diff options
Diffstat (limited to '')
| -rw-r--r-- | ChangeLog | 9 | ||||
| -rw-r--r-- | Makefile.in | 2 | ||||
| -rwxr-xr-x | install-sh | 315 |
3 files changed, 270 insertions, 56 deletions
@@ -1,3 +1,10 @@ +2004-04-27 SAKAI Kiyotaka <ksakai@kso.netwk.ntt-at.co.jp> + + * [w3m-dev 04068] install-sh problem + [w3m-dev 04069] install-sh problem 2 + * Makefile.in (MAKE_ARGS): delete INSTALL + * install-sh: replace with X Consortium install-sh (from automake) + 2004-04-27 Fumitoshi UKAI <ukai@debian.or.jp> * [w3m-dev 04073] Re: run configure in another directory @@ -8466,4 +8473,4 @@ a * [w3m-dev 03276] compile error on EWS4800 * release-0-2-1 * import w3m-0.2.1 -$Id: ChangeLog,v 1.922 2004/04/26 17:00:37 ukai Exp $ +$Id: ChangeLog,v 1.923 2004/04/26 17:04:47 ukai Exp $ diff --git a/Makefile.in b/Makefile.in index bf099d7..6f29477 100644 --- a/Makefile.in +++ b/Makefile.in @@ -49,7 +49,7 @@ W3M_LIBS = @W3M_LIBS@ WCTARGET = @WCTARGET@ NLSTARGET = @NLSTARGET@ -MAKE_ARGS = PERL='$(PERL)' MKDIR='$(MKDIR)' INSTALL='$(INSTALL)' \ +MAKE_ARGS = PERL='$(PERL)' MKDIR='$(MKDIR)' \ BIN_DIR='$(bindir)' AUXBIN_DIR='$(AUXBIN_DIR)' \ CGIBIN_DIR='$(CGIBIN_DIR)' \ HELP_DIR='$(HELP_DIR)' MAN_DIR='$(mandir)' ETC_DIR='$(ETC_DIR)' \ @@ -1,62 +1,269 @@ -#! /bin/sh -# $Id: install-sh,v 1.6 2002/11/06 15:09:16 ukai Exp $ - -set -e - -while : -do - case $1 in - -m) - mode=$2 - shift; shift - ;; - -s) - if [ -n "$STRIP" ]; then - strip=$STRIP - else - strip=strip - fi - shift; - ;; - -o) owner=$2 - shift; shift - ;; - -g) group=$2 - shift; shift - ;; - -*) - shift - ;; - *) - break - esac +#!/bin/sh +# +# install - install a program, script, or datafile +# +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +transformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac done -if [ $# -lt 2 ]; then - echo "usage: $0 [-m mode] [-s] file1 file2" - exit 1 +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true fi -file=$1 -if [ -d $2 ]; then - dest=$2/$file +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + chmodcmd="" + else + instcmd=mkdir + fi else - dest=$2 -fi -if [ -f $dest ]; then - rm -f $dest -fi -cp $file $dest -if [ -n "$strip" ]; then - $strip $dest -fi -if [ -n "$owner" ]; then - chown $owner $dest -fi -if [ -n "$group" ]; then - chgrp $group $dest +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi fi -if [ -n "$mode" ]; then - chmod $mode $dest + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 |