aboutsummaryrefslogtreecommitdiffstats
path: root/gc/mach_dep.c
diff options
context:
space:
mode:
Diffstat (limited to 'gc/mach_dep.c')
-rw-r--r--gc/mach_dep.c232
1 files changed, 176 insertions, 56 deletions
diff --git a/gc/mach_dep.c b/gc/mach_dep.c
index 756adb3..776bf69 100644
--- a/gc/mach_dep.c
+++ b/gc/mach_dep.c
@@ -12,7 +12,7 @@
* modified is included with the above copyright notice.
*/
/* Boehm, November 17, 1995 12:13 pm PST */
-# include "gc_priv.h"
+# include "private/gc_priv.h"
# include <stdio.h>
# include <setjmp.h>
# if defined(OS2) || defined(CX_UX)
@@ -21,7 +21,7 @@
# endif
# ifdef AMIGA
# ifndef __GNUC__
-# include <dos/dos.h>
+# include <dos.h>
# else
# include <machine/reg.h>
# endif
@@ -62,6 +62,12 @@ asm static void PushMacRegisters()
#endif /* __MWERKS__ */
+# if defined(SPARC) || defined(IA64)
+ /* Value returned from register flushing routine; either sp (SPARC) */
+ /* or ar.bsp (IA64) */
+ word GC_save_regs_ret_val;
+# endif
+
/* Routine to mark from registers that are preserved by the C compiler. */
/* This must be ported to every new architecture. There is a generic */
/* version at the end, that is likely, but not guaranteed to work */
@@ -74,21 +80,24 @@ void GC_push_regs()
# ifdef RT
register long TMP_SP; /* must be bound to r11 */
# endif
+
# if defined(MIPS) && defined(LINUX)
+ /* I'm not sure whether this has actually been tested. */
# define call_push(x) asm("move $4," x ";"); asm("jal GC_push_one")
- call_push("$2");
- call_push("$3");
- call_push("$16");
- call_push("$17");
- call_push("$18");
- call_push("$19");
- call_push("$20");
- call_push("$21");
- call_push("$22");
- call_push("$23");
- call_push("$30");
+ call_push("$2");
+ call_push("$3");
+ call_push("$16");
+ call_push("$17");
+ call_push("$18");
+ call_push("$19");
+ call_push("$20");
+ call_push("$21");
+ call_push("$22");
+ call_push("$23");
+ call_push("$30");
# undef call_push
-# endif // MIPS && LINUX
+# endif /* MIPS && LINUX */
+
# ifdef VAX
/* VAX - generic code below does not work under 4.2 */
/* r1 through r5 are caller save, and therefore */
@@ -169,7 +178,10 @@ void GC_push_regs()
# else /* !__GNUC__ */
GC_push_one(getreg(REG_A2));
GC_push_one(getreg(REG_A3));
- GC_push_one(getreg(REG_A4));
+# ifndef __SASC
+ /* Can probably be changed to #if 0 -Kjetil M. (a4=globals)*/
+ GC_push_one(getreg(REG_A4));
+# endif
GC_push_one(getreg(REG_A5));
GC_push_one(getreg(REG_A6));
/* Skip stack pointer */
@@ -208,11 +220,15 @@ void GC_push_regs()
# endif /* __MWERKS__ */
# endif /* MACOS */
-# if defined(I386) &&!defined(OS2) &&!defined(SVR4) &&!defined(MSWIN32) \
+# if defined(I386) &&!defined(OS2) &&!defined(SVR4) \
+ && (defined(__MINGW32__) || !defined(MSWIN32)) \
&& !defined(SCO) && !defined(SCO_ELF) \
- && !(defined(LINUX) && defined(__ELF__)) \
- && !(defined(__FreeBSD__) && defined(__ELF__)) \
- && !defined(DOS4GW)
+ && !(defined(LINUX) && defined(__ELF__)) \
+ && !(defined(FREEBSD) && defined(__ELF__)) \
+ && !(defined(NETBSD) && defined(__ELF__)) \
+ && !(defined(OPENBSD) && defined(__ELF__)) \
+ && !(defined(BEOS) && defined(__ELF__)) \
+ && !defined(DOS4GW) && !defined(HURD)
/* I386 code, generic code does not appear to work */
/* It does appear to work under OS2, and asms dont */
/* This is used for some 38g UNIX variants and for CYGWIN32 */
@@ -226,20 +242,39 @@ void GC_push_regs()
# endif
# if ( defined(I386) && defined(LINUX) && defined(__ELF__) ) \
- || ( defined(I386) && defined(__FreeBSD__) && defined(__ELF__) )
+ || ( defined(I386) && defined(FREEBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(NETBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(OPENBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(HURD) && defined(__ELF__) )
/* This is modified for Linux with ELF (Note: _ELF_ only) */
/* This section handles FreeBSD with ELF. */
- asm("pushl %eax"); asm("call GC_push_one"); asm("addl $4,%esp");
- asm("pushl %ecx"); asm("call GC_push_one"); asm("addl $4,%esp");
- asm("pushl %edx"); asm("call GC_push_one"); asm("addl $4,%esp");
- asm("pushl %ebp"); asm("call GC_push_one"); asm("addl $4,%esp");
- asm("pushl %esi"); asm("call GC_push_one"); asm("addl $4,%esp");
- asm("pushl %edi"); asm("call GC_push_one"); asm("addl $4,%esp");
- asm("pushl %ebx"); asm("call GC_push_one"); asm("addl $4,%esp");
+ /* Eax is caller-save and dead here. Other caller-save */
+ /* registers could also be skipped. We assume there are no */
+ /* pointers in MMX registers, etc. */
+ /* We combine instructions in a single asm to prevent gcc from */
+ /* inserting code in the middle. */
+ asm("pushl %ecx; call GC_push_one; addl $4,%esp");
+ asm("pushl %edx; call GC_push_one; addl $4,%esp");
+ asm("pushl %ebp; call GC_push_one; addl $4,%esp");
+ asm("pushl %esi; call GC_push_one; addl $4,%esp");
+ asm("pushl %edi; call GC_push_one; addl $4,%esp");
+ asm("pushl %ebx; call GC_push_one; addl $4,%esp");
# endif
-# if defined(I386) && defined(MSWIN32) && !defined(USE_GENERIC)
+# if ( defined(I386) && defined(BEOS) && defined(__ELF__) )
+ /* As far as I can understand from */
+ /* http://www.beunited.org/articles/jbq/nasm.shtml, */
+ /* only ebp, esi, edi and ebx are not scratch. How MMX */
+ /* etc. registers should be treated, I have no idea. */
+ asm("pushl %ebp; call GC_push_one; addl $4,%esp");
+ asm("pushl %esi; call GC_push_one; addl $4,%esp");
+ asm("pushl %edi; call GC_push_one; addl $4,%esp");
+ asm("pushl %ebx; call GC_push_one; addl $4,%esp");
+# endif
+
+# if defined(I386) && defined(MSWIN32) && !defined(__MINGW32__) \
+ && !defined(USE_GENERIC)
/* I386 code, Microsoft variant */
__asm push eax
__asm call GC_push_one
@@ -283,12 +318,11 @@ void GC_push_regs()
asm ("movd r7, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
# endif
-# ifdef SPARC
+# if defined(SPARC)
{
word GC_save_regs_in_stack();
- /* generic code will not work */
- (void)GC_save_regs_in_stack();
+ GC_save_regs_ret_val = GC_save_regs_in_stack();
}
# endif
@@ -348,14 +382,22 @@ void GC_push_regs()
# endif /* !__GNUC__ */
# endif /* M68K/SYSV */
+# if defined(PJ)
+ {
+ register int * sp asm ("optop");
+ extern int *__libc_stack_end;
+
+ GC_push_all_stack (sp, __libc_stack_end);
+ }
+# endif
/* other machines... */
-# if !(defined M68K) && !(defined VAX) && !(defined RT)
-# if !(defined SPARC) && !(defined I386) && !(defined NS32K)
-# if !defined(POWERPC) && !defined(UTS4)
-# if (!defined(MIPS) && !defined(LINUX))
+# if !defined(M68K) && !defined(VAX) && !defined(RT)
+# if !defined(SPARC) && !defined(I386) && !defined(NS32K)
+# if !defined(POWERPC) && !defined(UTS4)
+# if !defined(PJ) && !(defined(MIPS) && defined(LINUX))
--> bad news <--
-# endif
+# endif
# endif
# endif
# endif
@@ -366,25 +408,51 @@ void GC_push_regs()
void GC_generic_push_regs(cold_gc_frame)
ptr_t cold_gc_frame;
{
- /* Generic code */
- /* The idea is due to Parag Patel at HP. */
- /* We're not sure whether he would like */
- /* to be he acknowledged for it or not. */
{
- static jmp_buf regs;
- register word * i = (word *) regs;
- register ptr_t lim = (ptr_t)(regs) + (sizeof regs);
-
- /* Setjmp on Sun 3s doesn't clear all of the buffer. */
- /* That tends to preserve garbage. Clear it. */
+# ifdef HAVE_BUILTIN_UNWIND_INIT
+ /* This was suggested by Richard Henderson as the way to */
+ /* force callee-save registers and register windows onto */
+ /* the stack. */
+ __builtin_unwind_init();
+# else /* !HAVE_BUILTIN_UNWIND_INIT */
+ /* Generic code */
+ /* The idea is due to Parag Patel at HP. */
+ /* We're not sure whether he would like */
+ /* to be he acknowledged for it or not. */
+ jmp_buf regs;
+ register word * i = (word *) regs;
+ register ptr_t lim = (ptr_t)(regs) + (sizeof regs);
+
+ /* Setjmp doesn't always clear all of the buffer. */
+ /* That tends to preserve garbage. Clear it. */
for (; (char *)i < lim; i++) {
*i = 0;
}
-# if defined(POWERPC) || defined(MSWIN32) || defined(UTS4)
- (void) setjmp(regs);
-# else
- (void) _setjmp(regs);
-# endif
+# if defined(POWERPC) || defined(MSWIN32) || defined(MSWINCE) \
+ || defined(UTS4) || defined(LINUX)
+ (void) setjmp(regs);
+# else
+ (void) _setjmp(regs);
+# endif
+# endif /* !HAVE_BUILTIN_UNWIND_INIT */
+# if (defined(SPARC) && !defined(HAVE_BUILTIN_UNWIND_INIT)) \
+ || defined(IA64)
+ /* On a register window machine, we need to save register */
+ /* contents on the stack for this to work. The setjmp */
+ /* is probably not needed on SPARC, since pointers are */
+ /* only stored in windowed or scratch registers. It is */
+ /* needed on IA64, since some non-windowed registers are */
+ /* preserved. */
+ {
+ word GC_save_regs_in_stack();
+
+ GC_save_regs_ret_val = GC_save_regs_in_stack();
+ /* On IA64 gcc, could use __builtin_ia64_flushrs() and */
+ /* __builtin_ia64_flushrs(). The latter will be done */
+ /* implicitly by __builtin_unwind_init() for gcc3.0.1 */
+ /* and later. */
+ }
+# endif
GC_push_current_stack(cold_gc_frame);
}
}
@@ -402,10 +470,16 @@ ptr_t cold_gc_frame;
asm(" .globl _GC_save_regs_in_stack");
asm("_GC_save_regs_in_stack:");
# endif
- asm(" ta 0x3 ! ST_FLUSH_WINDOWS");
- asm(" mov %sp,%o0");
- asm(" retl");
- asm(" nop");
+# if defined(__arch64__) || defined(__sparcv9)
+ asm(" save %sp,-128,%sp");
+ asm(" flushw");
+ asm(" ret");
+ asm(" restore %sp,2047+128,%o0");
+# else
+ asm(" ta 0x3 ! ST_FLUSH_WINDOWS");
+ asm(" retl");
+ asm(" mov %sp,%o0");
+# endif
# ifdef SVR4
asm(" .GC_save_regs_in_stack_end:");
asm(" .size GC_save_regs_in_stack,.GC_save_regs_in_stack_end-GC_save_regs_in_stack");
@@ -415,12 +489,42 @@ ptr_t cold_gc_frame;
# endif
# endif
+/* On IA64, we also need to flush register windows. But they end */
+/* up on the other side of the stack segment. */
+/* Returns the backing store pointer for the register stack. */
+# ifdef IA64
+# ifdef __GNUC__
+ asm(" .text");
+ asm(" .psr abi64");
+ asm(" .psr lsb");
+ asm(" .lsb");
+ asm("");
+ asm(" .text");
+ asm(" .align 16");
+ asm(" .global GC_save_regs_in_stack");
+ asm(" .proc GC_save_regs_in_stack");
+ asm("GC_save_regs_in_stack:");
+ asm(" .body");
+ asm(" flushrs");
+ asm(" ;;");
+ asm(" mov r8=ar.bsp");
+ asm(" br.ret.sptk.few rp");
+ asm(" .endp GC_save_regs_in_stack");
+# else
+ void GC_save_regs_in_stack() {
+ asm(" flushrs");
+ asm(" ;;");
+ asm(" mov r8=ar.bsp");
+ asm(" br.ret.sptk.few rp");
+ }
+# endif
+# endif
/* GC_clear_stack_inner(arg, limit) clears stack area up to limit and */
/* returns arg. Stack clearing is crucial on SPARC, so we supply */
/* an assembly version that's more careful. Assumes limit is hotter */
/* than sp, and limit is 8 byte aligned. */
-#if defined(ASM_CLEAR_CODE) && !defined(THREADS)
+#if defined(ASM_CLEAR_CODE)
#ifndef SPARC
--> fix it
#endif
@@ -432,6 +536,21 @@ ptr_t cold_gc_frame;
asm("GC_clear_stack_inner:");
asm(".type GC_save_regs_in_stack,#function");
# endif
+#if defined(__arch64__) || defined(__sparcv9)
+ asm("mov %sp,%o2"); /* Save sp */
+ asm("add %sp,2047-8,%o3"); /* p = sp+bias-8 */
+ asm("add %o1,-2047-192,%sp"); /* Move sp out of the way, */
+ /* so that traps still work. */
+ /* Includes some extra words */
+ /* so we can be sloppy below. */
+ asm("loop:");
+ asm("stx %g0,[%o3]"); /* *(long *)p = 0 */
+ asm("cmp %o3,%o1");
+ asm("bgu,pt %xcc, loop"); /* if (p > limit) goto loop */
+ asm("add %o3,-8,%o3"); /* p -= 8 (delay slot) */
+ asm("retl");
+ asm("mov %o2,%sp"); /* Restore sp., delay slot */
+#else
asm("mov %sp,%o2"); /* Save sp */
asm("add %sp,-8,%o3"); /* p = sp-8 */
asm("clr %g1"); /* [g0,g1] = 0 */
@@ -446,6 +565,7 @@ ptr_t cold_gc_frame;
asm("add %o3,-8,%o3"); /* p -= 8 (delay slot) */
asm("retl");
asm("mov %o2,%sp"); /* Restore sp., delay slot */
+#endif /* old SPARC */
/* First argument = %o0 = return value */
# ifdef SVR4
asm(" .GC_clear_stack_inner_end:");
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-21 19:53:56 +0000