT will not work. The server module
+# is required for this module to function.
+loadmodule ctcp
+
+# Set here how the ctcp module should answer ctcps.
+# Options are:
+#   0 = Normal behavior is used.
+#   1 = The bot ignores all ctcps, except for CHAT and PING requests
+#       by users with the +o flag.
+#   2 = Normal behavior is used, however the bot will not answer more
+#       than X ctcps in Y seconds (defined by 'set flood-ctcp').
+set ctcp-mode 0
+
+# There are also several variables to help make your bot less noticeable.
+# They are: ctcp-version, ctcp-finger, and ctcp-userinfo. You can use set to set
+# them to values you'd like.
+
+
+#### IRC MODULE ####
+
+# This module provides basic IRC support for your bot. You have to
+# load this if you want your bot to come on IRC. The server and channels
+# modules must be loaded for this module to function.
+loadmodule irc
+
+# Set this to 1 if you want to bounce all server bans.
+set bounce-bans 0
+
+# Set this to 1 if you want to bounce all server exemptions (+e modes).
+# This is disabled if use-exempts is disabled.
+set bounce-exempts 0
+
+# Set this to 1 if you want to bounce all server invitations (+I modes).
+# This is disabled if use-invites is disabled.
+set bounce-invites 0
+
+# Set this to 1 if you want to bounce all server modes.
+set bounce-modes 0
+
+# The following settings should be left commented unless the default values
+# are being overridden. By default, exempts and invites are on for EFnet and
+# IRCnet, but off for all other large networks. This behavior can be modified
+# with the following 2 flags. If your network doesn't support +e/+I modes then
+# you will be unable to use these features.
+#
+# Do you want to enable exempts (+e modes)?
+#set use-exempts 0
+
+# Do you want to enable invites (+I modes)?
+#set use-invites 0
+
+# If you want people to be able to add themselves to the bot's userlist
+# with the default userflags (defined above in the config file) via the
+# 'hello' msg command, set this to 1.
+set learn-users 0
+
+# Set here the time (in seconds) to wait for someone to return from a netsplit
+# (i.e. wasop will expire afterwards). Set this to 1500 on IRCnet since its
+# nick delay stops after 30 minutes.
+set wait-split 600
+
+# Set here the time (in seconds) that someone must have been off-channel
+# before re-displaying their info line.
+set wait-info 180
+
+# Set this to the maximum number of bytes to send in the arguments
+# of modes sent to the server. Most servers default this to 200.
+set mode-buf-length 200
+
+# Many IRCops find bots by seeing if they reply to 'hello' in a msg.
+# You can change this to another word by un-commenting the following
+# two lines and changing "myword" to the word wish to use instead of
+# 'hello'. It must be a single word.
+#unbind msg - hello *msg:hello
+#bind msg - myword *msg:hello
+
+# Many takeover attempts occur due to lame users blindly /msg ident'ing to
+# the bot and attempting to guess passwords. We now unbind this command by
+# default to discourage them. You can enable these commands by commenting the
+# following two lines.
+unbind msg - ident *msg:ident
+unbind msg - addhost *msg:addhost
+
+# Some IRC servers are using some non-standard op-like channel prefixes/modes.
+# Define them here so the bot can recognize them. Just "@" should be fine for
+# most networks. Un-comment the second line for some UnrealIRCds.
+
+set opchars "@"
+#set opchars "@&~"
+
+# If you are so lame you want the bot to display peoples info lines, even
+# when you are too lazy to add their chanrecs to a channel, set this to 1.
+# *NOTE* This means *every* user with an info line will have their info
+# line displayed on EVERY channel they join (provided they have been gone
+# longer than wait-info).
+set no-chanrec-info 0
+
+### IRC MODULE - IRCnet SPECIFIC FEATURES (net-type "IRCnet") ###
+
+# Attention: Use these settings *only* if you set 'net-type' to "IRCnet"!
+
+# At the moment, the current IRCnet IRCd version (2.10) doesn't support the
+# mixing of b, o and v modes with e and I modes. This might be changed in the
+# future, so use 1 at the moment for this setting.
+set prevent-mixing 1
+
+### IRC MODULE - OTHER NETWORKS (net-type "Other") ###
+
+# Attention: Use these settings *only* if you set net-type to "Other"!
+
+# If your network supports more users per kick command then 1, you can
+# change this behavior here. Set this to the number of users to kick at
+# once, or set this to 0 for all at once.
+#set kick-method 1
+
+# Some networks don't include the +l limit and +k or -k key modes
+# in the modes-per-line limitation. Set include-lk to 0 for
+# these networks.
+#set include-lk 1
+
+# If your network doesn't use rfc 1459 compliant string matching routines,
+# set this to 0.
+#set rfc-compliant 1
+
+
+#### TWITCH MODULE ####
+
+# This module attempts to provide connectivity with the Twitch gaming platform.
+# While Twitch provides an IRC gateway to connect with it's streaming service,
+# it does not claim to (and certainly does not) follow the IRC RFC in any
+# meaningful way. The intent of this module is not to provide the full spectrum
+# of management functions typically associated with Eggdrop; please see the docs
+# for additional information. Only load this if you are connecting to Twitch!
+# Please see doc/TWITCH for Twitch-specific setup information, like how to
+# configure the required CAP settings in the IRC section above.
+#loadmodule twitch
+
+
+#### TRANSFER MODULE ####
+
+# The transfer module provides DCC SEND/GET support and userfile transfer
+# support for userfile sharing. Un-comment the next line to load it if you
+# need this functionality.
+#loadmodule transfer
+
+# Set here the maximum number of simultaneous downloads to allow for
+# each user.
+set max-dloads 3
+
+# Set here the block size for dcc transfers. ircII uses 512 bytes,
+# but admits that it may be too small. 1024 is standard these days.
+# 0 is turbo-dcc (recommended).
+set dcc-block 0
+
+# Enable this setting if you want to copy files to a temporary location before
+# sending or receiving them. This might be useful for file stability, but if
+# your directories are NFS mounted, it's a pain. Setting this to 1 is not
+# advised for big files or if you're low on disk space.
+set copy-to-tmp 1
+
+# Set here the time (in seconds) to wait before an inactive transfer times out.
+set xfer-timeout 30
+
+# By default, Eggdrop will abort the linking process if userfile sharing is
+# enabled but the userfile transfer fails. Set this to 0 to keep the bots
+# linked if the userfile transfer fails and retry every minute (both bots must
+# be v1.9.0 or higher).
+#set sharefail-unlink 1
+
+#### SHARE MODULE ####
+
+# This module provides userfile sharing support between two directly
+# linked bots. The transfer and channels modules are required for this
+# module to correctly function. Un-comment the following line to load
+# the share module.
+#loadmodule share
+
+# Settings in this section must be un-commented before setting.
+
+# When two bots get disconnected, this setting allows them to create a
+# resync buffer which saves all changes done to the userfile during
+# the disconnect. When they reconnect, they will not have to transfer
+# the complete user file, but, instead, just send the resync buffer.
+#
+# NOTE: This has been known to cause loss of channel flags and other
+# problems. Using this setting is not recommended.
+#set allow-resync 0
+
+# This setting specifies how long to hold another bots resync data
+# before flushing it.
+#set resync-time 900
+
+# When sharing user lists, DON'T ACCEPT global flag changes from other bots?
+# NOTE: The bot will still send changes made on the bot, it just won't accept
+# any global flag changes from other bots. This overrides the private-globals
+# setting (below).
+#set private-global 0
+
+# When sharing user lists, if private-global isn't set, which global flag
+# changes from other bots should be ignored?
+#set private-globals "mnot"
+
+# When sharing user lists, don't accept ANY userfile changes from other
+# bots? Paranoid people should use this feature on their hub bot. This
+# will force all userlist changes to be made via the hub.
+#set private-user 0
+
+# This setting makes the bot discard its own bot records in favor of
+# the ones sent by the hub.
+# NOTE: No passwords or botflags are shared, only ports and
+# address are added to sharing procedure. This only works with hubs that
+# are v1.5.1 or higher.
+#set override-bots 0
+
+
+#### COMPRESS MODULE ####
+
+# This module provides support for file compression. This allows the
+# bot to transfer compressed user files and therefore save a significant amount
+# of bandwidth. The share module must be loaded to load this module. Un-comment
+# the following line to the compress module.
+#loadmodule compress
+
+# Allow compressed sending of user files? The user files are compressed with
+# the compression level defined in `compress-level'.
+set share-compressed 1
+
+# This is the default compression level used. These levels are the same as
+# those used by GNU gzip.
+#set compress-level 9
+
+
+#### FILESYSTEM MODULE ####
+
+# This module provides an area within the bot where users can store and
+# manage files. With this module, the bot is usable as a file server. The
+# transfer module is required for this module to function. Un-comment
+# the following line to load the filesys module.
+#loadmodule filesys
+
+# Set here the 'root' directory for the file system.
+set files-path "/home/mydir/filesys"
+
+# If you want to allow uploads, set this to the directory uploads
+# should be put into. Set this to "" if you don't want people to
+# upload files to your bot.
+set incoming-path "/home/mydir/filesys/incoming"
+
+# If you don't want to have a central incoming directory, but instead
+# want uploads to go to the current directory that a user is in, set
+# this setting to 1.
+set upload-to-pwd 0
+
+# Eggdrop creates a '.filedb' file in each subdirectory of your file area
+# to keep track of its own file system information. If you can't do that (for
+# example, if the dcc path isn't owned by you, or you just don't want it to do
+# that) specify a path here where you'd like all of the database files to be
+# stored instead.
+set filedb-path ""
+
+# Set here the maximum number of people that can be in the file area at once.
+# Setting this to 0 makes it effectively infinite.
+set max-file-users 20
+
+# Set here the maximum allowable file size that will be received (in KB).
+# Setting this to 0 makes it effectively infinite.
+set max-filesize 1024
+
+
+#### NOTES MODULE ####
+
+# This module provides support for storing of notes for users from each other.
+# Note sending between currently online users is supported in the core, this is
+# only for storing the notes for later retrieval.
+loadmodule notes
+
+# Set here the filename where private notes between users are stored.
+set notefile "eggdrop.notes"
+
+# Set here the maximum number of notes to allow to be stored for each user
+# (to prevent flooding).
+set max-notes 50
+
+# Set here how long (in days) to store notes before expiring them.
+set note-life 60
+
+# Set this to 1 if you want to allow users to specify a forwarding address
+# for forwarding notes to another account on another bot.
+set allow-fwd 0
+
+# Set this to 1 if you want the bot to let people know hourly if they have
+# any notes.
+set notify-users 0
+
+# Set this to 1 if you want the bot to let people know on join if they have
+# any notes.
+set notify-onjoin 1
+
+# Comment out this next line. Otherwise, your bot won't start.
+# die "You didn't edit your config file completely like you were told, did you?"
+
+# This next line checks if eggdrop is being executed from the source directory
+if {[file exists aclocal.m4]} { die {You are attempting to run Eggdrop from the source directory. Please finish installing Eggdrop by running "make install" and run it from the install location.} }
+
+
+#### CONSOLE MODULE ####
+
+# This module provides storage of console settings when you exit the
+# bot or type .store on the partyline.
+loadmodule console
+
+# Save users console settings automatically? Otherwise, they have
+# to use the .store command.
+set console-autosave 1
+
+# If a user doesn't have any console settings saved, which channel
+# do you want them automatically put on?
+set force-channel 0
+
+# Enable this setting if a user's global info line should be displayed
+# when they join a botnet channel.
+set info-party 0
+
+
+#### WOOBIE MODULE ####
+
+# This is for demonstrative purposes only. If you are looking for starting
+# point in writing modules, woobie is the right thing.
+#loadmodule woobie
+
+
+#### SEEN MODULE ####
+
+# This module provides very basic seen commands via msg, on channel or via dcc.
+# This module works only for users in the bot's userlist. If you are looking for
+# a better and more advanced seen module, try the gseen module by G'Quann. You
+# can find it at http://www.kreativrauschen.com/gseen.mod/.
+#loadmodule seen
+
+
+#### ASSOC MODULE ####
+
+# This module provides assoc support, i.e. naming channels on the botnet.
+# You can load it by un-commenting the following line.
+#loadmodule assoc
+
+
+#### UPTIME MODULE ####
+
+# This module reports uptime statistics to http://uptime.eggheads.org.
+# Go look and see what your uptime is! It takes about 9 hours to show up,
+# so if your bot isn't listed, try again later. The server module must be
+# loaded for this module to function.
+#
+# Information sent to the server includes the bot's uptime, botnet-nick,
+# server, version, and IP address. This information is stored in a temporary
+# logfile for debugging purposes only. The only publicly available information
+# will be the bot's botnet-nick, version and uptime. If you do not wish for this
+# information to be sent, comment out the following line.
+loadmodule uptime
+
+
+#### IDENT MODULE ####
+
+# This module adds Eggdrop support for the externally-provided oident
+# service, or alternatively the ability for Eggdrop to act as its own ident
+# daemon. Please read the docs at doc/settings/mod.ident for additional
+# information on correctly configuring this section. If you don't know
+# what ident or oident are, it is safe to leave this section commented.
+#loadmodule ident
+
+# Set the ident method you wish to use. Each of these methods requires
+# some form of external configuration in order to function. See
+# doc/settings/mod.ident for additional information.
+# Options are:
+#   0 = oidentd
+#         Your bot will overwrite $HOME/.oidentd.conf right before opening the
+#         socket to the IRC server with the global reply.
+#         NOTE: requires the oidentd service to be running on the host machine
+#   1 = Builtin
+#         Your bot will automatically turn its builtin identd on and off when
+#         needed so it shouldn't conflict with other identds that do the same.
+#         NOTE: Eggdrop must be granted permissions on the host system to bind
+#         to port 113. 
+#set ident-method 0
+
+# Set the ident port to use for ident-method 1.
+#set ident-port 113
+
+##### SCRIPTS #####
+
+# This is a good place to load scripts to use with your bot.
+
+# This line loads script.tcl from the scripts directory inside your Eggdrop's
+# directory. All scripts should be put there, although you can place them where
+# you like as long as you can supply a fully qualified path to them.
+#
+# source scripts/script.tcl
+
+source scripts/alltools.tcl
+source scripts/action.fix.tcl
+
+# This script enhances Eggdrop's built-in dcc '.whois' command to allow all
+# users to '.whois' their own handle.
+source scripts/dccwhois.tcl
+
+# This script provides many useful informational functions, like setting
+# users' URLs, e-mail address, ICQ numbers, etc. You can modify it to add
+# extra entries.
+source scripts/userinfo.tcl
+loadhelp userinfo.help
+
+# Use this script for Tcl and Eggdrop backwards compatibility.
+# NOTE: This can also cause problems with some newer scripts.
+#source scripts/compat.tcl
+
+# A few IRC networks (EFnet and Undernet) have added some simple checks to
+# prevent drones from connecting to the IRC network. While these checks are
+# fairly trivial, they will prevent your Eggdrop from automatically
+# connecting. In an effort to work-around these, we have developed a couple of
+# TCL scripts to automate the process.
+
+if {[info exists net-type]} {
+  switch -- ${net-type} {
+    "EFnet" {
+      # EFnet
+      source scripts/quotepong.tcl
+    }
+    "0" {
+      # EFnet
+      source scripts/quotepong.tcl
+    }
+  }
+}