remove gc

6 files changed, 0 insertions, 2594 deletions

diff --git a/gc/Makefile b/gc/Makefile
deleted file mode 100644
index 61a0b64..0000000
--- a/gc/Makefile
+++ /dev/null
@@ -1,632 +0,0 @@
-# This is the original manually generated Makefile.  It may still be used
-# to build the collector.
-#
-# Primary targets:
-# gc.a - builds basic library
-# c++ - adds C++ interface to library
-# cords - adds cords (heavyweight strings) to library
-# test - prints porting information, then builds basic version of gc.a,
-#      	 and runs some tests of collector and cords.  Does not add cords or
-#	 c++ interface to gc.a
-# cord/de - builds dumb editor based on cords.
-ABI_FLAG= 
-# ABI_FLAG should be the cc flag that specifies the ABI.  On most
-# platforms this will be the empty string.  Possible values:
-# +DD64 for 64-bit executable on HP/UX.
-# -n32, -n64, -o32 for SGI/MIPS ABIs.
-
-AS_ABI_FLAG=$(ABI_FLAG)
-# ABI flag for assembler.  On HP/UX this is +A64 for 64 bit
-# executables.
-
-CC=cc $(ABI_FLAG)
-CXX=g++ $(ABI_FLAG)
-AS=as $(AS_ABI_FLAG)
-#  The above doesn't work with gas, which doesn't run cpp.
-#  Define AS as `gcc -c -x assembler-with-cpp' instead.
-
-# Redefining srcdir allows object code for the nonPCR version of the collector
-# to be generated in different directories.
-srcdir= .
-VPATH= $(srcdir)
-
-CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EXECUTE_PERMISSION -DSILENT -DALL_INTERIOR_POINTERS
-
-# To build the parallel collector on Linux, add to the above:
-# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
-# To build the parallel collector n a static library on HP/UX, add to the above:
-# -DGC_HPUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC -DUSE_HPUX_TLS -D_POSIX_C_SOURCE=199506L
-
-# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
-# part of the build process, i.e. on the build machine.  These will usually
-# be the same as CC and CFLAGS, except in a cross-compilation environment.
-# Note that HOSTCFLAGS should include any -D flags that affect thread support.
-HOSTCC=$(CC)
-HOSTCFLAGS=$(CFLAGS)
-
-# For dynamic library builds, it may be necessary to add flags to generate
-# PIC code, e.g. -fPIC on Linux.
-
-# Setjmp_test may yield overly optimistic results when compiled
-# without optimization.
-
-# These define arguments influence the collector configuration:
-# -DSILENT disables statistics printing, and improves performance.
-# -DFIND_LEAK causes GC_find_leak to be initially set.
-#   This causes the collector to assume that all inaccessible
-#   objects should have been explicitly deallocated, and reports exceptions.
-#   Finalization and the test program are not usable in this mode.
-# -DGC_SOLARIS_THREADS enables support for Solaris (thr_) threads.
-#   (Clients should also define GC_SOLARIS_THREADS and then include
-#   gc.h before performing thr_ or dl* or GC_ operations.)
-#   Must also define -D_REENTRANT.
-# -DGC_SOLARIS_PTHREADS enables support for Solaris pthreads.
-#   (Internally this define GC_SOLARIS_THREADS as well.)
-# -DGC_IRIX_THREADS enables support for Irix pthreads.  See README.irix.
-# -DGC_HPUX_THREADS enables support for HP/UX 11 pthreads.
-#   Also requires -D_REENTRANT or -D_POSIX_C_SOURCE=199506L. See README.hp.
-# -DGC_LINUX_THREADS enables support for Xavier Leroy's Linux threads.
-#   see README.linux.  -D_REENTRANT may also be required.
-# -DGC_OSF1_THREADS enables support for Tru64 pthreads.  Untested.
-# -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads.  Untested.
-#   Appeared to run into some underlying thread problems.
-# -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads.
-#   See README.DGUX386.
-# -DALL_INTERIOR_POINTERS allows all pointers to the interior
-#   of objects to be recognized.  (See gc_priv.h for consequences.)
-#   Alternatively, GC_all_interior_pointers can be set at process
-#   initialization time.
-# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
-#   usually causing it to use less space in such situations.
-#   Incremental collection no longer works in this case.
-# -DLARGE_CONFIG tunes the collector for unusually large heaps.
-#   Necessary for heaps larger than about 500 MB on most machines.
-#   Recommended for heaps larger than about 64 MB.
-# -DDONT_ADD_BYTE_AT_END is meaningful only with -DALL_INTERIOR_POINTERS or
-#   GC_all_interior_pointers = 1.  Normally -DALL_INTERIOR_POINTERS
-#   causes all objects to be padded so that pointers just past the end of
-#   an object can be recognized.  This can be expensive.  (The padding
-#   is normally more than one byte due to alignment constraints.)
-#   -DDONT_ADD_BYTE_AT_END disables the padding.
-# -DNO_SIGNALS does not disable signals during critical parts of
-#   the GC process.  This is no less correct than many malloc 
-#   implementations, and it sometimes has a significant performance
-#   impact.  However, it is dangerous for many not-quite-ANSI C
-#   programs that call things like printf in asynchronous signal handlers.
-#   This is on by default.  Turning it off has not been extensively tested with
-#   compilers that reorder stores.  It should have been.
-# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
-#   have execute permission, i.e. it may be impossible to execute
-#   code from the heap.  Currently this only affects the incremental
-#   collector on UNIX machines.  It may greatly improve its performance,
-#   since this may avoid some expensive cache synchronization.
-# -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
-#   the  new syntax "operator new[]" for allocating and deleting arrays.
-#   See gc_cpp.h for details.  No effect on the C part of the collector.
-#   This is defined implicitly in a few environments.  Must also be defined
-#   by clients that use gc_cpp.h.
-# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be
-#   defined as aliases for X, GC_realloc, and GC_free, respectively.
-#   Calloc and strdup are redefined in terms of the new malloc.  X should
-#   be either GC_malloc or GC_malloc_uncollectable, or
-#   GC_debug_malloc_replacement.  (The latter invokes GC_debug_malloc
-#   with dummy source location information, but still results in
-#   properly remembered call stacks on Linux/X86 and Solaris/SPARC.)
-#   The former is occasionally useful for working around leaks in code
-#   you don't want to (or can't) look at.  It may not work for
-#   existing code, but it often does.  Neither works on all platforms,
-#   since some ports use malloc or calloc to obtain system memory.
-#   (Probably works for UNIX, and win32.)  If you build with DBG_HDRS_ALL,
-#   you should only use GC_debug_malloc_replacement as a malloc
-#   replacement.
-# -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X.
-#   The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,
-#   together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to
-#   generate leak reports with call stacks for both malloc and realloc.
-# -DIGNORE_FREE turns calls to free into a noop.  Only useful with
-#   -DREDIRECT_MALLOC.
-# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
-#   Reduces code size slightly at the expense of debuggability.
-# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
-#   order by specifying a nonstandard finalization mark procedure  (see
-#   finalize.c).  Objects reachable from finalizable objects will be marked
-#   in a sepearte postpass, and hence their memory won't be reclaimed.
-#   Not recommended unless you are implementing a language that specifies
-#   these semantics.  Since 5.0, determines only only the initial value
-#   of GC_java_finalization variable.
-# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
-#   to explicit GC_invoke_finalizers() calls.
-#   In 5.0 this became runtime adjustable, and this only determines the
-#   initial value of GC_finalize_on_demand.
-# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
-#   This is useful if either the vendor malloc implementation is poor,
-#   or if REDIRECT_MALLOC is used.
-# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
-#   sets the heap block size.  Each heap block is devoted to a single size and
-#   kind of object.  For the incremental collector it makes sense to match
-#   the most likely page size.  Otherwise large values result in more
-#   fragmentation, but generally better performance for large heaps.
-# -DUSE_MMAP use MMAP instead of sbrk to get new memory.
-#   Works for Solaris and Irix.
-# -DUSE_MUNMAP causes memory to be returned to the OS under the right
-#   circumstances.  This currently disables VM-based incremental collection.
-#   This is currently experimental, and works only under some Unix,
-#   Linux and Windows versions.
-# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
-#   GC_scratch_alloc() to get stack memory.
-# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
-#   the garbage collector detects a value that looks almost, but not quite,
-#   like a pointer, print both the address containing the value, and the
-#   value of the near-bogus-pointer.  Can be used to identifiy regions of
-#   memory that are likely to contribute misidentified pointers.
-# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
-#   for objects allocated with the debugging allocator.  If all objects
-#   through GC_MALLOC with GC_DEBUG defined, this allows the client
-#   to determine how particular or randomly chosen objects are reachable
-#   for debugging/profiling purposes.  The gc_backptr.h interface is
-#   implemented only if this is defined.
-# -DGC_ASSERTIONS Enable some internal GC assertion checking.  Currently
-#   this facility is only used in a few places.  It is intended primarily
-#   for debugging of the garbage collector itself, but could also
-# -DDBG_HDRS_ALL Make sure that all objects have debug headers.  Increases
-#   the reliability (from 99.9999% to 100%) of some of the debugging
-#   code (especially KEEP_BACK_PTRS).  Makes -DSHORT_DBG_HDRS possible.
-#   Assumes that all client allocation is done through debugging
-#   allocators.
-# -DSHORT_DBG_HDRS Assume that all objects have debug headers.  Shorten
-#   the headers to minimize object size, at the expense of checking for
-#   writes past the end of an object.  This is intended for environments
-#   in which most client code is written in a "safe" language, such as
-#   Scheme or Java.  Assumes that all client allocation is done using
-#   the GC_debug_ functions, or through the macros that expand to these,
-#   or by redirecting malloc to GC_debug_malloc_replacement.
-#   (Also eliminates the field for the requested object size.)
-#   occasionally be useful for debugging of client code.  Slows down the
-#   collector somewhat, but not drastically.
-# -DSAVE_CALL_COUNT=<n> Set the number of call frames saved with objects
-#   allocated through the debugging interface.  Affects the amount of
-#   information generated in leak reports.  Only matters on platforms
-#   on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
-#   and Solaris/SPARC and platforms that provide execinfo.h.
-#   Default is zero.  On X86, client
-#   code should NOT be compiled with -fomit-frame-pointer.
-# -DSAVE_CALL_NARGS=<n> Set the number of functions arguments to be
-#   saved with each call frame.  Default is zero.  Ignored if we
-#   don't know how to retrieve arguments on the platform.
-# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
-#   altered stubborn objects, at substantial performance cost.
-#   Use only for debugging of the incremental collector.
-# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
-#   that include a pointer to a type descriptor in each allocated object).
-#   Building this way requires an ANSI C compiler.
-# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
-#   prefetch instructions.  No effect except on X86 Linux platforms.
-#   Assumes a very recent gcc-compatible compiler and assembler.
-#   (Gas prefetcht0 support was added around May 1999.)
-#   Empirically the code appears to still run correctly on Pentium II
-#   processors, though with no performance benefit.  May not run on other
-#   X86 processors?  In some cases this improves performance by
-#   15% or so.
-# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
-#   prefetch instructions.  Same restrictions as USE_I686_PREFETCH.
-#   Minimally tested.  Didn't appear to be an obvious win on a K6-2/500.
-# -DGC_USE_LD_WRAP in combination with the old flags listed in README.linux
-#   causes the collector some system and pthread calls in a more transparent
-#   fashion than the usual macro-based approach.  Requires GNU ld, and
-#   currently probably works only with Linux.
-# -DTHREAD_LOCAL_ALLOC defines GC_local_malloc(), GC_local_malloc_atomic()
-#   and GC_local_gcj_malloc().  Needed for gc_gcj.h interface.  These allocate
-#   in a way that usually does not involve acquisition of a global lock.
-#   Currently requires -DGC_LINUX_THREADS, but should be easy to port to
-#   other pthreads environments.  Recommended for multiprocessors.
-# -DPARALLEL_MARK allows the marker to run in multiple threads.  Recommended
-#   for multiprocessors.  Currently requires Linux on X86 or IA64, though
-#   support for other Posix platforms should be fairly easy to add,
-#   if the thread implementation is otherwise supported.
-# -DNO_GETENV prevents the collector from looking at environment variables.
-#   These may otherwise alter its configuration, or turn off GC altogether.
-#   I don't know of a reason to disable this, except possibly if the
-#   resulting process runs as a privileged user?
-# -DUSE_GLOBAL_ALLOC.  Win32 only.  Use GlobalAlloc instead of
-#   VirtualAlloc to allocate the heap.  May be needed to work around
-#   a Windows NT/2000 issue.  Incompatible with USE_MUNMAP.
-#   See README.win32 for details.
-# -DMAKE_BACK_GRAPH. Enable GC_PRINT_BACK_HEIGHT environment variable.
-#   See README.environment for details.  Experimental. Limited platform
-#   support.  Implies DBG_HDRS_ALL.  All allocation should be done using
-#   the debug interface.
-# -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus
-#   makes incremental collection easier.  Was enabled by default until 6.0.
-#   Rarely used, to my knowledge.
-# -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed
-#   from a multithreaded parent.  Currently only supported by linux_threads.c.
-#   (Similar code should work on Solaris or Irix, but it hasn't been tried.)
-#
-
-CXXFLAGS= $(CFLAGS) 
-AR= ar
-RANLIB= ranlib
-
-
-OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o backgraph.o
-
-CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c backgraph.c
-
-CORD_SRCS=  cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
-
-CORD_OBJS=  cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
-
-SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s alpha_mach_dep.S \
-    sparc_mach_dep.S include/gc.h include/gc_typed.h \
-    include/private/gc_hdrs.h include/private/gc_priv.h \
-    include/private/gcconfig.h include/private/gc_pmark.h \
-    include/gc_inl.h include/gc_inline.h include/gc_mark.h \
-    threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
-    gcname.c include/weakpointer.h include/private/gc_locks.h \
-    gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
-    include/new_gc_alloc.h include/gc_allocator.h \
-    include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \
-    include/private/solaris_threads.h include/gc_backptr.h \
-    hpux_test_and_clear.s include/gc_gcj.h \
-    include/gc_local_alloc.h include/private/dbg_mlc.h \
-    include/private/specific.h powerpc_macosx_mach_dep.s \
-    include/leak_detector.h include/gc_amiga_redirects.h \
-    include/gc_pthread_redirects.h ia64_save_regs_in_stack.s \
-    $(CORD_SRCS)
-
-DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
-	doc/README.amiga doc/README.cords doc/debugging.html \
-	doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
-	doc/README.sgi doc/README.solaris2 doc/README.uts \
-	doc/README.win32 doc/barrett_diagram doc/README \
-        doc/README.contributors doc/README.changes doc/gc.man \
-	doc/README.environment doc/tree.html doc/gcdescr.html \
-	doc/README.autoconf doc/README.macros doc/README.ews4800 \
-	doc/README.DGUX386 doc/README.arm.cross
-
-TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
-	tests/leak_test.c tests/thread_leak_test.c
-
-GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \
-		 libtool.m4 install-sh configure.host Makefile.in \
-		 ltconfig aclocal.m4 config.sub config.guess \
-		 ltmain.sh mkinstalldirs depcomp missing
-
-OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \
-		 BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \
-		 PCR-Makefile SMakefile.amiga Makefile.DLLs \
-		 digimars.mak Makefile.direct
-#	Makefile and Makefile.direct are copies of each other.
-
-OTHER_FILES= Makefile setjmp_t.c callprocs pc_excludes \
-           MacProjects.sit.hqx MacOS.c \
-           Mac_files/datastart.c Mac_files/dataend.c \
-           Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
-           add_gc_prefix.c gc_cpp.cpp win32_threads.c \
-	   version.h AmigaOS.c \
-	   $(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)
-
-CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
-	$(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
-
-UTILS= if_mach if_not_there threadlibs
-
-# Libraries needed for curses applications.  Only needed for de.
-CURSES= -lcurses -ltermlib
-
-# The following is irrelevant on most systems.  But a few
-# versions of make otherwise fork the shell specified in
-# the SHELL environment variable.
-SHELL= /bin/sh
-
-SPECIALCFLAGS = -I$(srcdir)/include
-# Alternative flags to the C compiler for mach_dep.c.
-# Mach_dep.c often doesn't like optimization, and it's
-# not time-critical anyway.
-# Set SPECIALCFLAGS to -q nodirect_code on Encore.
-
-all: gc.a gctest
-
-BSD-pkg-all: bsd-libgc.a
-
-bsd-libgc.a:
-	$(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
-	mv gc.a bsd-libgc.a
-
-BSD-pkg-install: BSD-pkg-all
-	${CP} bsd-libgc.a libgc.a
-	${INSTALL_DATA} libgc.a ${PREFIX}/lib
-	${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
-
-pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
-include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
-mach_dep.o $(SRCS)
-	$(MAKE) -f PCR-Makefile depend
-	$(MAKE) -f PCR-Makefile
-
-$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
-    $(srcdir)/include/private/gc_priv.h \
-    $(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
-    $(srcdir)/include/gc.h \
-    $(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
-    Makefile
-# The dependency on Makefile is needed.  Changing
-# options such as -DSILENT affects the size of GC_arrays,
-# invalidating all .o files that rely on gc_priv.h
-
-mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
-
-specific.o linux_threads.o: $(srcdir)/include/private/specific.h
-
-solaris_threads.o solaris_pthreads.o: $(srcdir)/include/private/solaris_threads.h
-
-dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
-
-tests/test.o: tests $(srcdir)/tests/test.c
-	$(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
-	mv test.o tests/test.o
-
-tests:
-	mkdir tests
-
-base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
-	echo > base_lib
-	rm -f dont_ar_1
-	./if_mach SPARC SUNOS5 touch dont_ar_1
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
-	./if_mach M68K AMIGA touch dont_ar_1
-	./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
-	./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
-	./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
-#	ignore ranlib failure; that usually means it doesn't exist, and isn't needed
-
-cords: $(CORD_OBJS) cord/cordtest $(UTILS)
-	rm -f dont_ar_3
-	./if_mach SPARC SUNOS5 touch dont_ar_3
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
-	./if_mach M68K AMIGA touch dont_ar_3
-	./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
-	./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
-	./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
-
-gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
-	$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
-
-test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
-base_lib $(UTILS)
-	rm -f test_cpp
-	./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
-	./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
-
-c++-t: c++
-	./test_cpp 1
-
-c++-nt: c++
-	@echo "Use ./test_cpp 1 to test the leak library"
-
-c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
-	rm -f dont_ar_4
-	./if_mach SPARC SUNOS5 touch dont_ar_4
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
-	./if_mach M68K AMIGA touch dont_ar_4
-	./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
-	./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
-	./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
-	./test_cpp 1
-	echo > c++
-
-dyn_load_sunos53.o: dyn_load.c
-	$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
-
-# SunOS5 shared library version of the collector
-sunos5gc.so: $(OBJS) dyn_load_sunos53.o
-	$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
-	ln sunos5gc.so libgc.so
-
-# Alpha/OSF shared library version of the collector
-libalphagc.so: $(OBJS)
-	ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
-	ln libalphagc.so libgc.so
-
-# IRIX shared library version of the collector
-libirixgc.so: $(OBJS) dyn_load.o
-	ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
-	ln libirixgc.so libgc.so
-
-# Linux shared library version of the collector
-liblinuxgc.so: $(OBJS) dyn_load.o
-	gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
-	ln liblinuxgc.so libgc.so
-
-# Alternative Linux rule.  This is preferable, but is likely to break the
-# Makefile for some non-linux platforms.
-# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
-#
-#.SUFFIXES: .lo $(SUFFIXES)
-#
-#.c.lo:
-#	$(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
-#
-# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
-# 	gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
-#	touch liblinuxgc.so
-
-mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.S \
-	    $(srcdir)/mips_ultrix_mach_dep.s \
-            $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s \
-	    $(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \
-	    $(srcdir)/ia64_save_regs_in_stack.s \
-	    $(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)
-	rm -f mach_dep.o
-	./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.S
-	./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
-	./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
-	./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s
-	./if_mach ALPHA "" $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S
-	./if_mach SPARC SUNOS5 $(CC) -c -o mach_dep.o $(srcdir)/sparc_mach_dep.S
-	./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
-	./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
-	./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s
-	./if_mach IA64 "" as $(AS_ABI_FLAG) -o ia64_save_regs_in_stack.o $(srcdir)/ia64_save_regs_in_stack.s
-	./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-	./if_mach IA64 "" ld -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
-	./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-
-mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
-	rm -f mark_rts.o
-	-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
-	./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
-#	Work-around for DEC optimizer tail recursion elimination bug.
-#  The ALPHA-specific line should be removed if gcc is used.
-
-alloc.o: version.h
-
-cord:
-	mkdir cord
-
-cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
-	mv cordbscs.o cord/cordbscs.o
-#  not all compilers understand -o filename
-
-cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
-	mv cordxtra.o cord/cordxtra.o
-
-cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
-	mv cordprnt.o cord/cordprnt.o
-
-cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
-	rm -f cord/cordtest
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
-	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
-	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
-	./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
-
-cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
-	rm -f cord/de
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
-	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
-	./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
-	./if_mach POWERPC MACOSX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
-	./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
-	./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
-	./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
-	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
-	./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
-
-if_mach: $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
-	$(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/if_mach.c
-
-threadlibs: $(srcdir)/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
-	$(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/threadlibs.c
-
-if_not_there: $(srcdir)/if_not_there.c
-	$(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/if_not_there.c
-
-clean: 
-	rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
-	      setjmp_test  mon.out gmon.out a.out core if_not_there if_mach \
-	      threadlibs $(CORD_OBJS) cord/cordtest cord/de
-	-rm -f *~
-
-gctest: tests/test.o gc.a $(UTILS)
-	rm -f gctest
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest  tests/test.o gc.a -lucb
-	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest  tests/test.o gc.a -ldld `./threadlibs`
-	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest  tests/test.o gc.a `./threadlibs`
-	./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
-
-# If an optimized setjmp_test generates a segmentation fault,
-# odds are your compiler is broken.  Gctest may still work.
-# Try compiling setjmp_t.c unoptimized.
-setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h $(UTILS)
-	$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
-
-test:  KandRtest cord/cordtest
-	cord/cordtest
-
-# Those tests that work even with a K&R C compiler:
-KandRtest: setjmp_test gctest
-	./setjmp_test
-	./gctest
-
-add_gc_prefix: $(srcdir)/add_gc_prefix.c $(srcdir)/version.h
-	$(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c
-
-gcname: $(srcdir)/gcname.c $(srcdir)/version.h
-	$(CC) -o gcname $(srcdir)/gcname.c
-
-gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
-	cp Makefile Makefile.old
-	cp Makefile.direct Makefile
-	rm -f `./gcname`
-	ln -s . `./gcname`
-	./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) > /tmp/gc.tar-files
-	tar cvfh gc.tar `cat /tmp/gc.tar-files`
-	cp gc.tar `./gcname`.tar
-	gzip `./gcname`.tar
-	rm `./gcname`
-
-pc_gc.tar: $(SRCS) $(OTHER_FILES)
-	tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
-
-floppy: pc_gc.tar
-	-mmd a:/cord
-	-mmd a:/cord/private
-	-mmd a:/include
-	-mmd a:/include/private
-	mkdir /tmp/pc_gc
-	cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
-	-mcopy -tmn /tmp/pc_gc/* a:
-	-mcopy -tmn /tmp/pc_gc/cord/* a:/cord
-	-mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
-	-mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
-	-mcopy -tmn /tmp/pc_gc/include/* a:/include
-	-mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
-	rm -r /tmp/pc_gc
-
-gc.tar.Z: gc.tar
-	compress gc.tar
-
-gc.tar.gz: gc.tar
-	gzip gc.tar
-
-lint: $(CSRCS) tests/test.c
-	lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
-
-# BTL: added to test shared library version of collector.
-# Currently works only under SunOS5.  Requires GC_INIT call from statically
-# loaded client code.
-ABSDIR = `pwd`
-gctest_dyn_link: tests/test.o libgc.so
-	$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
-
-gctest_irix_dyn_link: tests/test.o libirixgc.so
-	$(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
-
-# The following appear to be dead, especially since libgc_globals.h
-# is apparently lost.
-test_dll.o: tests/test.c libgc_globals.h
-	$(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
-
-test_dll: test_dll.o libgc_dll.a libgc.dll
-	$(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
-
-SYM_PREFIX-libgc=GC
-
-# Uncomment the following line to build a GNU win32 DLL
-# include Makefile.DLLs
-
-reserved_namespace: $(SRCS)
-	for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
-		sed s/GC_/_GC_/g < $$file > tmp; \
-		cp tmp $$file; \
-		done
-
-user_namespace: $(SRCS)
-	for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
-		sed s/_GC_/GC_/g < $$file > tmp; \
-		cp tmp $$file; \
-		done
diff --git a/gc/Makefile.DLLs b/gc/Makefile.DLLs
deleted file mode 100644
index 011f49d..0000000
--- a/gc/Makefile.DLLs
+++ /dev/null
@@ -1,107 +0,0 @@
-#-----------------------------------------------------------------------------#
-
-# Makefile.DLLs, version 0.4.
-
-# Contributed by Fergus Henderson.
-
-# This Makefile contains rules for creating DLLs on Windows using gnu-win32.
-
-#-----------------------------------------------------------------------------#
-
-# This rule creates a `.def' file, which lists the symbols that are exported
-# from the DLL.  We use `nm' to get a list of all the exported text (`T')
-# symbols and data symbols -- including uninitialized data (`B'),
-# initialized data (`D'), read-only data (`R'), and common blocks (`C').
-%.def: %.a
-	echo EXPORTS > $@
-	nm $< | grep '^........ [BCDRT] _' | sed 's/[^_]*_//' >> $@
-
-# We need to use macros to access global data:
-# the user of the DLL must refer to `foo' as `(*__imp_foo)'.
-# This rule creates a `_globals.h' file, which contains macros
-# for doing this.
-
-SYM_PREFIX = $(firstword $(SYM_PREFIX-$*) $*)
-DLL_MACRO = $(SYM_PREFIX)_USE_DLL
-IMP_MACRO = $(SYM_PREFIX)_IMP
-GLOBAL_MACRO = $(SYM_PREFIX)_GLOBAL
-
-%_globals.h: %.a
-	echo "/* automatically generated by Makefile.DLLs */"	> $@
-	echo "#if defined(__GNUC__) && defined(_WIN32) \\"	>> $@
-	echo "	&& defined($(DLL_MACRO))"			>> $@
-	echo "#  define $(IMP_MACRO)(name)	__imp_##name" 	>> $@
-	echo "#  define $(GLOBAL_MACRO)(name)	(*$(IMP_MACRO)(name))" >> $@
-	echo "#else"						>> $@
-	echo "#  define $(GLOBAL_MACRO)(name)	name"		>> $@
-	echo "#endif"						>> $@
-	echo ""							>> $@
-	for sym in `nm $< | grep '^........ [BCDR] _' | sed 's/[^_]*_//'`; do \
-		echo "#define $$sym	$(GLOBAL_MACRO)($$sym)"	>> $@; \
-	done
-
-# This rule creates the export object file (`foo.exp') which contains the
-# jump table array; this export object file becomes part of the DLL. 
-# This rule also creates the import library (`foo_dll.a') which contains small
-# stubs for all the functions exported by the DLL which jump to them via the
-# jump table.  Executables that will use the DLL must be linked against this
-# stub library.
-%.exp %_dll.a : %.def
-	dlltool $(DLLTOOLFLAGS) $(DLLTOOLFLAGS-$*)		\
-		--def $<					\
-		--dllname $*.dll				\
-		--output-exp $*.exp				\
-		--output-lib $*_dll.a
-
-# The `sed' commands below are to convert DOS-style `C:\foo\bar'
-# pathnames into Unix-style `//c/foo/bar' pathnames.
-CYGWIN32_LIBS = $(shell echo					\
-	-L`dirname \`gcc -print-file-name=libgcc.a |		\
-	sed -e 's@^\\\\([A-Za-z]\\\\):@//\\\\1@g' -e 's@\\\\\\\\@/@g' \` ` \
-	-L`dirname \`gcc -print-file-name=libcygwin.a |	\
-	sed -e 's@^\\\\([A-Za-z]\\\\):@//\\\\1@g' -e 's@\\\\\\\\@/@g' \` ` \
-	-L`dirname \`gcc -print-file-name=libkernel32.a | \
-	sed -e 's@^\\\\([A-Za-z]\\\\):@//\\\\1@g' -e 's@\\\\\\\\@/@g' \` ` \
-	-lgcc -lcygwin -lkernel32 -lgcc)
-
-RELOCATABLE=yes
-
-ifeq "$(strip $(RELOCATABLE))" "yes"
-
-# to create relocatable DLLs, we need to do two passes
-%.dll: %.exp %.a dll_fixup.o dll_init.o
-	$(LD) $(LDFLAGS) $(LDFLAGS-$*) --dll -o $*.base			\
-		-e _dll_entry@12 dll_init.o				\
-		dll_fixup.o $*.exp $*.a					\
-		$(LDLIBS) $(LDLIBS-$*)					\
-		$(CYGWIN32_LIBS)
-	$(LD) $(LDFLAGS) $(LDFLAGS-$*) --dll --base-file $*.base -o $@	\
-		-e _dll_entry@12 dll_init.o				\
-		dll_fixup.o $*.exp $*.a					\
-		$(LDLIBS) $(LDLIBS-$*)					\
-		$(CYGWIN32_LIBS)
-	rm -f $*.base
-else
-
-%.dll: %.exp %.a dll_fixup.o dll_init.o
-	$(LD) $(LDFLAGS) $(LDFLAGS-$*) --dll -o $@			\
-		-e _dll_entry@12 dll_init.o				\
-		dll_fixup.o $*.exp $*.a					\
-		$(LDLIBS) $(LDLIBS-$*)					\
-		$(CYGWIN32_LIBS)
-
-endif
-
-# This black magic piece of assembler needs to be linked in in order to
-# properly terminate the list of imported DLLs.
-dll_fixup.s:
-	echo '.section .idata$$3' 	> dll_fixup.s
-	echo '.long 0,0,0,0, 0,0,0,0'	>> dll_fixup.s
-
-# This bit is necessary to provide an initialization function for the DLL.
-dll_init.c:
-	echo '__attribute__((stdcall))' > dll_init.c
-	echo 'int dll_entry(int handle, int reason, void *ptr)' >> dll_init.c
-	echo '{return 1; }' >> dll_init.c
-
-dont_throw_away: dll_fixup.o dll_init.o
diff --git a/gc/Makefile.am b/gc/Makefile.am
deleted file mode 100644
index 2c8e287..0000000
--- a/gc/Makefile.am
+++ /dev/null
@@ -1,120 +0,0 @@
-# Copyright (c) 1999-2001 by Red Hat, Inc. All rights reserved.
-# 
-# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
-# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
-# 
-# Permission is hereby granted to use or copy this program
-# for any purpose,  provided the above notices are retained on all copies.
-# Permission to modify the code and to distribute modified code is granted,
-# provided the above notices are retained, and a notice that the code was
-# modified is included with the above copyright notice.
-#
-# Original author: Tom Tromey
-# Severely truncated by Hans-J. Boehm
-
-## Process this file with automake to produce Makefile.in.
-
-## FIXME: `make dist' in this directory will not currently work.  Many
-## files that should be in the distribution are not mentioned in this
-## Makefile.am.
-
-AUTOMAKE_OPTIONS = foreign
-
-lib_LTLIBRARIES = libgc.la
-
-libgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \
-dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c irix_threads.c \
-linux_threads.c malloc.c mallocx.c mark.c mark_rts.c misc.c new_hblk.c \
-obj_map.c os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \
-solaris_pthreads.c solaris_threads.c specific.c stubborn.c typd_mlc.c \
-backgraph.c win32_threads.c
-
-# Include THREADLIBS here to ensure that the correct versions of
-# linuxthread semaphore functions get linked:
-libgc_la_LIBADD = @addobjs@ $(THREADLIBS)
-libgc_la_DEPENDENCIES = @addobjs@
-libgc_la_LDFLAGS = -version-info 1:1:0
-
-EXTRA_libgc_la_SOURCES = alpha_mach_dep.s \
-mips_sgi_mach_dep.S mips_ultrix_mach_dep.s powerpc_macosx_mach_dep.s \
-rs6000_mach_dep.s sparc_mach_dep.S sparc_netbsd_mach_dep.s \
-sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s
-
-AM_CXXFLAGS = @GC_CFLAGS@
-AM_CFLAGS = @GC_CFLAGS@
-
-check_PROGRAMS = gctest
-# The following hack produces a warning from automake, but we need it in order 
-# to build a file from a subdirectory. FIXME.
-test.o:	$(srcdir)/tests/test.c
-	$(COMPILE) -c $(srcdir)/tests/test.c
-# 	Using $< in the above seems to fail with the HP/UX on Itanium make.
-
-# gctest_OBJECTS = test.o
-gctest_SOURCES = 
-gctest_LDADD = test.o ./libgc.la $(THREADLIBS) $(EXTRA_TEST_LIBS)
-TESTS_ENVIRONMENT = LD_LIBRARY_PATH=../../$(MULTIBUILDTOP)gcc
-TESTS = gctest
-
-## FIXME: relies on internal code generated by automake.
-all_objs = @addobjs@ $(libgc_la_OBJECTS)
-$(all_objs) : include/private/gcconfig.h include/private/gc_priv.h \
-include/private/gc_hdrs.h include/gc.h include/gc_gcj.h include/gc_mark.h
-
-## FIXME: we shouldn't have to do this, but automake forces us to.
-.s.lo:
-## We use -Wp,-P to strip #line directives.  Irix `as' chokes on
-## these.
-	$(LTCOMPILE) -Wp,-P -x assembler-with-cpp -c $<
-
-## We have our own definition of LTCOMPILE because we want to use our
-## CFLAGS, not those passed in from the top level make.
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(MY_CFLAGS) $(GC_CFLAGS) 
-LINK = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(MY_CFLAGS) $(LDFLAGS) -o $@
-
-# Work around what appears to be a GNU make bug handling MAKEFLAGS
-# values defined in terms of make variables, as is the case for CC and
-# friends when we are called from the top level Makefile.
-AM_MAKEFLAGS = \
-	"AR_FLAGS=$(AR_FLAGS)" \
-	"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
-	"CFLAGS=$(CFLAGS)" \
-	"CXXFLAGS=$(CXXFLAGS)" \
-	"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
-	"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
-	"INSTALL=$(INSTALL)" \
-	"INSTALL_DATA=$(INSTALL_DATA)" \
-	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-	"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
-	"LDFLAGS=$(LDFLAGS)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
-	"MAKE=$(MAKE)" \
-	"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
-	"PICFLAG=$(PICFLAG)" \
-	"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
-	"SHELL=$(SHELL)" \
-	"EXPECT=$(EXPECT)" \
-	"RUNTEST=$(RUNTEST)" \
-	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
-	"exec_prefix=$(exec_prefix)" \
-	"infodir=$(infodir)" \
-	"libdir=$(libdir)" \
-	"prefix=$(prefix)" \
-	"tooldir=$(tooldir)" \
-	"AR=$(AR)" \
-	"AS=$(AS)" \
-	"CC=$(CC)" \
-	"CXX=$(CXX)" \
-	"LD=$(LD)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"NM=$(NM)" \
-	"PICFLAG=$(PICFLAG)" \
-	"RANLIB=$(RANLIB)" \
-	"DESTDIR=$(DESTDIR)"
-
-CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host
-
-MAKEOVERRIDES=
diff --git a/gc/Makefile.direct b/gc/Makefile.direct
deleted file mode 100644
index 61a0b64..0000000
--- a/gc/Makefile.direct
+++ /dev/null
@@ -1,632 +0,0 @@
-# This is the original manually generated Makefile.  It may still be used
-# to build the collector.
-#
-# Primary targets:
-# gc.a - builds basic library
-# c++ - adds C++ interface to library
-# cords - adds cords (heavyweight strings) to library
-# test - prints porting information, then builds basic version of gc.a,
-#      	 and runs some tests of collector and cords.  Does not add cords or
-#	 c++ interface to gc.a
-# cord/de - builds dumb editor based on cords.
-ABI_FLAG= 
-# ABI_FLAG should be the cc flag that specifies the ABI.  On most
-# platforms this will be the empty string.  Possible values:
-# +DD64 for 64-bit executable on HP/UX.
-# -n32, -n64, -o32 for SGI/MIPS ABIs.
-
-AS_ABI_FLAG=$(ABI_FLAG)
-# ABI flag for assembler.  On HP/UX this is +A64 for 64 bit
-# executables.
-
-CC=cc $(ABI_FLAG)
-CXX=g++ $(ABI_FLAG)
-AS=as $(AS_ABI_FLAG)
-#  The above doesn't work with gas, which doesn't run cpp.
-#  Define AS as `gcc -c -x assembler-with-cpp' instead.
-
-# Redefining srcdir allows object code for the nonPCR version of the collector
-# to be generated in different directories.
-srcdir= .
-VPATH= $(srcdir)
-
-CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EXECUTE_PERMISSION -DSILENT -DALL_INTERIOR_POINTERS
-
-# To build the parallel collector on Linux, add to the above:
-# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
-# To build the parallel collector n a static library on HP/UX, add to the above:
-# -DGC_HPUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC -DUSE_HPUX_TLS -D_POSIX_C_SOURCE=199506L
-
-# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
-# part of the build process, i.e. on the build machine.  These will usually
-# be the same as CC and CFLAGS, except in a cross-compilation environment.
-# Note that HOSTCFLAGS should include any -D flags that affect thread support.
-HOSTCC=$(CC)
-HOSTCFLAGS=$(CFLAGS)
-
-# For dynamic library builds, it may be necessary to add flags to generate
-# PIC code, e.g. -fPIC on Linux.
-
-# Setjmp_test may yield overly optimistic results when compiled
-# without optimization.
-
-# These define arguments influence the collector configuration:
-# -DSILENT disables statistics printing, and improves performance.
-# -DFIND_LEAK causes GC_find_leak to be initially set.
-#   This causes the collector to assume that all inaccessible
-#   objects should have been explicitly deallocated, and reports exceptions.
-#   Finalization and the test program are not usable in this mode.
-# -DGC_SOLARIS_THREADS enables support for Solaris (thr_) threads.
-#   (Clients should also define GC_SOLARIS_THREADS and then include
-#   gc.h before performing thr_ or dl* or GC_ operations.)
-#   Must also define -D_REENTRANT.
-# -DGC_SOLARIS_PTHREADS enables support for Solaris pthreads.
-#   (Internally this define GC_SOLARIS_THREADS as well.)
-# -DGC_IRIX_THREADS enables support for Irix pthreads.  See README.irix.
-# -DGC_HPUX_THREADS enables support for HP/UX 11 pthreads.
-#   Also requires -D_REENTRANT or -D_POSIX_C_SOURCE=199506L. See README.hp.
-# -DGC_LINUX_THREADS enables support for Xavier Leroy's Linux threads.
-#   see README.linux.  -D_REENTRANT may also be required.
-# -DGC_OSF1_THREADS enables support for Tru64 pthreads.  Untested.
-# -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads.  Untested.
-#   Appeared to run into some underlying thread problems.
-# -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads.
-#   See README.DGUX386.
-# -DALL_INTERIOR_POINTERS allows all pointers to the interior
-#   of objects to be recognized.  (See gc_priv.h for consequences.)
-#   Alternatively, GC_all_interior_pointers can be set at process
-#   initialization time.
-# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
-#   usually causing it to use less space in such situations.
-#   Incremental collection no longer works in this case.
-# -DLARGE_CONFIG tunes the collector for unusually large heaps.
-#   Necessary for heaps larger than about 500 MB on most machines.
-#   Recommended for heaps larger than about 64 MB.
-# -DDONT_ADD_BYTE_AT_END is meaningful only with -DALL_INTERIOR_POINTERS or
-#   GC_all_interior_pointers = 1.  Normally -DALL_INTERIOR_POINTERS
-#   causes all objects to be padded so that pointers just past the end of
-#   an object can be recognized.  This can be expensive.  (The padding
-#   is normally more than one byte due to alignment constraints.)
-#   -DDONT_ADD_BYTE_AT_END disables the padding.
-# -DNO_SIGNALS does not disable signals during critical parts of
-#   the GC process.  This is no less correct than many malloc 
-#   implementations, and it sometimes has a significant performance
-#   impact.  However, it is dangerous for many not-quite-ANSI C
-#   programs that call things like printf in asynchronous signal handlers.
-#   This is on by default.  Turning it off has not been extensively tested with
-#   compilers that reorder stores.  It should have been.
-# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
-#   have execute permission, i.e. it may be impossible to execute
-#   code from the heap.  Currently this only affects the incremental
-#   collector on UNIX machines.  It may greatly improve its performance,
-#   since this may avoid some expensive cache synchronization.
-# -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
-#   the  new syntax "operator new[]" for allocating and deleting arrays.
-#   See gc_cpp.h for details.  No effect on the C part of the collector.
-#   This is defined implicitly in a few environments.  Must also be defined
-#   by clients that use gc_cpp.h.
-# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be
-#   defined as aliases for X, GC_realloc, and GC_free, respectively.
-#   Calloc and strdup are redefined in terms of the new malloc.  X should
-#   be either GC_malloc or GC_malloc_uncollectable, or
-#   GC_debug_malloc_replacement.  (The latter invokes GC_debug_malloc
-#   with dummy source location information, but still results in
-#   properly remembered call stacks on Linux/X86 and Solaris/SPARC.)
-#   The former is occasionally useful for working around leaks in code
-#   you don't want to (or can't) look at.  It may not work for
-#   existing code, but it often does.  Neither works on all platforms,
-#   since some ports use malloc or calloc to obtain system memory.
-#   (Probably works for UNIX, and win32.)  If you build with DBG_HDRS_ALL,
-#   you should only use GC_debug_malloc_replacement as a malloc
-#   replacement.
-# -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X.
-#   The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,
-#   together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to
-#   generate leak reports with call stacks for both malloc and realloc.
-# -DIGNORE_FREE turns calls to free into a noop.  Only useful with
-#   -DREDIRECT_MALLOC.
-# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
-#   Reduces code size slightly at the expense of debuggability.
-# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
-#   order by specifying a nonstandard finalization mark procedure  (see
-#   finalize.c).  Objects reachable from finalizable objects will be marked
-#   in a sepearte postpass, and hence their memory won't be reclaimed.
-#   Not recommended unless you are implementing a language that specifies
-#   these semantics.  Since 5.0, determines only only the initial value
-#   of GC_java_finalization variable.
-# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
-#   to explicit GC_invoke_finalizers() calls.
-#   In 5.0 this became runtime adjustable, and this only determines the
-#   initial value of GC_finalize_on_demand.
-# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
-#   This is useful if either the vendor malloc implementation is poor,
-#   or if REDIRECT_MALLOC is used.
-# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
-#   sets the heap block size.  Each heap block is devoted to a single size and
-#   kind of object.  For the incremental collector it makes sense to match
-#   the most likely page size.  Otherwise large values result in more
-#   fragmentation, but generally better performance for large heaps.
-# -DUSE_MMAP use MMAP instead of sbrk to get new memory.
-#   Works for Solaris and Irix.
-# -DUSE_MUNMAP causes memory to be returned to the OS under the right
-#   circumstances.  This currently disables VM-based incremental collection.
-#   This is currently experimental, and works only under some Unix,
-#   Linux and Windows versions.
-# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
-#   GC_scratch_alloc() to get stack memory.
-# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
-#   the garbage collector detects a value that looks almost, but not quite,
-#   like a pointer, print both the address containing the value, and the
-#   value of the near-bogus-pointer.  Can be used to identifiy regions of
-#   memory that are likely to contribute misidentified pointers.
-# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
-#   for objects allocated with the debugging allocator.  If all objects
-#   through GC_MALLOC with GC_DEBUG defined, this allows the client
-#   to determine how particular or randomly chosen objects are reachable
-#   for debugging/profiling purposes.  The gc_backptr.h interface is
-#   implemented only if this is defined.
-# -DGC_ASSERTIONS Enable some internal GC assertion checking.  Currently
-#   this facility is only used in a few places.  It is intended primarily
-#   for debugging of the garbage collector itself, but could also
-# -DDBG_HDRS_ALL Make sure that all objects have debug headers.  Increases
-#   the reliability (from 99.9999% to 100%) of some of the debugging
-#   code (especially KEEP_BACK_PTRS).  Makes -DSHORT_DBG_HDRS possible.
-#   Assumes that all client allocation is done through debugging
-#   allocators.
-# -DSHORT_DBG_HDRS Assume that all objects have debug headers.  Shorten
-#   the headers to minimize object size, at the expense of checking for
-#   writes past the end of an object.  This is intended for environments
-#   in which most client code is written in a "safe" language, such as
-#   Scheme or Java.  Assumes that all client allocation is done using
-#   the GC_debug_ functions, or through the macros that expand to these,
-#   or by redirecting malloc to GC_debug_malloc_replacement.
-#   (Also eliminates the field for the requested object size.)
-#   occasionally be useful for debugging of client code.  Slows down the
-#   collector somewhat, but not drastically.
-# -DSAVE_CALL_COUNT=<n> Set the number of call frames saved with objects
-#   allocated through the debugging interface.  Affects the amount of
-#   information generated in leak reports.  Only matters on platforms
-#   on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
-#   and Solaris/SPARC and platforms that provide execinfo.h.
-#   Default is zero.  On X86, client
-#   code should NOT be compiled with -fomit-frame-pointer.
-# -DSAVE_CALL_NARGS=<n> Set the number of functions arguments to be
-#   saved with each call frame.  Default is zero.  Ignored if we
-#   don't know how to retrieve arguments on the platform.
-# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
-#   altered stubborn objects, at substantial performance cost.
-#   Use only for debugging of the incremental collector.
-# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
-#   that include a pointer to a type descriptor in each allocated object).
-#   Building this way requires an ANSI C compiler.
-# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
-#   prefetch instructions.  No effect except on X86 Linux platforms.
-#   Assumes a very recent gcc-compatible compiler and assembler.
-#   (Gas prefetcht0 support was added around May 1999.)
-#   Empirically the code appears to still run correctly on Pentium II
-#   processors, though with no performance benefit.  May not run on other
-#   X86 processors?  In some cases this improves performance by
-#   15% or so.
-# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
-#   prefetch instructions.  Same restrictions as USE_I686_PREFETCH.
-#   Minimally tested.  Didn't appear to be an obvious win on a K6-2/500.
-# -DGC_USE_LD_WRAP in combination with the old flags listed in README.linux
-#   causes the collector some system and pthread calls in a more transparent
-#   fashion than the usual macro-based approach.  Requires GNU ld, and
-#   currently probably works only with Linux.
-# -DTHREAD_LOCAL_ALLOC defines GC_local_malloc(), GC_local_malloc_atomic()
-#   and GC_local_gcj_malloc().  Needed for gc_gcj.h interface.  These allocate
-#   in a way that usually does not involve acquisition of a global lock.
-#   Currently requires -DGC_LINUX_THREADS, but should be easy to port to
-#   other pthreads environments.  Recommended for multiprocessors.
-# -DPARALLEL_MARK allows the marker to run in multiple threads.  Recommended
-#   for multiprocessors.  Currently requires Linux on X86 or IA64, though
-#   support for other Posix platforms should be fairly easy to add,
-#   if the thread implementation is otherwise supported.
-# -DNO_GETENV prevents the collector from looking at environment variables.
-#   These may otherwise alter its configuration, or turn off GC altogether.
-#   I don't know of a reason to disable this, except possibly if the
-#   resulting process runs as a privileged user?
-# -DUSE_GLOBAL_ALLOC.  Win32 only.  Use GlobalAlloc instead of
-#   VirtualAlloc to allocate the heap.  May be needed to work around
-#   a Windows NT/2000 issue.  Incompatible with USE_MUNMAP.
-#   See README.win32 for details.
-# -DMAKE_BACK_GRAPH. Enable GC_PRINT_BACK_HEIGHT environment variable.
-#   See README.environment for details.  Experimental. Limited platform
-#   support.  Implies DBG_HDRS_ALL.  All allocation should be done using
-#   the debug interface.
-# -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus
-#   makes incremental collection easier.  Was enabled by default until 6.0.
-#   Rarely used, to my knowledge.
-# -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed
-#   from a multithreaded parent.  Currently only supported by linux_threads.c.
-#   (Similar code should work on Solaris or Irix, but it hasn't been tried.)
-#
-
-CXXFLAGS= $(CFLAGS) 
-AR= ar
-RANLIB= ranlib
-
-
-OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o backgraph.o
-
-CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c backgraph.c
-
-CORD_SRCS=  cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
-
-CORD_OBJS=  cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
-
-SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s alpha_mach_dep.S \
-    sparc_mach_dep.S include/gc.h include/gc_typed.h \
-    include/private/gc_hdrs.h include/private/gc_priv.h \
-    include/private/gcconfig.h include/private/gc_pmark.h \
-    include/gc_inl.h include/gc_inline.h include/gc_mark.h \
-    threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
-    gcname.c include/weakpointer.h include/private/gc_locks.h \
-    gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
-    include/new_gc_alloc.h include/gc_allocator.h \
-    include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \
-    include/private/solaris_threads.h include/gc_backptr.h \
-    hpux_test_and_clear.s include/gc_gcj.h \
-    include/gc_local_alloc.h include/private/dbg_mlc.h \
-    include/private/specific.h powerpc_macosx_mach_dep.s \
-    include/leak_detector.h include/gc_amiga_redirects.h \
-    include/gc_pthread_redirects.h ia64_save_regs_in_stack.s \
-    $(CORD_SRCS)
-
-DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
-	doc/README.amiga doc/README.cords doc/debugging.html \
-	doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
-	doc/README.sgi doc/README.solaris2 doc/README.uts \
-	doc/README.win32 doc/barrett_diagram doc/README \
-        doc/README.contributors doc/README.changes doc/gc.man \
-	doc/README.environment doc/tree.html doc/gcdescr.html \
-	doc/README.autoconf doc/README.macros doc/README.ews4800 \
-	doc/README.DGUX386 doc/README.arm.cross
-
-TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
-	tests/leak_test.c tests/thread_leak_test.c
-
-GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \
-		 libtool.m4 install-sh configure.host Makefile.in \
-		 ltconfig aclocal.m4 config.sub config.guess \
-		 ltmain.sh mkinstalldirs depcomp missing
-
-OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \
-		 BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \
-		 PCR-Makefile SMakefile.amiga Makefile.DLLs \
-		 digimars.mak Makefile.direct
-#	Makefile and Makefile.direct are copies of each other.
-
-OTHER_FILES= Makefile setjmp_t.c callprocs pc_excludes \
-           MacProjects.sit.hqx MacOS.c \
-           Mac_files/datastart.c Mac_files/dataend.c \
-           Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
-           add_gc_prefix.c gc_cpp.cpp win32_threads.c \
-	   version.h AmigaOS.c \
-	   $(TESTS) $(GNU_BUILD_FILES) $(OTHER_MAKEFILES)
-
-CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
-	$(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
-
-UTILS= if_mach if_not_there threadlibs
-
-# Libraries needed for curses applications.  Only needed for de.
-CURSES= -lcurses -ltermlib
-
-# The following is irrelevant on most systems.  But a few
-# versions of make otherwise fork the shell specified in
-# the SHELL environment variable.
-SHELL= /bin/sh
-
-SPECIALCFLAGS = -I$(srcdir)/include
-# Alternative flags to the C compiler for mach_dep.c.
-# Mach_dep.c often doesn't like optimization, and it's
-# not time-critical anyway.
-# Set SPECIALCFLAGS to -q nodirect_code on Encore.
-
-all: gc.a gctest
-
-BSD-pkg-all: bsd-libgc.a
-
-bsd-libgc.a:
-	$(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
-	mv gc.a bsd-libgc.a
-
-BSD-pkg-install: BSD-pkg-all
-	${CP} bsd-libgc.a libgc.a
-	${INSTALL_DATA} libgc.a ${PREFIX}/lib
-	${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
-
-pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
-include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
-mach_dep.o $(SRCS)
-	$(MAKE) -f PCR-Makefile depend
-	$(MAKE) -f PCR-Makefile
-
-$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
-    $(srcdir)/include/private/gc_priv.h \
-    $(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
-    $(srcdir)/include/gc.h \
-    $(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
-    Makefile
-# The dependency on Makefile is needed.  Changing
-# options such as -DSILENT affects the size of GC_arrays,
-# invalidating all .o files that rely on gc_priv.h
-
-mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
-
-specific.o linux_threads.o: $(srcdir)/include/private/specific.h
-
-solaris_threads.o solaris_pthreads.o: $(srcdir)/include/private/solaris_threads.h
-
-dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
-
-tests/test.o: tests $(srcdir)/tests/test.c
-	$(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
-	mv test.o tests/test.o
-
-tests:
-	mkdir tests
-
-base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
-	echo > base_lib
-	rm -f dont_ar_1
-	./if_mach SPARC SUNOS5 touch dont_ar_1
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
-	./if_mach M68K AMIGA touch dont_ar_1
-	./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
-	./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
-	./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
-#	ignore ranlib failure; that usually means it doesn't exist, and isn't needed
-
-cords: $(CORD_OBJS) cord/cordtest $(UTILS)
-	rm -f dont_ar_3
-	./if_mach SPARC SUNOS5 touch dont_ar_3
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
-	./if_mach M68K AMIGA touch dont_ar_3
-	./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
-	./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
-	./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
-
-gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
-	$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
-
-test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
-base_lib $(UTILS)
-	rm -f test_cpp
-	./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
-	./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
-
-c++-t: c++
-	./test_cpp 1
-
-c++-nt: c++
-	@echo "Use ./test_cpp 1 to test the leak library"
-
-c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
-	rm -f dont_ar_4
-	./if_mach SPARC SUNOS5 touch dont_ar_4
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
-	./if_mach M68K AMIGA touch dont_ar_4
-	./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
-	./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
-	./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
-	./test_cpp 1
-	echo > c++
-
-dyn_load_sunos53.o: dyn_load.c
-	$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
-
-# SunOS5 shared library version of the collector
-sunos5gc.so: $(OBJS) dyn_load_sunos53.o
-	$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
-	ln sunos5gc.so libgc.so
-
-# Alpha/OSF shared library version of the collector
-libalphagc.so: $(OBJS)
-	ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
-	ln libalphagc.so libgc.so
-
-# IRIX shared library version of the collector
-libirixgc.so: $(OBJS) dyn_load.o
-	ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
-	ln libirixgc.so libgc.so
-
-# Linux shared library version of the collector
-liblinuxgc.so: $(OBJS) dyn_load.o
-	gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
-	ln liblinuxgc.so libgc.so
-
-# Alternative Linux rule.  This is preferable, but is likely to break the
-# Makefile for some non-linux platforms.
-# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
-#
-#.SUFFIXES: .lo $(SUFFIXES)
-#
-#.c.lo:
-#	$(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
-#
-# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
-# 	gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
-#	touch liblinuxgc.so
-
-mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.S \
-	    $(srcdir)/mips_ultrix_mach_dep.s \
-            $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s \
-	    $(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \
-	    $(srcdir)/ia64_save_regs_in_stack.s \
-	    $(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)
-	rm -f mach_dep.o
-	./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.S
-	./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
-	./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
-	./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s
-	./if_mach ALPHA "" $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S
-	./if_mach SPARC SUNOS5 $(CC) -c -o mach_dep.o $(srcdir)/sparc_mach_dep.S
-	./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
-	./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
-	./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s
-	./if_mach IA64 "" as $(AS_ABI_FLAG) -o ia64_save_regs_in_stack.o $(srcdir)/ia64_save_regs_in_stack.s
-	./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-	./if_mach IA64 "" ld -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
-	./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-
-mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
-	rm -f mark_rts.o
-	-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
-	./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
-#	Work-around for DEC optimizer tail recursion elimination bug.
-#  The ALPHA-specific line should be removed if gcc is used.
-
-alloc.o: version.h
-
-cord:
-	mkdir cord
-
-cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
-	mv cordbscs.o cord/cordbscs.o
-#  not all compilers understand -o filename
-
-cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
-	mv cordxtra.o cord/cordxtra.o
-
-cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
-	mv cordprnt.o cord/cordprnt.o
-
-cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
-	rm -f cord/cordtest
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
-	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
-	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
-	./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
-
-cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
-	rm -f cord/de
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
-	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
-	./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
-	./if_mach POWERPC MACOSX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
-	./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
-	./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
-	./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
-	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
-	./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
-
-if_mach: $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
-	$(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/if_mach.c
-
-threadlibs: $(srcdir)/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
-	$(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/threadlibs.c
-
-if_not_there: $(srcdir)/if_not_there.c
-	$(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/if_not_there.c
-
-clean: 
-	rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
-	      setjmp_test  mon.out gmon.out a.out core if_not_there if_mach \
-	      threadlibs $(CORD_OBJS) cord/cordtest cord/de
-	-rm -f *~
-
-gctest: tests/test.o gc.a $(UTILS)
-	rm -f gctest
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest  tests/test.o gc.a -lucb
-	./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest  tests/test.o gc.a -ldld `./threadlibs`
-	./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest  tests/test.o gc.a `./threadlibs`
-	./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
-
-# If an optimized setjmp_test generates a segmentation fault,
-# odds are your compiler is broken.  Gctest may still work.
-# Try compiling setjmp_t.c unoptimized.
-setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h $(UTILS)
-	$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
-
-test:  KandRtest cord/cordtest
-	cord/cordtest
-
-# Those tests that work even with a K&R C compiler:
-KandRtest: setjmp_test gctest
-	./setjmp_test
-	./gctest
-
-add_gc_prefix: $(srcdir)/add_gc_prefix.c $(srcdir)/version.h
-	$(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c
-
-gcname: $(srcdir)/gcname.c $(srcdir)/version.h
-	$(CC) -o gcname $(srcdir)/gcname.c
-
-gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix gcname
-	cp Makefile Makefile.old
-	cp Makefile.direct Makefile
-	rm -f `./gcname`
-	ln -s . `./gcname`
-	./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) > /tmp/gc.tar-files
-	tar cvfh gc.tar `cat /tmp/gc.tar-files`
-	cp gc.tar `./gcname`.tar
-	gzip `./gcname`.tar
-	rm `./gcname`
-
-pc_gc.tar: $(SRCS) $(OTHER_FILES)
-	tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
-
-floppy: pc_gc.tar
-	-mmd a:/cord
-	-mmd a:/cord/private
-	-mmd a:/include
-	-mmd a:/include/private
-	mkdir /tmp/pc_gc
-	cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
-	-mcopy -tmn /tmp/pc_gc/* a:
-	-mcopy -tmn /tmp/pc_gc/cord/* a:/cord
-	-mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
-	-mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
-	-mcopy -tmn /tmp/pc_gc/include/* a:/include
-	-mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
-	rm -r /tmp/pc_gc
-
-gc.tar.Z: gc.tar
-	compress gc.tar
-
-gc.tar.gz: gc.tar
-	gzip gc.tar
-
-lint: $(CSRCS) tests/test.c
-	lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
-
-# BTL: added to test shared library version of collector.
-# Currently works only under SunOS5.  Requires GC_INIT call from statically
-# loaded client code.
-ABSDIR = `pwd`
-gctest_dyn_link: tests/test.o libgc.so
-	$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
-
-gctest_irix_dyn_link: tests/test.o libirixgc.so
-	$(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
-
-# The following appear to be dead, especially since libgc_globals.h
-# is apparently lost.
-test_dll.o: tests/test.c libgc_globals.h
-	$(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
-
-test_dll: test_dll.o libgc_dll.a libgc.dll
-	$(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
-
-SYM_PREFIX-libgc=GC
-
-# Uncomment the following line to build a GNU win32 DLL
-# include Makefile.DLLs
-
-reserved_namespace: $(SRCS)
-	for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
-		sed s/GC_/_GC_/g < $$file > tmp; \
-		cp tmp $$file; \
-		done
-
-user_namespace: $(SRCS)
-	for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
-		sed s/_GC_/GC_/g < $$file > tmp; \
-		cp tmp $$file; \
-		done
diff --git a/gc/Makefile.dj b/gc/Makefile.dj
deleted file mode 100644
index 146c83b..0000000
--- a/gc/Makefile.dj
+++ /dev/null
@@ -1,430 +0,0 @@
-# This Makefile is intended only for DJGPP use.
-# It is mainly a copy of the main Makefile, but tends to get out of sync
-# with it.  A merge would probably be appropriate.
-
-# Primary targets:
-# gc.a - builds basic library
-# libgc.a - builds library for use with g++ "-fgc-keyword" extension
-#	    -fgc-keyword was never really available.  Historical
-#	    interest only.
-# c++ - adds C++ interface to library
-# cords - adds cords (heavyweight strings) to library
-# test - prints porting information, then builds basic version of gc.a,
-#      	 and runs some tests of collector and cords.  Does not add cords or
-#	 c++ interface to gc.a
-# cord/de$(EXE_SUFFIX) - builds dumb editor based on cords.
-ABI_FLAG=
-CC=gcc $(ABI_FLAG)
-CXX=gxx $(ABI_FLAG)
-AS=gcc -c -x assembler-with-cpp $(ABI_FLAG)
-#  The above doesn't work with gas, which doesn't run cpp.
-#  Define AS as `gcc -c -x assembler-with-cpp' instead.
-#  Under Irix 6, you will have to specify the ABI (-o32, -n32, or -64)
-#  if you use something other than the default ABI on your machine.
-
-# special defines for DJGPP
-CXXLD=gxx $(ABI_FLAG)
-EXE_SUFFIX=.exe
-
-srcdir= .
-VPATH= $(srcdir)
-
-CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DALL_INTERIOR_POINTERS -DNO_EXECUTE_PERMISSION -DSILENT
-
-# Setjmp_test may yield overly optimistic results when compiled
-# without optimization.
-# -DSILENT disables statistics printing, and improves performance.
-# -DFIND_LEAK causes GC_find_leak to be initially set.
-#   This causes the collector to assume that all inaccessible
-#   objects should have been explicitly deallocated, and reports exceptions.
-#   Finalization and the test program are not usable in this mode.
-# -DALL_INTERIOR_POINTERS allows all pointers to the interior
-#   of objects to be recognized.  (See gc_priv.h for consequences.)
-# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
-#   usually causing it to use less space in such situations.
-#   Incremental collection no longer works in this case.
-# -DLARGE_CONFIG tunes the collector for unusually large heaps.
-#   Necessary for heaps larger than about 500 MB on most machines.
-#   Recommended for heaps larger than about 64 MB.
-# -DDONT_ADD_BYTE_AT_END is meaningful only with
-#   -DALL_INTERIOR_POINTERS.  Normally -DALL_INTERIOR_POINTERS
-#   causes all objects to be padded so that pointers just past the end of
-#   an object can be recognized.  This can be expensive.  (The padding
-#   is normally more than one byte due to alignment constraints.)
-#   -DDONT_ADD_BYTE_AT_END disables the padding.
-# -DNO_SIGNALS does not disable signals during critical parts of
-#   the GC process.  This is no less correct than many malloc 
-#   implementations, and it sometimes has a significant performance
-#   impact.  However, it is dangerous for many not-quite-ANSI C
-#   programs that call things like printf in asynchronous signal handlers.
-#   This is on by default.  Turning it off has not been extensively tested with
-#   compilers that reorder stores.  It should have been.
-# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
-#   have execute permission, i.e. it may be impossible to execute
-#   code from the heap.  Currently this only affects the incremental
-#   collector on UNIX machines.  It may greatly improve its performance,
-#   since this may avoid some expensive cache synchronization.
-# -DGC_NO_OPERATOR_NEW_ARRAY declares that the C++ compiler does not support
-#   the  new syntax "operator new[]" for allocating and deleting arrays.
-#   See gc_cpp.h for details.  No effect on the C part of the collector.
-#   This is defined implicitly in a few environments.  Must also be defined
-#   by clients that use gc_cpp.h.
-# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined
-#   as aliases for X, GC_realloc, and GC_free, respectively.
-#   Calloc is redefined in terms of the new malloc.  X should
-#   be either GC_malloc or GC_malloc_uncollectable.
-#   The former is occasionally useful for working around leaks in code
-#   you don't want to (or can't) look at.  It may not work for
-#   existing code, but it often does.  Neither works on all platforms,
-#   since some ports use malloc or calloc to obtain system memory.
-#   (Probably works for UNIX, and win32.)
-# -DIGNORE_FREE turns calls to free into a noop.  Only useful with
-#   -DREDIRECT_MALLOC.
-# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
-#   Reduces code size slightly at the expense of debuggability.
-# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
-#   order by specifying a nonstandard finalization mark procedure  (see
-#   finalize.c).  Objects reachable from finalizable objects will be marked
-#   in a sepearte postpass, and hence their memory won't be reclaimed.
-#   Not recommended unless you are implementing a language that specifies
-#   these semantics.  Since 5.0, determines only only the initial value
-#   of GC_java_finalization variable.
-# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
-#   to explicit GC_invoke_finalizers() calls.
-#   In 5.0 this became runtime adjustable, and this only determines the
-#   initial value of GC_finalize_on_demand.
-# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
-#   This is useful if either the vendor malloc implementation is poor,
-#   or if REDIRECT_MALLOC is used.
-# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
-#   sets the heap block size.  Each heap block is devoted to a single size and
-#   kind of object.  For the incremental collector it makes sense to match
-#   the most likely page size.  Otherwise large values result in more
-#   fragmentation, but generally better performance for large heaps.
-# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
-#   the garbage collector detects a value that looks almost, but not quite,
-#   like a pointer, print both the address containing the value, and the
-#   value of the near-bogus-pointer.  Can be used to identifiy regions of
-#   memory that are likely to contribute misidentified pointers.
-# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
-#   for objects allocated with the debugging allocator.  If all objects
-#   through GC_MALLOC with GC_DEBUG defined, this allows the client
-#   to determine how particular or randomly chosen objects are reachable
-#   for debugging/profiling purposes.  The gc_backptr.h interface is
-#   implemented only if this is defined.
-# -DGC_ASSERTIONS Enable some internal GC assertion checking.  Currently
-#   this facility is only used in a few places.  It is intended primarily
-#   for debugging of the garbage collector itself, but could also
-# -DDBG_HDRS_ALL Make sure that all objects have debug headers.  Increases
-#   the reliability (from 99.9999% to 100%) of some of the debugging
-#   code (especially KEEP_BACK_PTRS).  Makes -DSHORT_DBG_HDRS possible.
-#   Assumes that all client allocation is done through debugging
-#   allocators.
-# -DSHORT_DBG_HDRS Assume that all objects have debug headers.  Shorten
-#   the headers to minimize object size, at the expense of checking for
-#   writes past the end of an object.  This is intended for environments
-#   in which most client code is written in a "safe" language, such as
-#   Scheme or Java.  Assumes that all client allocation is done using
-#   the GC_debug_ functions (or through the macros that expand to these.
-#   (Also eliminates the field for the requested object size.)
-#   occasionally be useful for debugging of client code.  Slows down the
-#   collector somewhat, but not drastically.
-# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
-#   altered stubborn objects, at substantial performance cost.
-#   Use only for debugging of the incremental collector.
-# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
-#   that include a pointer to a type descriptor in each allocated object).
-#   Building this way requires an ANSI C compiler.
-# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
-#   prefetch instructions.  No effect except on X86 Linux platforms.
-#   Assumes a very recent gcc-compatible compiler and assembler.
-#   (Gas prefetcht0 support was added around May 1999.)
-#   Empirically the code appears to still run correctly on Pentium II
-#   processors, though with no performance benefit.  May not run on other
-#   X86 processors?  In some cases this improves performance by
-#   15% or so.
-# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
-#   prefetch instructions.  Same restrictions as USE_I686_PREFETCH.
-#   UNTESTED!!
-# -DGC_USE_LD_WRAP in combination with the gld flags listed in README.linux
-#   causes the collector some system and pthread calls in a more transparent
-#   fashion than the usual macro-based approach.  Requires GNU ld, and
-#   currently probably works only with Linux.
-
-
-CXXFLAGS= $(CFLAGS) -DGC_OPERATOR_NEW_ARRAY
-AR= ar
-RANLIB= ranlib
-
-
-OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o hpux_irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o
-
-CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c hpux_irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c
-
-CORD_SRCS=  cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC cord/SCOPTIONS.amiga cord/SMakefile.amiga
-
-CORD_OBJS=  cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
-
-SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s alpha_mach_dep.S \
-    sparc_mach_dep.S include/gc.h include/gc_typed.h \
-    include/private/gc_hdrs.h include/private/gc_priv.h \
-    include/private/gcconfig.h include/private/gc_mark.h \
-    include/gc_inl.h include/gc_inline.h gc.man \
-    threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
-    include/weakpointer.h include/private/gc_locks.h \
-    gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
-    include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \
-    include/private/solaris_threads.h include/gc_backptr.h \
-    hpux_test_and_clear.s include/gc_gcj.h \
-    include/gc_local_alloc.h include/private/dbg_mlc.h \
-    include/private/specific.h powerpc_macosx_mach_dep.s \
-    include/leak_detector.h $(CORD_SRCS)
-
-OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \
-           README test.c test_cpp.cc setjmp_t.c SMakefile.amiga \
-           SCoptions.amiga README.amiga README.win32 cord/README \
-	   README.rs6000 README.QUICK callprocs pc_excludes \
-           barrett_diagram README.OS2 README.Mac MacProjects.sit.hqx \
-           MacOS.c EMX_MAKEFILE README.debugging \
-           Mac_files/datastart.c Mac_files/dataend.c \
-           Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
-           add_gc_prefix.c README.solaris2 README.sgi README.hp README.uts \
-	   win32_threads.c NT_THREADS_MAKEFILE gc.mak README.dj Makefile.dj \
-	   README.alpha README.linux README.MacOSX version.h Makefile.DLLs \
-	   WCC_MAKEFILE nursery.c include/gc_nursery.h include/gc_copy_descr.h
-
-CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
-	$(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
-
-UTILS= if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
-
-# Libraries needed for curses applications.  Only needed for de.
-CURSES= -lcurses -ltermlib
-
-# The following is irrelevant on most systems.  But a few
-# versions of make otherwise fork the shell specified in
-# the SHELL environment variable.
-SHELL= /bin/sh
-
-SPECIALCFLAGS = 
-# Alternative flags to the C compiler for mach_dep.c.
-# Mach_dep.c often doesn't like optimization, and it's
-# not time-critical anyway.
-# Set SPECIALCFLAGS to -q nodirect_code on Encore.
-
-all: gc.a gctest$(EXE_SUFFIX)
-
-$(OBJS) test.o dyn_load.o dyn_load_sunos53.o: \
-    $(srcdir)/include/private/gc_priv.h \
-    $(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
-    $(srcdir)/include/gc.h \
-    $(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
-    Makefile
-# The dependency on Makefile is needed.  Changing
-# options such as -DSILENT affects the size of GC_arrays,
-# invalidating all .o files that rely on gc_priv.h
-
-mark.o typd_mlc.o finalize.o: $(srcdir)/gc_mark.h
-
-base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
-	echo > base_lib
-	rm -f on_sparc_sunos5_1
-	./if_mach SPARC SUNOS5 touch on_sparc_sunos5_1
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
-	./if_not_there on_sparc_sunos5_1 $(AR) ru gc.a $(OBJS) dyn_load.o
-	-./if_not_there on_sparc_sunos5_1 $(RANLIB) gc.a
-#	ignore ranlib failure; that usually means it doesn't exist, and isn't needed
-
-cords: $(CORD_OBJS) cord/cordtest$(EXE_SUFFIX) $(UTILS)
-	rm -f on_sparc_sunos5_3
-	./if_mach SPARC SUNOS5 touch on_sparc_sunos5_3
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
-	./if_not_there on_sparc_sunos5_3 $(AR) ru gc.a $(CORD_OBJS)
-	-./if_not_there on_sparc_sunos5_3 $(RANLIB) gc.a
-
-gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
-	$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
-
-test_cpp$(EXE_SUFFIX): $(srcdir)/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
-base_lib $(UTILS)
-	rm -f test_cpp test_cpp$(EXE_SUFFIX)
-	./if_mach HP_PA "" $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/test_cpp.cc gc_cpp.o gc.a -ldld
-	./if_not_there test_cpp$(EXE_SUFFIX) $(CXXLD) $(CXXFLAGS) -o test_cpp$(EXE_SUFFIX) $(srcdir)/test_cpp.cc gc_cpp.o gc.a
-	rm -f test_cpp
-
-c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp$(EXE_SUFFIX)
-	rm -f on_sparc_sunos5_4
-	./if_mach SPARC SUNOS5 touch on_sparc_sunos5_4
-	./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
-	./if_not_there on_sparc_sunos5_4 $(AR) ru gc.a gc_cpp.o
-	-./if_not_there on_sparc_sunos5_4 $(RANLIB) gc.a
-	./test_cpp$(EXE_SUFFIX) 1
-	echo > c++
-
-dyn_load_sunos53.o: dyn_load.c
-	$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
-
-# SunOS5 shared library version of the collector
-sunos5gc.so: $(OBJS) dyn_load_sunos53.o
-	$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
-	ln sunos5gc.so libgc.so
-
-# Alpha/OSF shared library version of the collector
-libalphagc.so: $(OBJS)
-	ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
-	ln libalphagc.so libgc.so
-
-# IRIX shared library version of the collector
-libirixgc.so: $(OBJS) dyn_load.o
-	ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
-	ln libirixgc.so libgc.so
-
-# Linux shared library version of the collector
-liblinuxgc.so: $(OBJS) dyn_load.o
-	gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o -lo
-	ln liblinuxgc.so libgc.so
-
-mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.S $(srcdir)/mips_ultrix_mach_dep.s \
-            $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s $(UTILS)
-	rm -f mach_dep.o
-	./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.S
-	./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
-	./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
-	./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s
-	./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s
-	./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.S
-	./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.S
-	./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
-	./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-
-mark_rts.o: $(srcdir)/mark_rts.c if_mach if_not_there $(UTILS)
-	rm -f mark_rts.o
-	-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
-	./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
-#	Work-around for DEC optimizer tail recursion elimination bug.
-#  The ALPHA-specific line should be removed if gcc is used.
-
-alloc.o: version.h
-
-cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
-	mv cordbscs.o cord/cordbscs.o
-#  not all compilers understand -o filename
-
-cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
-	mv cordxtra.o cord/cordxtra.o
-
-cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
-	$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
-	mv cordprnt.o cord/cordprnt.o
-
-cord/cordtest$(EXE_SUFFIX): $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS) /tmp
-	rm -f cord/cordtest$(EXE_SUFFIX)
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest$(EXE_SUFFIX) $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
-	./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/cordtest$(EXE_SUFFIX) $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld
-	./if_not_there cord/cordtest$(EXE_SUFFIX) $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
-	rm -f cord/cordtest cordtest
-	-mv cordtest$(EXE_SUFFIX) cord/
-
-/tmp: $(UTILS)
-	./if_not_there /tmp mkdir /tmp
-
-cord/de$(EXE_SUFFIX): $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
-	rm -f cord/de cord/de$(EXE_SUFFIX)
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
-	./if_mach HP_PA "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld
-	./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
-	./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
-	./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
-	./if_not_there cord/de$(EXE_SUFFIX) $(CC) $(CFLAGS) -o cord/de$(EXE_SUFFIX) $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES)
-
-if_mach$(EXE_SUFFIX): $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
-	rm -f if_mach if_mach$(EXE_SUFFIX)
-	$(CC) $(CFLAGS) -o if_mach $(srcdir)/if_mach.c
-
-threadlibs$(EXE_SUFFIX): $(srcdir)/threadlibs.c $(srcdir)include/private/gcconfig.h Makefile
-	rm -f threadlibs threadlibs$(EXE_SUFFIX)
-	$(CC) $(CFLAGS) -o threadlibs $(srcdir)/threadlibs.c
-
-if_not_there$(EXE_SUFFIX): $(srcdir)/if_not_there.c
-	rm -f if_not_there if_not_there$(EXE_SUFFIX)
-	$(CC) $(CFLAGS) -o if_not_there $(srcdir)/if_not_there.c
-
-# Clean removes *.o several times,
-# because as the first one doesn't seem to get them all!
-clean: 
-	rm -f gc.a *.o
-	rm -f *.o
-	rm -f *.o
-	rm -f cord/*.o
-	rm -f gctest gctest_dyn_link test_cpp
-	rm -f setjmp_test  mon.out gmon.out a.out core if_not_there if_mach
-	rm -f threadlibs $(CORD_OBJS) cordtest cord/cordtest de cord/de
-	rm -f gctest$(EXE_SUFFIX) gctest_dyn_link$(EXE_SUFFIX) test_cpp$(EXE_SUFFIX)
-	rm -f setjmp_test$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX) if_mach$(EXE_SUFFIX)
-	rm -f threadlibs$(EXE_SUFFIX) cord/cordtest$(EXE_SUFFIX)
-	-rm -f *~
-
-gctest$(EXE_SUFFIX): test.o gc.a if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
-	rm -f gctest gctest$(EXE_SUFFIX)
-	./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest  test.o gc.a -lucb
-	./if_mach HP_PA "" $(CC) $(CFLAGS) -o gctest  test.o gc.a -ldld
-	./if_not_there gctest$(EXE_SUFFIX) $(CC) $(CFLAGS) -o gctest$(EXE_SUFFIX) test.o gc.a
-	rm -f gctest
-
-# If an optimized setjmp_test generates a segmentation fault,
-# odds are your compiler is broken.  Gctest may still work.
-# Try compiling setjmp_t.c unoptimized.
-setjmp_test$(EXE_SUFFIX): $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h \
-		if_mach$(EXE_SUFFIX) if_not_there$(EXE_SUFFIX)
-	rm -f setjmp_test$(EXE_SUFFIX)
-	$(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
-	rm -f setjmp_test
-
-test:  KandRtest cord/cordtest$(EXE_SUFFIX)
-	./cord/cordtest$(EXE_SUFFIX)
-
-# Those tests that work even with a K&R C compiler:
-KandRtest: setjmp_test$(EXE_SUFFIX) gctest$(EXE_SUFFIX)
-	./setjmp_test$(EXE_SUFFIX)
-	./gctest$(EXE_SUFFIX)
-
-add_gc_prefix$(EXE_SUFFIX): add_gc_prefix.c
-	$(CC) -o add_gc_prefix$(EXE_SUFFIX) $(srcdir)/add_gc_prefix.c
-	rm -f add_gc_prefix
-
-gc.tar: $(SRCS) $(OTHER_FILES) add_gc_prefix
-	./add_gc_prefix$(EXE_SUFFIX) $(SRCS) $(OTHER_FILES) > /tmp/gc.tar-files
-	(cd $(srcdir)/.. ; tar cvfh - `cat /tmp/gc.tar-files`) > gc.tar
-
-pc_gc.tar: $(SRCS) $(OTHER_FILES)
-	tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
-
-gc.tar.Z: gc.tar
-	compress gc.tar
-
-gc.tar.gz: gc.tar
-	gzip gc.tar
-
-lint: $(CSRCS) test.c
-	lint -DLINT $(CSRCS) test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall"
-
-# BTL: added to test shared library version of collector.
-# Currently works only under SunOS5.  Requires GC_INIT call from statically
-# loaded client code.
-ABSDIR = `pwd`
-gctest_dyn_link: test.o libgc.so
-	$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link test.o -lgc -ldl -lthread
-
-test_dll.o: test.c libgc_globals.h
-	$(CC) $(CFLAGS) -DGC_USE_DLL -c test.c -o test_dll.o
-
-test_dll: test_dll.o libgc_dll.a libgc.dll
-	$(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
-
-SYM_PREFIX-libgc=GC
-
-# Uncomment the following line to build a GNU win32 DLL
-# include Makefile.DLLs
-
diff --git a/gc/Makefile.in b/gc/Makefile.in
deleted file mode 100644
index 5701522..0000000
--- a/gc/Makefile.in
+++ /dev/null
@@ -1,673 +0,0 @@
-# Makefile.in generated by automake 1.6.1 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Copyright (c) 1999-2001 by Red Hat, Inc. All rights reserved.
-# 
-# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
-# OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
-# 
-# Permission is hereby granted to use or copy this program
-# for any purpose,  provided the above notices are retained on all copies.
-# Permission to modify the code and to distribute modified code is granted,
-# provided the above notices are retained, and a notice that the code was
-# modified is included with the above copyright notice.
-#
-# Original author: Tom Tromey
-# Severely truncated by Hans-J. Boehm
-SHELL = @SHELL@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = @program_transform_name@
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_alias = @host_alias@
-host_triplet = @host@
-
-EXEEXT = @EXEEXT@
-OBJEXT = @OBJEXT@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-AMTAR = @AMTAR@
-AR = @AR@
-AS = @AS@
-AWK = @AWK@
-CC = @CC@
-CCAS = @CCAS@
-CCASFLAGS = @CCASFLAGS@
-CFLAGS = @CFLAGS@
-CXX = @CXX@
-CXXFLAGS = @CXXFLAGS@
-CXXINCLUDES = @CXXINCLUDES@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-ECHO = @ECHO@
-EXTRA_TEST_LIBS = @EXTRA_TEST_LIBS@
-GC_CFLAGS = @GC_CFLAGS@
-INCLUDES = @INCLUDES@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-MAINT = @MAINT@
-MY_CFLAGS = @MY_CFLAGS@
-OBJDUMP = @OBJDUMP@
-PACKAGE = @PACKAGE@
-RANLIB = @RANLIB@
-STRIP = @STRIP@
-THREADLIBS = @THREADLIBS@
-VERSION = @VERSION@
-addobjs = @addobjs@
-am__include = @am__include@
-am__quote = @am__quote@
-gc_basedir = @gc_basedir@
-install_sh = @install_sh@
-target_all = @target_all@
-
-AUTOMAKE_OPTIONS = foreign
-
-lib_LTLIBRARIES = libgc.la
-
-libgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \
-dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c irix_threads.c \
-linux_threads.c malloc.c mallocx.c mark.c mark_rts.c misc.c new_hblk.c \
-obj_map.c os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \
-solaris_pthreads.c solaris_threads.c specific.c stubborn.c typd_mlc.c \
-backgraph.c win32_threads.c
-
-
-# Include THREADLIBS here to ensure that the correct versions of
-# linuxthread semaphore functions get linked:
-libgc_la_LIBADD = @addobjs@ $(THREADLIBS)
-libgc_la_DEPENDENCIES = @addobjs@
-libgc_la_LDFLAGS = -version-info 1:1:0
-
-EXTRA_libgc_la_SOURCES = alpha_mach_dep.s \
-mips_sgi_mach_dep.S mips_ultrix_mach_dep.s powerpc_macosx_mach_dep.s \
-rs6000_mach_dep.s sparc_mach_dep.S sparc_netbsd_mach_dep.s \
-sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s
-
-
-AM_CXXFLAGS = @GC_CFLAGS@
-AM_CFLAGS = @GC_CFLAGS@
-
-check_PROGRAMS = gctest
-# 	Using $< in the above seems to fail with the HP/UX on Itanium make.
-
-# gctest_OBJECTS = test.o
-gctest_SOURCES = 
-gctest_LDADD = test.o ./libgc.la $(THREADLIBS) $(EXTRA_TEST_LIBS)
-TESTS_ENVIRONMENT = LD_LIBRARY_PATH=../../$(MULTIBUILDTOP)gcc
-TESTS = gctest
-
-all_objs = @addobjs@ $(libgc_la_OBJECTS)
-
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) \
-	$(AM_CFLAGS) $(MY_CFLAGS) $(GC_CFLAGS) 
-
-LINK = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(MY_CFLAGS) $(LDFLAGS) -o $@
-
-# Work around what appears to be a GNU make bug handling MAKEFLAGS
-# values defined in terms of make variables, as is the case for CC and
-# friends when we are called from the top level Makefile.
-AM_MAKEFLAGS = \
-	"AR_FLAGS=$(AR_FLAGS)" \
-	"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
-	"CFLAGS=$(CFLAGS)" \
-	"CXXFLAGS=$(CXXFLAGS)" \
-	"CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
-	"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
-	"INSTALL=$(INSTALL)" \
-	"INSTALL_DATA=$(INSTALL_DATA)" \
-	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
-	"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
-	"LDFLAGS=$(LDFLAGS)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
-	"MAKE=$(MAKE)" \
-	"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
-	"PICFLAG=$(PICFLAG)" \
-	"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
-	"SHELL=$(SHELL)" \
-	"EXPECT=$(EXPECT)" \
-	"RUNTEST=$(RUNTEST)" \
-	"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
-	"exec_prefix=$(exec_prefix)" \
-	"infodir=$(infodir)" \
-	"libdir=$(libdir)" \
-	"prefix=$(prefix)" \
-	"tooldir=$(tooldir)" \
-	"AR=$(AR)" \
-	"AS=$(AS)" \
-	"CC=$(CC)" \
-	"CXX=$(CXX)" \
-	"LD=$(LD)" \
-	"LIBCFLAGS=$(LIBCFLAGS)" \
-	"NM=$(NM)" \
-	"PICFLAG=$(PICFLAG)" \
-	"RANLIB=$(RANLIB)" \
-	"DESTDIR=$(DESTDIR)"
-
-
-CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host
-
-MAKEOVERRIDES = 
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-LTLIBRARIES = $(lib_LTLIBRARIES)
-
-am_libgc_la_OBJECTS = allchblk.lo alloc.lo blacklst.lo checksums.lo \
-	dbg_mlc.lo dyn_load.lo finalize.lo gc_dlopen.lo gcj_mlc.lo \
-	headers.lo irix_threads.lo linux_threads.lo malloc.lo \
-	mallocx.lo mark.lo mark_rts.lo misc.lo new_hblk.lo obj_map.lo \
-	os_dep.lo pcr_interface.lo ptr_chck.lo real_malloc.lo \
-	reclaim.lo solaris_pthreads.lo solaris_threads.lo specific.lo \
-	stubborn.lo typd_mlc.lo backgraph.lo win32_threads.lo
-libgc_la_OBJECTS = $(am_libgc_la_OBJECTS)
-check_PROGRAMS = gctest$(EXEEXT)
-am_gctest_OBJECTS =
-gctest_OBJECTS = $(am_gctest_OBJECTS)
-gctest_DEPENDENCIES = test.o ./libgc.la
-gctest_LDFLAGS =
-
-DEFS = @DEFS@
-DEFAULT_INCLUDES =  -I. -I$(srcdir)
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/allchblk.Plo ./$(DEPDIR)/alloc.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/backgraph.Plo ./$(DEPDIR)/blacklst.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/checksums.Plo ./$(DEPDIR)/dbg_mlc.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/dyn_load.Plo ./$(DEPDIR)/finalize.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/gc_dlopen.Plo ./$(DEPDIR)/gcj_mlc.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/headers.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/irix_threads.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/linux_threads.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/malloc.Plo ./$(DEPDIR)/mallocx.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/mark.Plo ./$(DEPDIR)/mark_rts.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/misc.Plo ./$(DEPDIR)/new_hblk.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/obj_map.Plo ./$(DEPDIR)/os_dep.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/pcr_interface.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/ptr_chck.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/real_malloc.Plo ./$(DEPDIR)/reclaim.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/solaris_pthreads.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/solaris_threads.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/specific.Plo ./$(DEPDIR)/stubborn.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/typd_mlc.Plo \
-@AMDEP_TRUE@	./$(DEPDIR)/win32_threads.Plo
-CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
-LTCCASCOMPILE = $(LIBTOOL) --mode=compile $(CCAS) $(AM_CCASFLAGS) \
-	$(CCASFLAGS)
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-DIST_SOURCES = $(libgc_la_SOURCES) $(EXTRA_libgc_la_SOURCES) \
-	$(gctest_SOURCES)
-DIST_COMMON = Makefile.am Makefile.in acinclude.m4 aclocal.m4 \
-	config.guess config.sub configure configure.in depcomp \
-	install-sh ltconfig ltmain.sh missing mkinstalldirs
-SOURCES = $(libgc_la_SOURCES) $(EXTRA_libgc_la_SOURCES) $(gctest_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .S .c .lo .o .obj .s
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-
-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
-	cd $(srcdir) && $(AUTOCONF)
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-libLTLIBRARIES_INSTALL = $(INSTALL)
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(libdir)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  if test -f $$p; then \
-	    f="`echo $$p | sed -e 's|^.*/||'`"; \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \
-	  else :; fi; \
-	done
-
-uninstall-libLTLIBRARIES:
-	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	    p="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \
-	  $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
-	done
-
-clean-libLTLIBRARIES:
-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
-libgc.la: $(libgc_la_OBJECTS) $(libgc_la_DEPENDENCIES) 
-	$(LINK) -rpath $(libdir) $(libgc_la_LDFLAGS) $(libgc_la_OBJECTS) $(libgc_la_LIBADD) $(LIBS)
-
-clean-checkPROGRAMS:
-	-test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)
-gctest$(EXEEXT): $(gctest_OBJECTS) $(gctest_DEPENDENCIES) 
-	@rm -f gctest$(EXEEXT)
-	$(LINK) $(gctest_LDFLAGS) $(gctest_OBJECTS) $(gctest_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/allchblk.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backgraph.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blacklst.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/checksums.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbg_mlc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyn_load.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/finalize.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc_dlopen.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gcj_mlc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/headers.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/irix_threads.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/linux_threads.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/malloc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mallocx.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark_rts.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/new_hblk.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obj_map.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_dep.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pcr_interface.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptr_chck.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/real_malloc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reclaim.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/solaris_pthreads.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/solaris_threads.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/specific.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stubborn.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/typd_mlc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/win32_threads.Plo@am__quote@
-
-distclean-depend:
-	-rm -rf ./$(DEPDIR)
-
-.S.o:
-	$(CCASCOMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.S.obj:
-	$(CCASCOMPILE) -c `cygpath -w $<`
-
-.S.lo:
-	$(LTCCASCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.o:
-@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-	$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
-@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-	$(COMPILE) -c `cygpath -w $<`
-
-.c.lo:
-@AMDEP_TRUE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-	$(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
-CCDEPMODE = @CCDEPMODE@
-
-.s.o:
-	$(CCASCOMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.s.obj:
-	$(CCASCOMPILE) -c `cygpath -w $<`
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-
-ETAGS = etags
-ETAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(ETAGS_ARGS)$$tags$$unique" \
-	  || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
-
-check-TESTS: $(TESTS)
-	@failed=0; all=0; xfail=0; xpass=0; \
-	srcdir=$(srcdir); export srcdir; \
-	list='$(TESTS)'; \
-	if test -n "$$list"; then \
-	  for tst in $$list; do \
-	    if test -f ./$$tst; then dir=./; \
-	    elif test -f $$tst; then dir=; \
-	    else dir="$(srcdir)/"; fi; \
-	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *" $$tst "*) \
-	        xpass=`expr $$xpass + 1`; \
-	        failed=`expr $$failed + 1`; \
-	        echo "XPASS: $$tst"; \
-	      ;; \
-	      *) \
-	        echo "PASS: $$tst"; \
-	      ;; \
-	      esac; \
-	    elif test $$? -ne 77; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *" $$tst "*) \
-	        xfail=`expr $$xfail + 1`; \
-	        echo "XFAIL: $$tst"; \
-	      ;; \
-	      *) \
-	        failed=`expr $$failed + 1`; \
-	        echo "FAIL: $$tst"; \
-	      ;; \
-	      esac; \
-	    fi; \
-	  done; \
-	  if test "$$failed" -eq 0; then \
-	    if test "$$xfail" -eq 0; then \
-	      banner="All $$all tests passed"; \
-	    else \
-	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
-	    fi; \
-	  else \
-	    if test "$$xpass" -eq 0; then \
-	      banner="$$failed of $$all tests failed"; \
-	    else \
-	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
-	    fi; \
-	  fi; \
-	  dashes=`echo "$$banner" | sed s/./=/g`; \
-	  echo "$$dashes"; \
-	  echo "$$banner"; \
-	  echo "$$dashes"; \
-	  test "$$failed" -eq 0; \
-	else :; fi
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = .
-distdir = $(PACKAGE)-$(VERSION)
-
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-
-GZIP_ENV = --best
-distcleancheck_listfiles = find . -type f -print
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkinstalldirs) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	$(am__remove_distdir)
-	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
-	  && cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
-	      || { echo "ERROR: files left after uninstall:" ; \
-	           find $$dc_install_base -type f -print ; \
-	           exit 1; } >&2 ) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
-	  && rm -f $(distdir).tar.gz \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@echo "$(distdir).tar.gz is ready for distribution" | \
-	  sed 'h;s/./=/g;p;x;p;x'
-distcleancheck: distclean
-	if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
-	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile $(LTLIBRARIES)
-
-installdirs:
-	$(mkinstalldirs) $(DESTDIR)$(libdir)
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
-	clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f config.status config.cache config.log
-distclean-am: clean-am distclean-compile distclean-depend \
-	distclean-generic distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-libLTLIBRARIES
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES
-
-.PHONY: GTAGS all all-am check check-TESTS check-am clean \
-	clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
-	clean-libtool dist dist-all dist-gzip distcheck distclean \
-	distclean-compile distclean-depend distclean-generic \
-	distclean-libtool distclean-tags distcleancheck distdir dvi \
-	dvi-am info info-am install install-am install-data \
-	install-data-am install-exec install-exec-am install-info \
-	install-info-am install-libLTLIBRARIES install-man \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	tags uninstall uninstall-am uninstall-info-am \
-	uninstall-libLTLIBRARIES
-
-# The following hack produces a warning from automake, but we need it in order 
-# to build a file from a subdirectory. FIXME.
-test.o:	$(srcdir)/tests/test.c
-	$(COMPILE) -c $(srcdir)/tests/test.c
-$(all_objs) : include/private/gcconfig.h include/private/gc_priv.h \
-include/private/gc_hdrs.h include/gc.h include/gc_gcj.h include/gc_mark.h
-
-.s.lo:
-	$(LTCOMPILE) -Wp,-P -x assembler-with-cpp -c $<
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: