diff options
Diffstat (limited to '')
| -rw-r--r-- | gc/Makefile | 53 | ||||
| -rw-r--r-- | gc/Makefile.am | 69 | ||||
| -rw-r--r-- | gc/Makefile.direct | 53 | ||||
| -rw-r--r-- | gc/Makefile.dj | 14 | ||||
| -rw-r--r-- | gc/Makefile.in | 749 |
5 files changed, 543 insertions, 395 deletions
diff --git a/gc/Makefile b/gc/Makefile index 8e8ed25..61a0b64 100644 --- a/gc/Makefile +++ b/gc/Makefile @@ -70,6 +70,8 @@ HOSTCFLAGS=$(CFLAGS) # -DGC_OSF1_THREADS enables support for Tru64 pthreads. Untested. # -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads. Untested. # Appeared to run into some underlying thread problems. +# -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads. +# See README.DGUX386. # -DALL_INTERIOR_POINTERS allows all pointers to the interior # of objects to be recognized. (See gc_priv.h for consequences.) # Alternatively, GC_all_interior_pointers can be set at process @@ -103,9 +105,9 @@ HOSTCFLAGS=$(CFLAGS) # See gc_cpp.h for details. No effect on the C part of the collector. # This is defined implicitly in a few environments. Must also be defined # by clients that use gc_cpp.h. -# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined -# as aliases for X, GC_realloc, and GC_free, respectively. -# Calloc is redefined in terms of the new malloc. X should +# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be +# defined as aliases for X, GC_realloc, and GC_free, respectively. +# Calloc and strdup are redefined in terms of the new malloc. X should # be either GC_malloc or GC_malloc_uncollectable, or # GC_debug_malloc_replacement. (The latter invokes GC_debug_malloc # with dummy source location information, but still results in @@ -114,7 +116,9 @@ HOSTCFLAGS=$(CFLAGS) # you don't want to (or can't) look at. It may not work for # existing code, but it often does. Neither works on all platforms, # since some ports use malloc or calloc to obtain system memory. -# (Probably works for UNIX, and win32.) +# (Probably works for UNIX, and win32.) If you build with DBG_HDRS_ALL, +# you should only use GC_debug_malloc_replacement as a malloc +# replacement. # -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X. # The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement, # together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to @@ -183,8 +187,12 @@ HOSTCFLAGS=$(CFLAGS) # allocated through the debugging interface. Affects the amount of # information generated in leak reports. Only matters on platforms # on which we can quickly generate call stacks, currently Linux/(X86 & SPARC) -# and Solaris/SPARC. Turns on call chain saving on X86. On X86, client +# and Solaris/SPARC and platforms that provide execinfo.h. +# Default is zero. On X86, client # code should NOT be compiled with -fomit-frame-pointer. +# -DSAVE_CALL_NARGS=<n> Set the number of functions arguments to be +# saved with each call frame. Default is zero. Ignored if we +# don't know how to retrieve arguments on the platform. # -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly # altered stubborn objects, at substantial performance cost. # Use only for debugging of the incremental collector. @@ -230,6 +238,9 @@ HOSTCFLAGS=$(CFLAGS) # -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus # makes incremental collection easier. Was enabled by default until 6.0. # Rarely used, to my knowledge. +# -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed +# from a multithreaded parent. Currently only supported by linux_threads.c. +# (Similar code should work on Solaris or Irix, but it hasn't been tried.) # CXXFLAGS= $(CFLAGS) @@ -245,16 +256,16 @@ CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordt CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o -SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \ - sparc_mach_dep.s include/gc.h include/gc_typed.h \ +SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s alpha_mach_dep.S \ + sparc_mach_dep.S include/gc.h include/gc_typed.h \ include/private/gc_hdrs.h include/private/gc_priv.h \ include/private/gcconfig.h include/private/gc_pmark.h \ include/gc_inl.h include/gc_inline.h include/gc_mark.h \ threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \ gcname.c include/weakpointer.h include/private/gc_locks.h \ gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \ - include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \ - sparc_netbsd_mach_dep.s \ + include/new_gc_alloc.h include/gc_allocator.h \ + include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \ include/private/solaris_threads.h include/gc_backptr.h \ hpux_test_and_clear.s include/gc_gcj.h \ include/gc_local_alloc.h include/private/dbg_mlc.h \ @@ -270,15 +281,16 @@ DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \ doc/README.win32 doc/barrett_diagram doc/README \ doc/README.contributors doc/README.changes doc/gc.man \ doc/README.environment doc/tree.html doc/gcdescr.html \ - doc/README.autoconf doc/README.macros doc/README.ews4800 + doc/README.autoconf doc/README.macros doc/README.ews4800 \ + doc/README.DGUX386 doc/README.arm.cross TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \ tests/leak_test.c tests/thread_leak_test.c GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \ libtool.m4 install-sh configure.host Makefile.in \ - aclocal.m4 config.sub config.guess ltconfig \ - ltmain.sh mkinstalldirs + ltconfig aclocal.m4 config.sub config.guess \ + ltmain.sh mkinstalldirs depcomp missing OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \ BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \ @@ -439,18 +451,19 @@ liblinuxgc.so: $(OBJS) dyn_load.o # gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo # touch liblinuxgc.so -mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s \ - $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s $(UTILS) +mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.S \ + $(srcdir)/mips_ultrix_mach_dep.s \ + $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s \ + $(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \ + $(srcdir)/ia64_save_regs_in_stack.s \ + $(srcdir)/sparc_netbsd_mach_dep.s $(UTILS) rm -f mach_dep.o - ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s + ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.S ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s - ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s ./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s -# ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s -# alpha_mach_dep.s assumes that pointers are not saved in fp registers. -# Gcc on a 21264 can spill pointers to fp registers. Oops. - ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s + ./if_mach ALPHA "" $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S + ./if_mach SPARC SUNOS5 $(CC) -c -o mach_dep.o $(srcdir)/sparc_mach_dep.S ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s ./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s ./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s diff --git a/gc/Makefile.am b/gc/Makefile.am index 2cefd82..2c8e287 100644 --- a/gc/Makefile.am +++ b/gc/Makefile.am @@ -10,6 +10,7 @@ # modified is included with the above copyright notice. # # Original author: Tom Tromey +# Severely truncated by Hans-J. Boehm ## Process this file with automake to produce Makefile.in. @@ -17,43 +18,26 @@ ## files that should be in the distribution are not mentioned in this ## Makefile.am. -AUTOMAKE_OPTIONS = cygnus - -# Multilib support variables. -MULTISRCTOP = -MULTIBUILDTOP = -MULTIDIRS = -MULTISUBDIR = -MULTIDO = true -MULTICLEAN = true - -## Install a library built with a cross compiler in tooldir, not -## libdir. -if USE_LIBDIR -toolexeclibdir = $(libdir)$(MULTISUBDIR) -else -toolexecdir = $(exec_prefix)/$(target_alias) -toolexeclibdir = $(toolexecdir)/lib$(MULTISUBDIR) -endif - -toolexeclib_LTLIBRARIES = $(target_all) -EXTRA_LTLIBRARIES = libgc.la +AUTOMAKE_OPTIONS = foreign + +lib_LTLIBRARIES = libgc.la + libgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \ dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c irix_threads.c \ linux_threads.c malloc.c mallocx.c mark.c mark_rts.c misc.c new_hblk.c \ obj_map.c os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \ solaris_pthreads.c solaris_threads.c specific.c stubborn.c typd_mlc.c \ -backgraph.c +backgraph.c win32_threads.c # Include THREADLIBS here to ensure that the correct versions of # linuxthread semaphore functions get linked: libgc_la_LIBADD = @addobjs@ $(THREADLIBS) libgc_la_DEPENDENCIES = @addobjs@ -libgc_la_LDFLAGS = -version-info 1:1:0 -rpath $(toolexeclibdir) +libgc_la_LDFLAGS = -version-info 1:1:0 EXTRA_libgc_la_SOURCES = alpha_mach_dep.s \ -mips_sgi_mach_dep.s mips_ultrix_mach_dep.s powerpc_macosx_mach_dep.s \ -rs6000_mach_dep.s sparc_mach_dep.s sparc_netbsd_mach_dep.s \ +mips_sgi_mach_dep.S mips_ultrix_mach_dep.s powerpc_macosx_mach_dep.s \ +rs6000_mach_dep.s sparc_mach_dep.S sparc_netbsd_mach_dep.s \ sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s AM_CXXFLAGS = @GC_CFLAGS@ @@ -62,12 +46,13 @@ AM_CFLAGS = @GC_CFLAGS@ check_PROGRAMS = gctest # The following hack produces a warning from automake, but we need it in order # to build a file from a subdirectory. FIXME. -test.o: tests/test.c - $(COMPILE) -c tests/test.c +test.o: $(srcdir)/tests/test.c + $(COMPILE) -c $(srcdir)/tests/test.c # Using $< in the above seems to fail with the HP/UX on Itanium make. -gctest_OBJECTS = test.o -gctest_LDADD = ./libgc.la $(THREADLIBS) $(EXTRA_TEST_LIBS) +# gctest_OBJECTS = test.o +gctest_SOURCES = +gctest_LDADD = test.o ./libgc.la $(THREADLIBS) $(EXTRA_TEST_LIBS) TESTS_ENVIRONMENT = LD_LIBRARY_PATH=../../$(MULTIBUILDTOP)gcc TESTS = gctest @@ -89,8 +74,6 @@ LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) \ $(AM_CFLAGS) $(MY_CFLAGS) $(GC_CFLAGS) LINK = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(MY_CFLAGS) $(LDFLAGS) -o $@ -AM_CFLAGS = @GC_CFLAGS@ - # Work around what appears to be a GNU make bug handling MAKEFLAGS # values defined in terms of make variables, as is the case for CC and # friends when we are called from the top level Makefile. @@ -134,28 +117,4 @@ AM_MAKEFLAGS = \ CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host -# Multilib support. -.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \ - maintainer-clean-multi - -all-am: all-multi -install-am: install-multi -mostlyclean-am: mostlyclean-multi -clean-am: clean-multi -distclean-am: distclean-multi -maintainer-clean-am: maintainer-clean-multi - -all-multi: - $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do -install-multi: - $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do -mostlyclean-multi: - $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean -clean-multi: - $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean -distclean-multi: - $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean -maintainer-clean-multi: - $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean - MAKEOVERRIDES= diff --git a/gc/Makefile.direct b/gc/Makefile.direct index 8e8ed25..61a0b64 100644 --- a/gc/Makefile.direct +++ b/gc/Makefile.direct @@ -70,6 +70,8 @@ HOSTCFLAGS=$(CFLAGS) # -DGC_OSF1_THREADS enables support for Tru64 pthreads. Untested. # -DGC_FREEBSD_THREADS enables support for FreeBSD pthreads. Untested. # Appeared to run into some underlying thread problems. +# -DGC_DGUX386_THREADS enables support for DB/UX on I386 threads. +# See README.DGUX386. # -DALL_INTERIOR_POINTERS allows all pointers to the interior # of objects to be recognized. (See gc_priv.h for consequences.) # Alternatively, GC_all_interior_pointers can be set at process @@ -103,9 +105,9 @@ HOSTCFLAGS=$(CFLAGS) # See gc_cpp.h for details. No effect on the C part of the collector. # This is defined implicitly in a few environments. Must also be defined # by clients that use gc_cpp.h. -# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined -# as aliases for X, GC_realloc, and GC_free, respectively. -# Calloc is redefined in terms of the new malloc. X should +# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be +# defined as aliases for X, GC_realloc, and GC_free, respectively. +# Calloc and strdup are redefined in terms of the new malloc. X should # be either GC_malloc or GC_malloc_uncollectable, or # GC_debug_malloc_replacement. (The latter invokes GC_debug_malloc # with dummy source location information, but still results in @@ -114,7 +116,9 @@ HOSTCFLAGS=$(CFLAGS) # you don't want to (or can't) look at. It may not work for # existing code, but it often does. Neither works on all platforms, # since some ports use malloc or calloc to obtain system memory. -# (Probably works for UNIX, and win32.) +# (Probably works for UNIX, and win32.) If you build with DBG_HDRS_ALL, +# you should only use GC_debug_malloc_replacement as a malloc +# replacement. # -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X. # The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement, # together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to @@ -183,8 +187,12 @@ HOSTCFLAGS=$(CFLAGS) # allocated through the debugging interface. Affects the amount of # information generated in leak reports. Only matters on platforms # on which we can quickly generate call stacks, currently Linux/(X86 & SPARC) -# and Solaris/SPARC. Turns on call chain saving on X86. On X86, client +# and Solaris/SPARC and platforms that provide execinfo.h. +# Default is zero. On X86, client # code should NOT be compiled with -fomit-frame-pointer. +# -DSAVE_CALL_NARGS=<n> Set the number of functions arguments to be +# saved with each call frame. Default is zero. Ignored if we +# don't know how to retrieve arguments on the platform. # -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly # altered stubborn objects, at substantial performance cost. # Use only for debugging of the incremental collector. @@ -230,6 +238,9 @@ HOSTCFLAGS=$(CFLAGS) # -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus # makes incremental collection easier. Was enabled by default until 6.0. # Rarely used, to my knowledge. +# -DHANDLE_FORK attempts to make GC_malloc() work in a child process fork()ed +# from a multithreaded parent. Currently only supported by linux_threads.c. +# (Similar code should work on Solaris or Irix, but it hasn't been tried.) # CXXFLAGS= $(CFLAGS) @@ -245,16 +256,16 @@ CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordt CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o -SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \ - sparc_mach_dep.s include/gc.h include/gc_typed.h \ +SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s alpha_mach_dep.S \ + sparc_mach_dep.S include/gc.h include/gc_typed.h \ include/private/gc_hdrs.h include/private/gc_priv.h \ include/private/gcconfig.h include/private/gc_pmark.h \ include/gc_inl.h include/gc_inline.h include/gc_mark.h \ threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \ gcname.c include/weakpointer.h include/private/gc_locks.h \ gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \ - include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \ - sparc_netbsd_mach_dep.s \ + include/new_gc_alloc.h include/gc_allocator.h \ + include/javaxfc.h sparc_sunos4_mach_dep.s sparc_netbsd_mach_dep.s \ include/private/solaris_threads.h include/gc_backptr.h \ hpux_test_and_clear.s include/gc_gcj.h \ include/gc_local_alloc.h include/private/dbg_mlc.h \ @@ -270,15 +281,16 @@ DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \ doc/README.win32 doc/barrett_diagram doc/README \ doc/README.contributors doc/README.changes doc/gc.man \ doc/README.environment doc/tree.html doc/gcdescr.html \ - doc/README.autoconf doc/README.macros doc/README.ews4800 + doc/README.autoconf doc/README.macros doc/README.ews4800 \ + doc/README.DGUX386 doc/README.arm.cross TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \ tests/leak_test.c tests/thread_leak_test.c GNU_BUILD_FILES= configure.in Makefile.am configure acinclude.m4 \ libtool.m4 install-sh configure.host Makefile.in \ - aclocal.m4 config.sub config.guess ltconfig \ - ltmain.sh mkinstalldirs + ltconfig aclocal.m4 config.sub config.guess \ + ltmain.sh mkinstalldirs depcomp missing OTHER_MAKEFILES= OS2_MAKEFILE NT_MAKEFILE NT_THREADS_MAKEFILE gc.mak \ BCC_MAKEFILE EMX_MAKEFILE WCC_MAKEFILE Makefile.dj \ @@ -439,18 +451,19 @@ liblinuxgc.so: $(OBJS) dyn_load.o # gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo # touch liblinuxgc.so -mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s \ - $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s $(UTILS) +mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.S \ + $(srcdir)/mips_ultrix_mach_dep.s \ + $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s \ + $(srcdir)/sparc_mach_dep.S $(srcdir)/sparc_sunos4_mach_dep.s \ + $(srcdir)/ia64_save_regs_in_stack.s \ + $(srcdir)/sparc_netbsd_mach_dep.s $(UTILS) rm -f mach_dep.o - ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s + ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.S ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s - ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s ./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s -# ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s -# alpha_mach_dep.s assumes that pointers are not saved in fp registers. -# Gcc on a 21264 can spill pointers to fp registers. Oops. - ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s + ./if_mach ALPHA "" $(CC) -c -o mach_dep.o $(srcdir)/alpha_mach_dep.S + ./if_mach SPARC SUNOS5 $(CC) -c -o mach_dep.o $(srcdir)/sparc_mach_dep.S ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s ./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s ./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s diff --git a/gc/Makefile.dj b/gc/Makefile.dj index 7aadaf3..146c83b 100644 --- a/gc/Makefile.dj +++ b/gc/Makefile.dj @@ -152,7 +152,7 @@ CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DALL_INTERIO # currently probably works only with Linux. -CXXFLAGS= $(CFLAGS) -DOPERATOR_NEW_ARRAY +CXXFLAGS= $(CFLAGS) -DGC_OPERATOR_NEW_ARRAY AR= ar RANLIB= ranlib @@ -165,8 +165,8 @@ CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordt CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o -SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \ - sparc_mach_dep.s include/gc.h include/gc_typed.h \ +SRCS= $(CSRCS) mips_sgi_mach_dep.S rs6000_mach_dep.s alpha_mach_dep.S \ + sparc_mach_dep.S include/gc.h include/gc_typed.h \ include/private/gc_hdrs.h include/private/gc_priv.h \ include/private/gcconfig.h include/private/gc_mark.h \ include/gc_inl.h include/gc_inline.h gc.man \ @@ -284,16 +284,16 @@ liblinuxgc.so: $(OBJS) dyn_load.o gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o -lo ln liblinuxgc.so libgc.so -mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s \ +mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.S $(srcdir)/mips_ultrix_mach_dep.s \ $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s $(UTILS) rm -f mach_dep.o - ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s + ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.S ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s ./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s - ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s - ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s + ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.S + ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.S ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c diff --git a/gc/Makefile.in b/gc/Makefile.in index 4215138..5701522 100644 --- a/gc/Makefile.in +++ b/gc/Makefile.in @@ -1,6 +1,8 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated by automake 1.6.1 from Makefile.am. +# @configure_input@ -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -10,6 +12,8 @@ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. +@SET_MAKE@ + # Copyright (c) 1999-2001 by Red Hat, Inc. All rights reserved. # # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED @@ -22,8 +26,7 @@ # modified is included with the above copyright notice. # # Original author: Tom Tromey - - +# Severely truncated by Hans-J. Boehm SHELL = @SHELL@ srcdir = @srcdir@ @@ -44,13 +47,9 @@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include - -DESTDIR = - pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ - top_builddir = . ACLOCAL = @ACLOCAL@ @@ -58,453 +57,617 @@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_HEADER = $(INSTALL_DATA) transform = @program_transform_name@ - NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : -build_alias = @build_alias@ -build_triplet = @build@ host_alias = @host_alias@ host_triplet = @host@ -target_alias = @target_alias@ -target_triplet = @target@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +AMTAR = @AMTAR@ AR = @AR@ AS = @AS@ +AWK = @AWK@ CC = @CC@ -CPP = @CPP@ +CCAS = @CCAS@ +CCASFLAGS = @CCASFLAGS@ +CFLAGS = @CFLAGS@ CXX = @CXX@ -CXXCPP = @CXXCPP@ +CXXFLAGS = @CXXFLAGS@ CXXINCLUDES = @CXXINCLUDES@ +DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ -EXEEXT = @EXEEXT@ +ECHO = @ECHO@ EXTRA_TEST_LIBS = @EXTRA_TEST_LIBS@ GC_CFLAGS = @GC_CFLAGS@ INCLUDES = @INCLUDES@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ MY_CFLAGS = @MY_CFLAGS@ OBJDUMP = @OBJDUMP@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ +STRIP = @STRIP@ THREADLIBS = @THREADLIBS@ VERSION = @VERSION@ addobjs = @addobjs@ +am__include = @am__include@ +am__quote = @am__quote@ gc_basedir = @gc_basedir@ +install_sh = @install_sh@ target_all = @target_all@ -AUTOMAKE_OPTIONS = cygnus +AUTOMAKE_OPTIONS = foreign -# Multilib support variables. -MULTISRCTOP = -MULTIBUILDTOP = -MULTIDIRS = -MULTISUBDIR = -MULTIDO = true -MULTICLEAN = true -@USE_LIBDIR_TRUE@toolexeclibdir = $(libdir)$(MULTISUBDIR) -@USE_LIBDIR_FALSE@toolexeclibdir = $(toolexecdir)/lib$(MULTISUBDIR) -@USE_LIBDIR_FALSE@toolexecdir = $(exec_prefix)/$(target_alias) +lib_LTLIBRARIES = libgc.la -toolexeclib_LTLIBRARIES = $(target_all) -EXTRA_LTLIBRARIES = libgc.la -libgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c irix_threads.c linux_threads.c malloc.c mallocx.c mark.c mark_rts.c misc.c new_hblk.c obj_map.c os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c solaris_pthreads.c solaris_threads.c specific.c stubborn.c typd_mlc.c backgraph.c +libgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \ +dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c irix_threads.c \ +linux_threads.c malloc.c mallocx.c mark.c mark_rts.c misc.c new_hblk.c \ +obj_map.c os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \ +solaris_pthreads.c solaris_threads.c specific.c stubborn.c typd_mlc.c \ +backgraph.c win32_threads.c # Include THREADLIBS here to ensure that the correct versions of # linuxthread semaphore functions get linked: libgc_la_LIBADD = @addobjs@ $(THREADLIBS) libgc_la_DEPENDENCIES = @addobjs@ -libgc_la_LDFLAGS = -version-info 1:1:0 -rpath $(toolexeclibdir) +libgc_la_LDFLAGS = -version-info 1:1:0 -EXTRA_libgc_la_SOURCES = alpha_mach_dep.s mips_sgi_mach_dep.s mips_ultrix_mach_dep.s powerpc_macosx_mach_dep.s rs6000_mach_dep.s sparc_mach_dep.s sparc_netbsd_mach_dep.s sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s +EXTRA_libgc_la_SOURCES = alpha_mach_dep.s \ +mips_sgi_mach_dep.S mips_ultrix_mach_dep.s powerpc_macosx_mach_dep.s \ +rs6000_mach_dep.s sparc_mach_dep.S sparc_netbsd_mach_dep.s \ +sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s AM_CXXFLAGS = @GC_CFLAGS@ - AM_CFLAGS = @GC_CFLAGS@ check_PROGRAMS = gctest # Using $< in the above seems to fail with the HP/UX on Itanium make. -gctest_OBJECTS = test.o -gctest_LDADD = ./libgc.la $(THREADLIBS) $(EXTRA_TEST_LIBS) +# gctest_OBJECTS = test.o +gctest_SOURCES = +gctest_LDADD = test.o ./libgc.la $(THREADLIBS) $(EXTRA_TEST_LIBS) TESTS_ENVIRONMENT = LD_LIBRARY_PATH=../../$(MULTIBUILDTOP)gcc TESTS = gctest all_objs = @addobjs@ $(libgc_la_OBJECTS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(MY_CFLAGS) $(GC_CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) \ + $(AM_CFLAGS) $(MY_CFLAGS) $(GC_CFLAGS) LINK = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(MY_CFLAGS) $(LDFLAGS) -o $@ # Work around what appears to be a GNU make bug handling MAKEFLAGS # values defined in terms of make variables, as is the case for CC and # friends when we are called from the top level Makefile. -AM_MAKEFLAGS = "AR_FLAGS=$(AR_FLAGS)" "CC_FOR_BUILD=$(CC_FOR_BUILD)" "CFLAGS=$(CFLAGS)" "CXXFLAGS=$(CXXFLAGS)" "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" "INSTALL=$(INSTALL)" "INSTALL_DATA=$(INSTALL_DATA)" "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" "LDFLAGS=$(LDFLAGS)" "LIBCFLAGS=$(LIBCFLAGS)" "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" "MAKE=$(MAKE)" "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" "PICFLAG=$(PICFLAG)" "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" "SHELL=$(SHELL)" "EXPECT=$(EXPECT)" "RUNTEST=$(RUNTEST)" "RUNTESTFLAGS=$(RUNTESTFLAGS)" "exec_prefix=$(exec_prefix)" "infodir=$(infodir)" "libdir=$(libdir)" "prefix=$(prefix)" "tooldir=$(tooldir)" "AR=$(AR)" "AS=$(AS)" "CC=$(CC)" "CXX=$(CXX)" "LD=$(LD)" "LIBCFLAGS=$(LIBCFLAGS)" "NM=$(NM)" "PICFLAG=$(PICFLAG)" "RANLIB=$(RANLIB)" "DESTDIR=$(DESTDIR)" +AM_MAKEFLAGS = \ + "AR_FLAGS=$(AR_FLAGS)" \ + "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ + "CFLAGS=$(CFLAGS)" \ + "CXXFLAGS=$(CXXFLAGS)" \ + "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ + "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ + "INSTALL=$(INSTALL)" \ + "INSTALL_DATA=$(INSTALL_DATA)" \ + "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ + "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \ + "LDFLAGS=$(LDFLAGS)" \ + "LIBCFLAGS=$(LIBCFLAGS)" \ + "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ + "MAKE=$(MAKE)" \ + "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ + "PICFLAG=$(PICFLAG)" \ + "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ + "SHELL=$(SHELL)" \ + "EXPECT=$(EXPECT)" \ + "RUNTEST=$(RUNTEST)" \ + "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ + "exec_prefix=$(exec_prefix)" \ + "infodir=$(infodir)" \ + "libdir=$(libdir)" \ + "prefix=$(prefix)" \ + "tooldir=$(tooldir)" \ + "AR=$(AR)" \ + "AS=$(AS)" \ + "CC=$(CC)" \ + "CXX=$(CXX)" \ + "LD=$(LD)" \ + "LIBCFLAGS=$(LIBCFLAGS)" \ + "NM=$(NM)" \ + "PICFLAG=$(PICFLAG)" \ + "RANLIB=$(RANLIB)" \ + "DESTDIR=$(DESTDIR)" CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host MAKEOVERRIDES = +subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -mkinstalldirs = $(SHELL) $(top_srcdir)/$gc_basedir/mkinstalldirs -CONFIG_CLEAN_FILES = -LTLIBRARIES = $(toolexeclib_LTLIBRARIES) - - -DEFS = @DEFS@ -I. -I$(srcdir) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_CLEAN_FILES = +LTLIBRARIES = $(lib_LTLIBRARIES) + +am_libgc_la_OBJECTS = allchblk.lo alloc.lo blacklst.lo checksums.lo \ + dbg_mlc.lo dyn_load.lo finalize.lo gc_dlopen.lo gcj_mlc.lo \ + headers.lo irix_threads.lo linux_threads.lo malloc.lo \ + mallocx.lo mark.lo mark_rts.lo misc.lo new_hblk.lo obj_map.lo \ + os_dep.lo pcr_interface.lo ptr_chck.lo real_malloc.lo \ + reclaim.lo solaris_pthreads.lo solaris_threads.lo specific.lo \ + stubborn.lo typd_mlc.lo backgraph.lo win32_threads.lo +libgc_la_OBJECTS = $(am_libgc_la_OBJECTS) +check_PROGRAMS = gctest$(EXEEXT) +am_gctest_OBJECTS = +gctest_OBJECTS = $(am_gctest_OBJECTS) +gctest_DEPENDENCIES = test.o ./libgc.la +gctest_LDFLAGS = + +DEFS = @DEFS@ +DEFAULT_INCLUDES = -I. -I$(srcdir) CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ -libgc_la_OBJECTS = allchblk.lo alloc.lo blacklst.lo checksums.lo \ -dbg_mlc.lo dyn_load.lo finalize.lo gc_dlopen.lo gcj_mlc.lo headers.lo \ -irix_threads.lo linux_threads.lo malloc.lo mallocx.lo mark.lo \ -mark_rts.lo misc.lo new_hblk.lo obj_map.lo os_dep.lo pcr_interface.lo \ -ptr_chck.lo real_malloc.lo reclaim.lo solaris_pthreads.lo \ -solaris_threads.lo specific.lo stubborn.lo typd_mlc.lo backgraph.lo -check_PROGRAMS = gctest$(EXEEXT) -gctest_DEPENDENCIES = ./libgc.la -gctest_LDFLAGS = -CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/allchblk.Plo ./$(DEPDIR)/alloc.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/backgraph.Plo ./$(DEPDIR)/blacklst.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/checksums.Plo ./$(DEPDIR)/dbg_mlc.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/dyn_load.Plo ./$(DEPDIR)/finalize.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/gc_dlopen.Plo ./$(DEPDIR)/gcj_mlc.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/headers.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/irix_threads.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/linux_threads.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/malloc.Plo ./$(DEPDIR)/mallocx.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/mark.Plo ./$(DEPDIR)/mark_rts.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/misc.Plo ./$(DEPDIR)/new_hblk.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/obj_map.Plo ./$(DEPDIR)/os_dep.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/pcr_interface.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/ptr_chck.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/real_malloc.Plo ./$(DEPDIR)/reclaim.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/solaris_pthreads.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/solaris_threads.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/specific.Plo ./$(DEPDIR)/stubborn.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/typd_mlc.Plo \ +@AMDEP_TRUE@ ./$(DEPDIR)/win32_threads.Plo +CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS) +LTCCASCOMPILE = $(LIBTOOL) --mode=compile $(CCAS) $(AM_CCASFLAGS) \ + $(CCASFLAGS) +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -DIST_COMMON = Makefile.am Makefile.in acinclude.m4 aclocal.m4 \ -config.guess config.sub configure configure.in install-sh ltconfig \ -ltmain.sh mkinstalldirs - - -DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +DIST_SOURCES = $(libgc_la_SOURCES) $(EXTRA_libgc_la_SOURCES) \ + $(gctest_SOURCES) +DIST_COMMON = Makefile.am Makefile.in acinclude.m4 aclocal.m4 \ + config.guess config.sub configure configure.in depcomp \ + install-sh ltconfig ltmain.sh missing mkinstalldirs +SOURCES = $(libgc_la_SOURCES) $(EXTRA_libgc_la_SOURCES) $(gctest_SOURCES) -TAR = gtar -GZIP_ENV = --best -SOURCES = $(libgc_la_SOURCES) $(EXTRA_libgc_la_SOURCES) -OBJECTS = $(libgc_la_OBJECTS) +all: all-am -all: all-redirect .SUFFIXES: -.SUFFIXES: .S .c .lo .o .s -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) - cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4 - cd $(srcdir) && $(ACLOCAL) - -config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) +.SUFFIXES: .S .c .lo .o .obj .s +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) + +$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck -$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) +$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) -mostlyclean-toolexeclibLTLIBRARIES: - -clean-toolexeclibLTLIBRARIES: - -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES) - -distclean-toolexeclibLTLIBRARIES: - -maintainer-clean-toolexeclibLTLIBRARIES: - -install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4 + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +libLTLIBRARIES_INSTALL = $(INSTALL) +install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) - $(mkinstalldirs) $(DESTDIR)$(toolexeclibdir) - @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ + $(mkinstalldirs) $(DESTDIR)$(libdir) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(toolexeclibdir)/$$p"; \ - $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(toolexeclibdir)/$$p; \ + f="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f"; \ + $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) $$p $(DESTDIR)$(libdir)/$$f; \ else :; fi; \ done -uninstall-toolexeclibLTLIBRARIES: +uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \ - $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(toolexeclibdir)/$$p; \ + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p="`echo $$p | sed -e 's|^.*/||'`"; \ + echo " $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p"; \ + $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ done -.c.o: - $(COMPILE) -c $< +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) +libgc.la: $(libgc_la_OBJECTS) $(libgc_la_DEPENDENCIES) + $(LINK) -rpath $(libdir) $(libgc_la_LDFLAGS) $(libgc_la_OBJECTS) $(libgc_la_LIBADD) $(LIBS) -.s.o: - $(COMPILE) -c $< - -.S.o: - $(COMPILE) -c $< +clean-checkPROGRAMS: + -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS) +gctest$(EXEEXT): $(gctest_OBJECTS) $(gctest_DEPENDENCIES) + @rm -f gctest$(EXEEXT) + $(LINK) $(gctest_LDFLAGS) $(gctest_OBJECTS) $(gctest_LDADD) $(LIBS) mostlyclean-compile: - -rm -f *.o core *.core - -clean-compile: + -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c -maintainer-clean-compile: +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/allchblk.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backgraph.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blacklst.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/checksums.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbg_mlc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyn_load.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/finalize.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc_dlopen.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gcj_mlc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/headers.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/irix_threads.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/linux_threads.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/malloc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mallocx.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark_rts.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/new_hblk.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obj_map.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_dep.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pcr_interface.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptr_chck.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/real_malloc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reclaim.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/solaris_pthreads.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/solaris_threads.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/specific.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stubborn.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/typd_mlc.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/win32_threads.Plo@am__quote@ + +distclean-depend: + -rm -rf ./$(DEPDIR) -.c.lo: - $(LIBTOOL) --mode=compile $(COMPILE) -c $< +.S.o: + $(CCASCOMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< + +.S.obj: + $(CCASCOMPILE) -c `cygpath -w $<` .S.lo: - $(LIBTOOL) --mode=compile $(COMPILE) -c $< + $(LTCCASCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< -mostlyclean-libtool: - -rm -f *.lo +.c.o: +@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< -clean-libtool: - -rm -rf .libs _libs +.c.obj: +@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + $(COMPILE) -c `cygpath -w $<` -distclean-libtool: - -maintainer-clean-libtool: +.c.lo: +@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ + $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< +CCDEPMODE = @CCDEPMODE@ -libgc.la: $(libgc_la_OBJECTS) $(libgc_la_DEPENDENCIES) - $(LINK) $(libgc_la_LDFLAGS) $(libgc_la_OBJECTS) $(libgc_la_LIBADD) $(LIBS) +.s.o: + $(CCASCOMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< -mostlyclean-checkPROGRAMS: +.s.obj: + $(CCASCOMPILE) -c `cygpath -w $<` -clean-checkPROGRAMS: - -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS) +mostlyclean-libtool: + -rm -f *.lo -distclean-checkPROGRAMS: +clean-libtool: + -rm -rf .libs _libs -maintainer-clean-checkPROGRAMS: +distclean-libtool: + -rm -f libtool +uninstall-info-am: -gctest$(EXEEXT): $(gctest_OBJECTS) $(gctest_DEPENDENCIES) - @rm -f gctest$(EXEEXT) - $(LINK) $(gctest_LDFLAGS) $(gctest_OBJECTS) $(gctest_LDADD) $(LIBS) +ETAGS = etags +ETAGSFLAGS = tags: TAGS -ID: $(HEADERS) $(SOURCES) $(LISP) - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - here=`pwd` && cd $(srcdir) \ - && mkid -f$$here/ID $$unique $(LISP) + mkid -fID $$unique -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ - list='$(SOURCES) $(HEADERS)'; \ - unique=`for i in $$list; do echo $$i; done | \ - awk ' { files[$$0] = 1; } \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ - test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ - || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + test -z "$(ETAGS_ARGS)$$tags$$unique" \ + || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique -mostlyclean-tags: - -clean-tags: +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here distclean-tags: - -rm -f TAGS ID - -maintainer-clean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH +check-TESTS: $(TESTS) + @failed=0; all=0; xfail=0; xpass=0; \ + srcdir=$(srcdir); export srcdir; \ + list='$(TESTS)'; \ + if test -n "$$list"; then \ + for tst in $$list; do \ + if test -f ./$$tst; then dir=./; \ + elif test -f $$tst; then dir=; \ + else dir="$(srcdir)/"; fi; \ + if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *" $$tst "*) \ + xpass=`expr $$xpass + 1`; \ + failed=`expr $$failed + 1`; \ + echo "XPASS: $$tst"; \ + ;; \ + *) \ + echo "PASS: $$tst"; \ + ;; \ + esac; \ + elif test $$? -ne 77; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *" $$tst "*) \ + xfail=`expr $$xfail + 1`; \ + echo "XFAIL: $$tst"; \ + ;; \ + *) \ + failed=`expr $$failed + 1`; \ + echo "FAIL: $$tst"; \ + ;; \ + esac; \ + fi; \ + done; \ + if test "$$failed" -eq 0; then \ + if test "$$xfail" -eq 0; then \ + banner="All $$all tests passed"; \ + else \ + banner="All $$all tests behaved as expected ($$xfail expected failures)"; \ + fi; \ + else \ + if test "$$xpass" -eq 0; then \ + banner="$$failed of $$all tests failed"; \ + else \ + banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \ + fi; \ + fi; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes"; \ + test "$$failed" -eq 0; \ + else :; fi +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = . distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) + +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } + +GZIP_ENV = --best +distcleancheck_listfiles = find . -type f -print + +distdir: $(DISTFILES) + $(am__remove_distdir) + mkdir $(distdir) + @for file in $(DISTFILES); do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist dist-all: distdir + $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist - -rm -rf $(distdir) - GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + $(am__remove_distdir) + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - + chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/=build mkdir $(distdir)/=inst - dc_install_base=`cd $(distdir)/=inst && pwd`; \ - cd $(distdir)/=build \ + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \ + && cd $(distdir)/=build \ && ../configure --srcdir=.. --prefix=$$dc_install_base \ + $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) dist - -rm -rf $(distdir) - @banner="$(distdir).tar.gz is ready for distribution"; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes" -dist: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -dist-all: distdir - -chmod -R a+r $(distdir) - GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) - -rm -rf $(distdir) -distdir: $(DISTFILES) - -rm -rf $(distdir) - mkdir $(distdir) - -chmod 777 $(distdir) - @for file in $(DISTFILES); do \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - cp -pr $$d/$$file $(distdir)/$$file; \ - else \ - test -f $(distdir)/$$file \ - || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ - || cp -p $$d/$$file $(distdir)/$$file || :; \ - fi; \ - done -check-TESTS: $(TESTS) - @failed=0; all=0; \ - srcdir=$(srcdir); export srcdir; \ - for tst in $(TESTS); do \ - if test -f $$tst; then dir=.; \ - else dir="$(srcdir)"; fi; \ - if $(TESTS_ENVIRONMENT) $$dir/$$tst; then \ - all=`expr $$all + 1`; \ - echo "PASS: $$tst"; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - failed=`expr $$failed + 1`; \ - echo "FAIL: $$tst"; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="$$failed of $$all tests failed"; \ - fi; \ - dashes=`echo "$$banner" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0 -info-am: -info: info-am -dvi-am: -dvi: dvi-am -check-am: $(check_PROGRAMS) + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + find $$dc_install_base -type f -print ; \ + exit 1; } >&2 ) \ + && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ + && rm -f $(distdir).tar.gz \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @echo "$(distdir).tar.gz is ready for distribution" | \ + sed 'h;s/./=/g;p;x;p;x' +distcleancheck: distclean + if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: check-am -installcheck-am: -installcheck: installcheck-am -install-info-am: -install-info: install-info-am -install-exec-am: install-toolexeclibLTLIBRARIES -install-exec: install-exec-am +all-am: Makefile $(LTLIBRARIES) -install-data-am: -install-data: install-data-am +installdirs: + $(mkinstalldirs) $(DESTDIR)$(libdir) -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am -uninstall-am: uninstall-toolexeclibLTLIBRARIES +install-exec: install-exec-am +install-data: install-data-am uninstall: uninstall-am -all-am: Makefile $(LTLIBRARIES) -all-redirect: all-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install -installdirs: - $(mkinstalldirs) $(DESTDIR)$(toolexeclibdir) +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log stamp-h stamp-h[0-9]* + -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* maintainer-clean-generic: -mostlyclean-am: mostlyclean-toolexeclibLTLIBRARIES mostlyclean-compile \ - mostlyclean-libtool mostlyclean-checkPROGRAMS \ - mostlyclean-tags mostlyclean-generic + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am -mostlyclean: mostlyclean-am +clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool mostlyclean-am -clean-am: clean-toolexeclibLTLIBRARIES clean-compile clean-libtool \ - clean-checkPROGRAMS clean-tags clean-generic \ - mostlyclean-am +distclean: distclean-am + -rm -f config.status config.cache config.log +distclean-am: clean-am distclean-compile distclean-depend \ + distclean-generic distclean-libtool distclean-tags -clean: clean-am +dvi: dvi-am -distclean-am: distclean-toolexeclibLTLIBRARIES distclean-compile \ - distclean-libtool distclean-checkPROGRAMS \ - distclean-tags distclean-generic clean-am - -rm -f libtool +dvi-am: -distclean: distclean-am - -rm -f config.status +info: info-am -maintainer-clean-am: maintainer-clean-toolexeclibLTLIBRARIES \ - maintainer-clean-compile maintainer-clean-libtool \ - maintainer-clean-checkPROGRAMS maintainer-clean-tags \ - maintainer-clean-generic distclean-am - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." +info-am: + +install-data-am: + +install-exec-am: install-libLTLIBRARIES + +install-info: install-info-am + +install-man: + +installcheck-am: maintainer-clean: maintainer-clean-am - -rm -f config.status - -.PHONY: mostlyclean-toolexeclibLTLIBRARIES \ -distclean-toolexeclibLTLIBRARIES clean-toolexeclibLTLIBRARIES \ -maintainer-clean-toolexeclibLTLIBRARIES \ -uninstall-toolexeclibLTLIBRARIES install-toolexeclibLTLIBRARIES \ -mostlyclean-compile distclean-compile clean-compile \ -maintainer-clean-compile mostlyclean-libtool distclean-libtool \ -clean-libtool maintainer-clean-libtool mostlyclean-checkPROGRAMS \ -distclean-checkPROGRAMS clean-checkPROGRAMS \ -maintainer-clean-checkPROGRAMS tags mostlyclean-tags distclean-tags \ -clean-tags maintainer-clean-tags distdir check-TESTS info-am info \ -dvi-am dvi check check-am installcheck-am installcheck install-info-am \ -install-info install-exec-am install-exec install-data-am install-data \ -install-am install uninstall-am uninstall all-redirect all-am all \ -installdirs mostlyclean-generic distclean-generic clean-generic \ -maintainer-clean-generic clean mostlyclean distclean maintainer-clean + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES + +.PHONY: GTAGS all all-am check check-TESTS check-am clean \ + clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ + clean-libtool dist dist-all dist-gzip distcheck distclean \ + distclean-compile distclean-depend distclean-generic \ + distclean-libtool distclean-tags distcleancheck distdir dvi \ + dvi-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-libLTLIBRARIES install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + tags uninstall uninstall-am uninstall-info-am \ + uninstall-libLTLIBRARIES # The following hack produces a warning from automake, but we need it in order # to build a file from a subdirectory. FIXME. -test.o: tests/test.c - $(COMPILE) -c tests/test.c +test.o: $(srcdir)/tests/test.c + $(COMPILE) -c $(srcdir)/tests/test.c $(all_objs) : include/private/gcconfig.h include/private/gc_priv.h \ include/private/gc_hdrs.h include/gc.h include/gc_gcj.h include/gc_mark.h .s.lo: $(LTCOMPILE) -Wp,-P -x assembler-with-cpp -c $< - -# Multilib support. -.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \ - maintainer-clean-multi - -all-am: all-multi -install-am: install-multi -mostlyclean-am: mostlyclean-multi -clean-am: clean-multi -distclean-am: distclean-multi -maintainer-clean-am: maintainer-clean-multi - -all-multi: - $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do -install-multi: - $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do -mostlyclean-multi: - $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean -clean-multi: - $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean -distclean-multi: - $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean -maintainer-clean-multi: - $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean - # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: |