Updates from 0.2.1 into 0.2.1-inu-1.5release-0-2-1-inu-1-5

1 files changed, 0 insertions, 149 deletions

diff --git a/gc/README.win32 b/gc/README.win32
deleted file mode 100644
index d78816b..0000000
--- a/gc/README.win32
+++ /dev/null
@@ -1,149 +0,0 @@
-The collector has only been compiled under Windows NT, with the
-original Microsoft SDK, with Visual C++ 2.0 and later, with
-the GNU win32 environment, with Borland 4.5, and recently with
-Watcom C.
-
-It runs under both win32s and win32, but with different semantics.
-Under win32, all writable pages outside of the heaps and stack are
-scanned for roots.  Thus the collector sees pointers in DLL data
-segments.  Under win32s, only the main data segment is scanned.
-(The main data segment should always be scanned.  Under some
-versions of win32s, other regions may also be scanned.)
-Thus all accessible objects should be accessible from local variables
-or variables in the main data segment.  Alternatively, other data
-segments (e.g. in DLLs) may be registered with the collector by
-calling GC_init() and then GC_register_root_section(a), where
-a is the address of some variable inside the data segment.  (Duplicate
-registrations are ignored, but not terribly quickly.)
-
-(There are two reasons for this.  We didn't want to see many 16:16
-pointers.  And the VirtualQuery call has different semantics under
-the two systems, and under different versions of win32s.)
-
-The collector test program "gctest" is linked as a GUI application,
-but does not open any windows.  Its output appears in the file
-"gc.log".  It may be started from the file manager.  The hour glass
-cursor will appear as long as it's running.  If it is started from the
-command line, it will usually run in the background.  Wait a few
-minutes (a few seconds on a modern machine) before you check the output.
-You should see either a failure indication or a "Collector appears to
-work" message.
-
-The cord test program has not been ported (but should port
-easily).  A toy editor (cord/de.exe) based on cords (heavyweight
-strings represented as trees) has been ported and is included.
-It runs fine under either win32 or win32S.  It serves as an example
-of a true Windows application, except that it was written by a
-nonexpert Windows programmer.  (There are some peculiarities
-in the way files are displayed.  The <cr> is displayed explicitly
-for standard DOS text files.  As in the UNIX version, control
-characters are displayed explicitly, but in this case as red text.
-This may be suboptimal for some tastes and/or sets of default
-window colors.)
-
-For Microsoft development tools, rename NT_MAKEFILE as
-MAKEFILE.  (Make sure that the CPU environment variable is defined
-to be i386.)
-
-For GNU-win32, use the regular makefile, possibly after uncommenting
-the line "include Makefile.DLLs".  The latter should be necessary only
-if you want to package the collector as a DLL.  The GNU-win32 port is
-believed to work only for b18, not b19, probably dues to linker changes
-in b19.  This is probably fixable with a different definition of
-DATASTART and DATAEND in gcconfig.h.
-
-For Borland tools, use BCC_MAKEFILE.  Note that
-Borland's compiler defaults to 1 byte alignment in structures (-a1),
-whereas Visual C++ appears to default to 8 byte alignment (/Zp8).
-The garbage collector in its default configuration EXPECTS AT
-LEAST 4 BYTE ALIGNMENT.  Thus the BORLAND DEFAULT MUST
-BE OVERRIDDEN.  (In my opinion, it should usually be anyway.
-I expect that -a1 introduces major performance penalties on a
-486 or Pentium.)  Note that this changes structure layouts.  (As a last
-resort, gcconfig.h can be changed to allow 1 byte alignment.  But
-this has significant negative performance implications.)
-The Makefile is set up to assume Borland 4.5.  If you have another
-version, change the line near the top.  By default, it does not
-require the assembler.  If you do have the assembler, I recommend
-removing the -DUSE_GENERIC.
-
-Incremental collection support was recently added.  This is
-currently pretty simpleminded.  Pages are protected.  Protection
-faults are caught by a handler installed at the bottom of the handler
-stack.  This is both slow and interacts poorly with a debugger.
-Whenever possible, I recommend adding a call to
-GC_enable_incremental at the last possible moment, after most
-debugging is complete.  Unlike the UNIX versions, no system
-calls are wrapped by the collector itself.  It may be necessary
-to wrap ReadFile calls that use a buffer in the heap, so that the
-call does not encounter a protection fault while it's running.
-(As usual, none of this is an issue unless GC_enable_incremental
-is called.)
-
-Note that incremental collection is disabled with -DSMALL_CONFIG,
-which is the default for win32.  If you need incremental collection,
-undefine SMALL_CONFIG.
-
-Incremental collection is not supported under win32s, and it may not
-be possible to do so.  However, win32 applications that attempt to use
-incremental collection should continue to run, since the
-collector detects if it's running under win32s and turns calls to
-GC_enable_incremental() into noops.
-
-James Clark has contributed the necessary code to support win32 threads.
-This code is known to exhibit some problems with incremental collection
-enabled.  Use NT_THREADS_MAKEFILE (a.k.a gc.mak) instead of NT_MAKEFILE
-to build this version.  Note that this requires some files whose names
-are more than 8 + 3 characters long.  Thus you should unpack the tar file
-so that long file names are preserved.  To build the garbage collector
-test with VC++ from the command line, use
-
-nmake /F ".\gc.mak" CFG="gctest - Win32 Release"
-
-This requires that the subdirectory gctest\Release exist.
-The test program and DLL will reside in the Release directory.
-
-This version relies on the collector residing in a dll.
-
-This version currently supports incremental collection only if it is
-enabled before any additional threads are created.
-Version 4.13 attempts to fix some of the earlier problems, but there
-may be other issues.  If you need solid support for win32 threads, you
-might check with Geodesic Systems.  Their collector must be licensed,
-but they have invested far more time in win32-specific issues.
-
-Hans
-
-Ivan V. Demakov's README for the Watcom port:
-
-The collector has been compiled with Watcom C 10.6 and 11.0.
-It runs under win32, win32s, and even under msdos with dos4gw
-dos-extender. It should also run under OS/2, though this isn't
-tested. Under win32 the collector can be built either as dll
-or as static library.
-
-Note that all compilations were done under Windows 95 or NT.
-For unknown reason compiling under Windows 3.11 for NT (one
-attempt has been made) leads to broken executables.
-
-Incremental collection is not supported.
-
-cord is not ported.
-
-Before compiling you may need to edit WCC_MAKEFILE to set target
-platform, library type (dynamic or static), calling conventions, and
-optimization options.
-
-To compile the collector and testing programs use the command:
-    wmake -f WCC_MAKEFILE
-
-All programs using gc should be compiled with 4-byte alignment.
-For further explanations on this see comments about Borland.
-
-If gc compiled as dll, the macro ``GC_DLL'' should be defined before
-including "gc.h" (for example, with -DGC_DLL compiler option). It's
-important, otherwise resulting programs will not run.
-
-Ivan Demakov (email: ivan@tgrad.nsk.su)
-
-