diff options
Diffstat (limited to '')
| -rw-r--r-- | gc/libtool.m4 | 3398 |
1 files changed, 3268 insertions, 130 deletions
diff --git a/gc/libtool.m4 b/gc/libtool.m4 index c857149..066bf6a 100644 --- a/gc/libtool.m4 +++ b/gc/libtool.m4 @@ -1,5 +1,6 @@ -## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*- -## Copyright (C) 1996-1999 Free Software Foundation, Inc. +# libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- +## Copyright 1996, 1997, 1998, 1999, 2000, 2001 +## Free Software Foundation, Inc. ## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 ## ## This program is free software; you can redistribute it and/or modify @@ -21,85 +22,68 @@ ## configuration script generated by Autoconf, you may include it under ## the same distribution terms that you use for the rest of that program. -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl - -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE +# serial 46 AC_PROG_LIBTOOL -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ -|| AC_MSG_ERROR([libtool configure failed]) - -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) ]) -AC_DEFUN(AC_LIBTOOL_SETUP, +AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl dnl -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; +_LT_AC_PROG_ECHO_BACKSLASH +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; esac -# Check for any special flags to pass to ltconfig. -# -# the following will cause an existing older ltconfig to fail, so -# we ignore this at the expense of the cache file... Checking this -# will just take longer ... bummer! -#libtool_flags="--cache-file=$cache_file" -# -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) +enable_win32_dll=yes, enable_win32_dll=no) + AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -119,7 +103,10 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + [AC_LANG_SAVE + AC_LANG_C + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_RESTORE]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" @@ -127,33 +114,2889 @@ case "$lt_target" in ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one + AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, + [AC_TRY_LINK([], + [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); + DllMain (0, 0, 0);], + [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) + + case $host/$CC in + *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) + # old mingw systems require "-dll" to link a DLL, while more recent ones + # require "-mdll" + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -mdll" + AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, + [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) + CFLAGS="$SAVE_CFLAGS" ;; + *-*-cygwin* | *-*-pw32*) + # cygwin systems need to pass --dll to the linker, and not link + # crt.o which will require a WinMain@16 definition. + lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; + esac ;; + ]) +esac + +_LT_AC_LTCONFIG_HACK + ]) + +# AC_LIBTOOL_HEADER_ASSERT +# ------------------------ +AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], +[AC_CACHE_CHECK([whether $CC supports assert without backlinking], + [lt_cv_func_assert_works], + [case $host in + *-*-solaris*) + if test "$GCC" = yes && test "$with_gnu_ld" != yes; then + case `$CC --version 2>/dev/null` in + [[12]].*) lt_cv_func_assert_works=no ;; + *) lt_cv_func_assert_works=yes ;; + esac + fi + ;; + esac]) + +if test "x$lt_cv_func_assert_works" = xyes; then + AC_CHECK_HEADERS(assert.h) +fi +])# AC_LIBTOOL_HEADER_ASSERT + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h) +])# _LT_AC_CHECK_DLFCN + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) # Its linker distinguishes data from code symbols + lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix*) + symcode='[[BCDEGRST]]' + ;; +solaris* | sysv5*) + symcode='[[BDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $host_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + symcode='[[ABCDGISTW]]' +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. +lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + rm -f conftest* + cat > conftest.$ac_ext <<EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat <<EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + + cat <<EOF >> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr void * +#else +# define lt_ptr char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr address; +} +lt_preloaded_symbols[[]] = +{ +EOF + sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + save_LIBS="$LIBS" + save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if AC_TRY_EVAL(ac_link) && test -s conftest; then + pipe_works=yes + fi + LIBS="$save_LIBS" + CFLAGS="$save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AC_FD_CC + fi + else + echo "cannot find nm_test_var in $nlist" >&AC_FD_CC + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi + else + echo "$progname: failed program was:" >&AC_FD_CC + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" +if test -z "$lt_cv_sys_global_symbol_pipe"; then + global_symbol_to_cdecl= + global_symbol_to_c_name_address= +else + global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" + global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" +fi +if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; +then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + +# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR +# --------------------------------- +AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], +[# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) lt_cv_sys_path_separator=';' ;; + *) lt_cv_sys_path_separator=':' ;; + esac + PATH_SEPARATOR=$lt_cv_sys_path_separator +fi +])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<EOF +$* +EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string="`eval $cmd`") 2>/dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +AC_DIVERT_POP +])# _LT_AC_PROG_ECHO_BACKSLASH + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[if test "$cross_compiling" = yes; then : + [$4] +else + AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<EOF +[#line __oline__ "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include <dlfcn.h> +#endif + +#include <stdio.h> + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF + +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + cygwin* | mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + +AC_DEFUN([_LT_AC_LTCONFIG_HACK], +[AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" +need_locks="$enable_libtool_lock" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +if test x"$host" != x"$build"; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +case $host_os in +linux-gnu*) ;; +linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` esac + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" + ;; + *) + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="[$]2" + +## FIXME: this should be a separate macro +## +AC_MSG_CHECKING([for objdir]) +rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + objdir=_libs +fi +rmdir .libs 2>/dev/null +AC_MSG_RESULT($objdir) +## +## END FIXME + + +## FIXME: this should be a separate macro +## +AC_ARG_WITH(pic, +[ --with-pic try to use only PIC/non-PIC objects [default=use both]], +pic_mode="$withval", pic_mode=default) +test -z "$pic_mode" && pic_mode=default + +# We assume here that the value for lt_cv_prog_cc_pic will not be cached +# in isolation, and that seeing it set (from the cache) indicates that +# the associated values are set (in the cache) correctly too. +AC_MSG_CHECKING([for $compiler option to produce PIC]) +AC_CACHE_VAL(lt_cv_prog_cc_pic, +[ lt_cv_prog_cc_pic= + lt_cv_prog_cc_shlib= + lt_cv_prog_cc_wl= + lt_cv_prog_cc_static= + lt_cv_prog_cc_no_builtin= + lt_cv_prog_cc_can_build_shared=$can_build_shared + + if test "$GCC" = yes; then + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-static' + + case $host_os in + aix*) + # Below there is a dirty hack to force normal static linking with -ldl + # The problem is because libdl dynamically linked with both libc and + # libC (AIX C++ library), which obviously doesn't included in libraries + # list by gcc. This cause undefined symbols with -static flags. + # This hack allows C programs to be linked with "-static -ldl", but + # not sure about C++ programs. + lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_cv_prog_cc_pic='-fno-common' + ;; + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_cv_prog_cc_pic=-Kconform_pic + fi + ;; + *) + lt_cv_prog_cc_pic='-fPIC' + ;; + esac + else + # PORTME Check for PIC flags for the system compiler. + case $host_os in + aix3* | aix4* | aix5*) + lt_cv_prog_cc_wl='-Wl,' + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_cv_prog_cc_static='-Bstatic' + else + lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + hpux9* | hpux10* | hpux11*) + # Is there a better lt_cv_prog_cc_static that works with the bundled CC? + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" + lt_cv_prog_cc_pic='+Z' + ;; + + irix5* | irix6*) + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + # PIC (with -KPIC) is the default. + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_cv_prog_cc_pic='-DDLL_EXPORT' + ;; + + newsos6) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + ;; + + osf3* | osf4* | osf5*) + # All OSF/1 code is PIC. + lt_cv_prog_cc_wl='-Wl,' + lt_cv_prog_cc_static='-non_shared' + ;; + + sco3.2v5*) + lt_cv_prog_cc_pic='-Kpic' + lt_cv_prog_cc_static='-dn' + lt_cv_prog_cc_shlib='-belf' + ;; + + solaris*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Wl,' + ;; + + sunos4*) + lt_cv_prog_cc_pic='-PIC' + lt_cv_prog_cc_static='-Bstatic' + lt_cv_prog_cc_wl='-Qoption ld ' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + lt_cv_prog_cc_pic='-KPIC' + lt_cv_prog_cc_static='-Bstatic' + if test "x$host_vendor" = xsni; then + lt_cv_prog_cc_wl='-LD' + else + lt_cv_prog_cc_wl='-Wl,' + fi + ;; + + uts4*) + lt_cv_prog_cc_pic='-pic' + lt_cv_prog_cc_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_cv_prog_cc_pic='-Kconform_pic' + lt_cv_prog_cc_static='-Bstatic' + fi + ;; + + *) + lt_cv_prog_cc_can_build_shared=no + ;; + esac + fi +]) +if test -z "$lt_cv_prog_cc_pic"; then + AC_MSG_RESULT([none]) +else + AC_MSG_RESULT([$lt_cv_prog_cc_pic]) + + # Check to make sure the pic_flag actually works. + AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) + AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" + AC_TRY_COMPILE([], [], [dnl + case $host_os in + hpux9* | hpux10* | hpux11*) + # On HP-UX, both CC and GCC only warn that PIC is supported... then + # they create non-PIC objects. So, if there were any warnings, we + # assume that PIC is not supported. + if test -s conftest.err; then + lt_cv_prog_cc_pic_works=no + else + lt_cv_prog_cc_pic_works=yes + fi + ;; + *) + lt_cv_prog_cc_pic_works=yes + ;; + esac + ], [dnl + lt_cv_prog_cc_pic_works=no + ]) + CFLAGS="$save_CFLAGS" + ]) + + if test "X$lt_cv_prog_cc_pic_works" = Xno; then + lt_cv_prog_cc_pic= + lt_cv_prog_cc_can_build_shared=no + else + lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" + fi + + AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) +fi +## +## END FIXME + +# Check for any special shared library compilation flags. +if test -n "$lt_cv_prog_cc_shlib"; then + AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : + else + AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) + lt_cv_prog_cc_can_build_shared=no + fi +fi + +## FIXME: this should be a separate macro +## +AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) +AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl + lt_cv_prog_cc_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" + AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) + LDFLAGS="$save_LDFLAGS" ]) +# Belt *and* braces to stop my trousers falling down: +test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= +AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) + +pic_flag="$lt_cv_prog_cc_pic" +special_shlib_compile_flags="$lt_cv_prog_cc_shlib" +wl="$lt_cv_prog_cc_wl" +link_static_flag="$lt_cv_prog_cc_static" +no_builtin_flag="$lt_cv_prog_cc_no_builtin" +can_build_shared="$lt_cv_prog_cc_can_build_shared" +## +## END FIXME + + +## FIXME: this should be a separate macro +## +# Check to see if options -o and -c are simultaneously supported by compiler +AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) +AC_CACHE_VAL([lt_cv_compiler_c_o], [ +$rm -r conftest 2>/dev/null +mkdir conftest +cd conftest +echo "int some_variable = 0;" > conftest.$ac_ext +mkdir out +# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +# that will create temporary files in the current directory regardless of +# the output directory. Thus, making CWD read-only will cause this test +# to fail, enabling locking or at least warning the user not to do parallel +# builds. +chmod -w . +save_CFLAGS="$CFLAGS" +CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" +compiler_c_o=no +if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + lt_cv_compiler_c_o=no + else + lt_cv_compiler_c_o=yes + fi +else + # Append any errors to the config.log. + cat out/conftest.err 1>&AC_FD_CC + lt_cv_compiler_c_o=no +fi +CFLAGS="$save_CFLAGS" +chmod u+w . +$rm conftest* out/* +rmdir out +cd .. +rmdir conftest +$rm -r conftest 2>/dev/null +]) +compiler_c_o=$lt_cv_compiler_c_o +AC_MSG_RESULT([$compiler_c_o]) + +if test x"$compiler_c_o" = x"yes"; then + # Check to see if we can write to a .lo + AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) + AC_CACHE_VAL([lt_cv_compiler_o_lo], [ + lt_cv_compiler_o_lo=no + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -c -o conftest.lo" + save_objext="$ac_objext" + ac_objext=lo + AC_TRY_COMPILE([], [int some_variable = 0;], [dnl + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + lt_cv_compiler_o_lo=no + else + lt_cv_compiler_o_lo=yes + fi + ]) + ac_objext="$save_objext" + CFLAGS="$save_CFLAGS" + ]) + compiler_o_lo=$lt_cv_compiler_o_lo + AC_MSG_RESULT([$compiler_o_lo]) +else + compiler_o_lo=no +fi +## +## END FIXME + +## FIXME: this should be a separate macro +## +# Check to see if we can do hard links to lock some files if needed +hard_links="nottested" +if test "$compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +## +## END FIXME + +## FIXME: this should be a separate macro +## +if test "$GCC" = yes; then + # Check to see if options -fno-rtti -fno-exceptions are supported by compiler + AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) + echo "int some_variable = 0;" > conftest.$ac_ext + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" + compiler_rtti_exceptions=no + AC_TRY_COMPILE([], [int some_variable = 0;], [dnl + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + compiler_rtti_exceptions=no + else + compiler_rtti_exceptions=yes + fi + ]) + CFLAGS="$save_CFLAGS" + AC_MSG_RESULT([$compiler_rtti_exceptions]) + + if test "$compiler_rtti_exceptions" = "yes"; then + no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' + else + no_builtin_flag=' -fno-builtin' + fi +fi +## +## END FIXME + +## FIXME: this should be a separate macro +## +# See if the linker supports building shared libraries. +AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) + +allow_undefined_flag= +no_undefined_flag= +need_lib_prefix=unknown +need_version=unknown +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +archive_cmds= +archive_expsym_cmds= +old_archive_from_new_cmds= +old_archive_from_expsyms_cmds= +export_dynamic_flag_spec= +whole_archive_flag_spec= +thread_safe_flag_spec= +hardcode_into_libs=no +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no +hardcode_shlibpath_var=unsupported +runpath_var= +link_all_deplibs=unknown +always_export_symbols=no +export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +# include_expsyms should be a list of space-separated symbols to be *always* +# included in the symbol list +include_expsyms= +# exclude_expsyms can be an egrep regular expression of symbols to exclude +# it will be wrapped by ` (' and `)$', so one must not match beginning or +# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +# as well as any symbol that contains `d'. +exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +# platforms (ab)use it in PIC code, but their linkers get confused if +# the symbol is explicitly referenced. Since portable code cannot +# rely on this symbol name, it's probably fine to never include it in +# preloaded symbol tables. +extract_expsyms_cmds= + +case $host_os in +cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; +openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX, the GNU linker is very broken + # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. + ld_shlibs=no + cat <<EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach <jrb3@best.com> says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=yes + + extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ + sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ + test -f $output_objdir/impgen.exe || (cd $output_objdir && \ + if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ + else $CC -o impgen impgen.c ; fi)~ + $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' + + old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' + + # cygwin and mingw dlls have different entry points and sets of symbols + # to exclude. + # FIXME: what about values for MSVC? + dll_entry=__cygwin_dll_entry@12 + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + case $host_os in + mingw*) + # mingw values + dll_entry=_DllMainCRTStartup@12 + dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + ;; + esac + + # mingw and cygwin differ, and it's simplest to just exclude the union + # of the two symbol sets. + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one (in ltdll.c) + if test "x$lt_cv_need_dllmain" = "xyes"; then + ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " + ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ + test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' + else + ltdll_obj= + ltdll_cmds= + fi + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + # Be careful not to strip the DATA tag left be newer dlltools. + export_symbols_cmds="$ltdll_cmds"' + $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ + sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' + + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is. + # If DATA tags from a recent dlltool are present, honour them! + archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname-def; + else + echo EXPORTS > $output_objdir/$soname-def; + _lt_hint=1; + cat $export_symbols | while read symbol; do + set dummy \$symbol; + case \[$]# in + 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; + *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; + esac; + _lt_hint=`expr 1 + \$_lt_hint`; + done; + fi~ + '"$ltdll_cmds"' + $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ + $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ + $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = yes; then + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw* | pw32*) + # dlltool doesn't understand --whole-archive et. al. + whole_archive_flag_spec= + ;; + *) + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + ;; + esac + fi +else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + hardcode_direct=yes + archive_cmds='' + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + shared_flag='${wl}-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall can do strange things, so it is better to + # generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='${wl}-berok' + # This is a bit strange, but is similar to how AIX traditionally builds + # it's shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + ;; + + darwin* | rhapsody*) + case "$host_os" in + rhapsody* | darwin1.[[012]]) + allow_undefined_flag='-undefined suppress' + ;; + *) # Darwin 1.3 on + allow_undefined_flag='-flat_namespace -undefined suppress' + ;; + esac + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' + # We need to add '_' to the symbols in $export_symbols first + #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' + hardcode_direct=yes + hardcode_shlibpath_var=no + whole_archive_flag_spec='-all_load $convenience' + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9* | hpux10* | hpux11*) + case $host_os in + hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; + *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; + esac + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_minus_L=yes # Not in the search PATH, but as the default + # location of the library. + export_dynamic_flag_spec='${wl}-E' + ;; + + irix5* | irix6*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case "$host_os" in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + #Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + sco3.2v5*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + export_dynamic_flag_spec='${wl}-Bexport' + ;; + + solaris*) + # gcc --version < 3.0 without binutils cannot create self contained + # shared libraries reliably, requiring libgcc.a to resolve some of + # the object symbols generated in some cases. Libraries that use + # assert need libgcc.a to resolve __eprintf, for example. Linking + # a copy of libgcc.a into every shared library to guarantee resolving + # such symbols causes other problems: According to Tim Van Holder + # <tim.van.holder@pandora.be>, C++ libraries end up with a separate + # (to the application) exception stack for one thing. + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + case `$CC --version 2>/dev/null` in + [[12]].*) + cat <<EOF 1>&2 + +*** Warning: Releases of GCC earlier than version 3.0 cannot reliably +*** create self contained shared libraries on Solaris systems, without +*** introducing a dependency on libgcc.a. Therefore, libtool is disabling +*** -no-undefined support, which will at least allow you to build shared +*** libraries. However, you may find that when you link such libraries +*** into an application without using GCC, you have to manually add +*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to +*** upgrade to a newer version of GCC. Another option is to rebuild your +*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + +EOF + no_undefined_flag= + ;; + esac + fi + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + if test "x$host_vendor" = xsno; then + archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + else + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv5*) + no_undefined_flag=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + hardcode_libdir_flag_spec= + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4.2uw2*) + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=no + hardcode_shlibpath_var=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5uw7* | unixware7*) + no_undefined_flag='${wl}-z ${wl}text' + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac +fi +AC_MSG_RESULT([$ld_shlibs]) +test "$ld_shlibs" = no && can_build_shared=no +## +## END FIXME + +## FIXME: this should be a separate macro +## +# Check hardcoding attributes. +AC_MSG_CHECKING([how to hardcode library paths into programs]) +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var"; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$hardcode_shlibpath_var" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +AC_MSG_RESULT([$hardcode_action]) +## +## END FIXME + +## FIXME: this should be a separate macro +## +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else + AC_MSG_RESULT([no]) +fi +## +## END FIXME + +reload_cmds='$LD$reload_flag -o $output$reload_objs' +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +## FIXME: this should be a separate macro +## +# PORTME Fill in your ld.so characteristics +AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +aix4* | aix5*) + version_type=linux + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can + # not hardcode correct soname into executable. Probably we can + # add versioning support to collect2, so additional links can + # be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib<name>.so + # instead of lib<name>.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}.so$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + need_version=no + need_lib_prefix=no + case $GCC,$host_os in + yes,cygwin*) + library_names_spec='$libname.dll.a' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' + postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog .libs/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + ;; + yes,mingw*) + library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` + ;; + yes,pw32*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + ;; + *) + library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' + soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + *) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6*) + version_type=irix + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + case $host_os in + irix5*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux-gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case "$host_os" in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + ;; + +os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_version=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +## +## END FIXME + +## FIXME: this should be a separate macro +## +# Report the final consequences. +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) +## +## END FIXME + +## FIXME: this should be a separate macro +## +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +AC_MSG_RESULT([$enable_shared]) +## +## END FIXME + +## FIXME: this should be a separate macro +## +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) +## +## END FIXME + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +AC_LIBTOOL_DLOPEN_SELF + +## FIXME: this should be a separate macro +## +if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], + [$rm conftest* + echo 'static int dummy;' > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile); then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_cv_prog_cc_wl + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_archive_cmds_need_lc=no + else + lt_cv_archive_cmds_need_lc=yes + fi + allow_undefined_flag=$save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi]) + AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) + ;; + esac +fi +need_lc=${lt_cv_archive_cmds_need_lc-yes} +## +## END FIXME + +## FIXME: this should be a separate macro +## +# The second clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + : +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi + +if test -f "$ltmain"; then + trap "$rm \"${ofile}T\"; exit 1" 1 2 15 + $rm -f "${ofile}T" + + echo creating $ofile + + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS \ + AR AR_FLAGS CC LD LN_S NM SHELL \ + reload_flag reload_cmds wl \ + pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ + thread_safe_flag_spec whole_archive_flag_spec libname_spec \ + library_names_spec soname_spec \ + RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ + old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ + postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ + old_striplib striplib file_magic_cmd export_symbols_cmds \ + deplibs_check_method allow_undefined_flag no_undefined_flag \ + finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ + global_symbol_to_c_name_address \ + hardcode_libdir_flag_spec hardcode_libdir_separator \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do + + case $var in + reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ + extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + cat <<__EOF__ > "${ofile}T" +#! $SHELL + +# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996-2000 Free Software Foundation, Inc. +# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$need_lc + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# The default C compiler. +CC=$lt_CC + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_pic_flag +pic_mode=$pic_mode + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_compiler_c_o + +# Can we write directly to a .lo ? +compiler_o_lo=$lt_compiler_o_lo + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_link_static_flag + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$fix_srcfile_path" + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + case $host_os in + aix3*) + cat <<\EOF >> "${ofile}T" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + case $host_os in + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "${ofile}T" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments +# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include <windows.h> +# #undef WIN32_LEAN_AND_MEAN +# #include <stdio.h> +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include <cygwin/cygwin_dll.h> +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments +# /* impgen.c starts here */ +# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include <stdio.h> /* for printf() */ +# #include <unistd.h> /* for open(), lseek(), read() */ +# #include <fcntl.h> /* for O_RDONLY, O_BINARY */ +# #include <string.h> /* for strdup() */ +# +# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +# #ifndef O_BINARY +# #define O_BINARY 0 +# #endif +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (dll < 1) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i<nexp; i++) +# { +# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4); +# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i); +# } +# +# return 0; +# } +# /* impgen.c ends here */ + +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + + mv -f "${ofile}T" "$ofile" || \ + (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") + chmod +x "$ofile" +fi +## +## END FIXME + +])# _LT_AC_LTCONFIG_HACK + # AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) +AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_SHARED], +[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) @@ -172,21 +3015,22 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_STATIC], +[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) @@ -205,7 +3049,8 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) @@ -213,14 +3058,14 @@ AC_ENABLE_STATIC(no)]) # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) @@ -238,29 +3083,120 @@ esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) +# AC_LIBTOOL_PICMODE - implement the --with-pic flag +# Usage: AC_LIBTOOL_PICMODE[(MODE)] +# Where MODE is either `yes' or `no'. If omitted, it defaults to +# `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default)]) + + +# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <<EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +]) + + +# AC_PATH_MAGIC - find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl +AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) + else + MAGIC_CMD=: + fi +fi +]) + + # AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, +AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then +if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl + [[\\/]]* | [[A-Za-z]]:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do @@ -282,17 +3218,17 @@ elif test "$with_gnu_ld" = yes; then else AC_MSG_CHECKING([for non-GNU ld]) fi -AC_CACHE_VAL(ac_cv_path_LD, +AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" + lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break @@ -301,9 +3237,9 @@ AC_CACHE_VAL(ac_cv_path_LD, done IFS="$ac_save_ifs" else - ac_cv_path_LD="$LD" # Let the user override the test with a path. + lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) -LD="$ac_cv_path_LD" +LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else @@ -313,56 +3249,252 @@ test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, +# AC_PROG_LD_GNU - +AC_DEFUN([AC_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then - ac_cv_prog_gnu_ld=yes + lt_cv_prog_gnu_ld=yes else - ac_cv_prog_gnu_ld=no + lt_cv_prog_gnu_ld=no fi]) +with_gnu_ld=$lt_cv_prog_gnu_ld ]) +# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker +# -- PORTME Some linkers may need a different reload flag. +AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], +[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, +[lt_cv_ld_reload_flag='-r']) +reload_flag=$lt_cv_ld_reload_flag +test -n "$reload_flag" && reload_flag=" $reload_flag" +]) + +# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], +[AC_CACHE_CHECK([how to recognise dependant libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin* | mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[[012]]) + lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + +freebsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + +irix5* | irix6*) + case $host_os in + irix5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux-gnu*) + case $host_cpu in + alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +openbsd*) + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' + else + lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv5uw[[78]]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + esac + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +]) + + # AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, +AC_DEFUN([AC_PROG_NM], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +AC_MSG_CHECKING([for BSD-compatible nm]) +AC_CACHE_VAL(lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. - ac_cv_path_NM="$NM" + lt_cv_path_NM="$NM" else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" break else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) -NM="$ac_cv_path_NM" +NM="$lt_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, +AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= -case "$lt_target" in -*-*-beos* | *-*-cygwin*) +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) @@ -376,33 +3508,39 @@ esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library, adds --enable-ltdl-convenience to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in +# the libltdl convenience library and INCLTDL to the include flags for +# the libltdl header and adds --enable-ltdl-convenience to the +# configure arguments. Note that LIBLTDL and INCLTDL are not +# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not +# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed +# with '${top_builddir}/' and INCLTDL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac - LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la - INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library, and adds --enable-ltdl-install to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. +# the libltdl installable library and INCLTDL to the include flags for +# the libltdl header and adds --enable-ltdl-install to the configure +# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is +# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed +# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed +# with '${top_srcdir}/' (note the single quotes!). If your package is +# not flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then @@ -413,8 +3551,8 @@ AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la - INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" @@ -422,14 +3560,14 @@ AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl fi ]) -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl - -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl +# old names +AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) +AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) +AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) +AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) +AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) + +# This is just to silence aclocal about the macro not being used +ifelse([AC_DISABLE_FAST_INSTALL]) |