the ipv6 socks5 proxy is working now

1 files changed, 261 insertions, 0 deletions

diff --git a/ipv6/torrc b/ipv6/torrc
new file mode 100644
index 0000000..4fc242f
--- /dev/null
+++ b/ipv6/torrc
@@ -0,0 +1,261 @@
+# vi: set syntax=config :
+## Configuration file for a typical Tor user
+## Last updated 28 February 2019 for Tor 0.3.5.1-alpha.
+## (may or may not work for much older or much newer versions of Tor.)
+##
+## Lines that begin with "## " try to explain what's going on. Lines
+## that begin with just "#" are disabled commands: you can enable them
+## by removing the "#" symbol.
+##
+## See 'man tor', or https://www.torproject.org/docs/tor-manual.html,
+## for more options you can use in this file.
+##
+## Tor will look for this file in various places based on your platform:
+## https://www.torproject.org/docs/faq#torrc
+
+# ControlSocket /run/tor/control
+# ControlSocketsGroupWritable 1
+# CookieAuthentication 1
+# CookieAuthFile /run/tor/control.authcookie
+# CookieAuthFileGroupReadable 1
+
+## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't
+## configure one below. Set "SOCKSPort 0" if you plan to run Tor only
+## as a relay, and not make any local application connections yourself.
+##SOCKSPort [::1]:9050 # Default: Bind to localhost:9050 for local connections.
+#SOCKSPort 192.168.0.1:9100 # Bind to this address:port too.
+SOCKSPort 0
+
+## Entry policies to allow/deny SOCKS requests based on IP address.
+## First entry that matches wins. If no SOCKSPolicy is set, we accept
+## all (and only) requests that reach a SOCKSPort. Untrusted users who
+## can access your SOCKSPort may be able to learn about the connections
+## you make.
+#SOCKSPolicy accept 192.168.0.0/16
+#SOCKSPolicy accept6 FC00::/7
+#SOCKSPolicy reject *
+
+## Logs go to stdout at level "notice" unless redirected by something
+## else, like one of the below lines. You can have as many Log lines as
+## you want.
+##
+## We advise using "notice" in most cases, since anything more verbose
+## may provide sensitive information to an attacker who obtains the logs.
+##
+## Send all messages of level 'notice' or higher to /var/log/tor/notices.log
+#Log notice file /var/log/tor/notices.log
+## Send every possible message to /var/log/tor/debug.log
+#Log debug file /var/log/tor/debug.log
+## Use the system log instead of Tor's logfiles
+#Log notice syslog
+## To send all messages to stderr:
+#Log debug stderr
+
+## Uncomment this to start the process in the background... or use
+## --runasdaemon 1 on the command line. This is ignored on Windows;
+## see the FAQ entry if you want Tor to run as an NT service.
+#RunAsDaemon 1
+
+## The directory for keeping all the keys/etc. By default, we store
+## things in $HOME/.tor on Unix, and in Application Data\tor on Windows.
+#DataDirectory /var/lib/tor
+
+## The port on which Tor will listen for local connections from Tor
+## controller applications, as documented in control-spec.txt.
+ControlPort 9051
+## If you enable the controlport, be sure to enable one of these
+## authentication methods, to prevent attackers from accessing it.
+# HashedControlPassword 16:872860B76453A77D60CA2BB8C1A7042072093276A3D701AD684053EC4C
+CookieAuthentication 1
+
+############### This section is just for location-hidden services ###
+
+## Once you have configured a hidden service, you can look at the
+## contents of the file ".../hidden_service/hostname" for the address
+## to tell people.
+##
+## HiddenServicePort x y:z says to redirect requests on port x to the
+## address y:z.
+
+#HiddenServiceDir /var/lib/tor/hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+
+#HiddenServiceDir /var/lib/tor/other_hidden_service/
+#HiddenServicePort 80 127.0.0.1:80
+#HiddenServicePort 22 127.0.0.1:22
+
+################ This section is just for relays #####################
+#
+## See https://www.torproject.org/docs/tor-doc-relay for details.
+
+## Required: what port to advertise for incoming Tor connections.
+#ORPort 9001
+## If you want to listen on a port other than the one advertised in
+## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as
+## follows.  You'll need to do ipchains or other port forwarding
+## yourself to make this work.
+#ORPort 443 NoListen
+#ORPort 127.0.0.1:9090 NoAdvertise
+
+## The IP address or full DNS name for incoming connections to your
+## relay. Leave commented out and Tor will guess.
+#Address noname.example.com
+
+## If you have multiple network interfaces, you can specify one for
+## outgoing traffic to use.
+## OutboundBindAddressExit will be used for all exit traffic, while
+## OutboundBindAddressOR will be used for all OR and Dir connections
+## (DNS connections ignore OutboundBindAddress).
+## If you do not wish to differentiate, use OutboundBindAddress to
+## specify the same address for both in a single line.
+#OutboundBindAddressExit 10.0.0.4
+#OutboundBindAddressOR 10.0.0.5
+
+## A handle for your relay, so people don't have to refer to it by key.
+## Nicknames must be between 1 and 19 characters inclusive, and must
+## contain only the characters [a-zA-Z0-9].
+## If not set, "Unnamed" will be used.
+#Nickname ididnteditheconfig
+
+## Define these to limit how much relayed traffic you will allow. Your
+## own traffic is still unthrottled. Note that RelayBandwidthRate must
+## be at least 75 kilobytes per second.
+## Note that units for these config options are bytes (per second), not
+## bits (per second), and that prefixes are binary prefixes, i.e. 2^10,
+## 2^20, etc.
+#RelayBandwidthRate 100 KBytes  # Throttle traffic to 100KB/s (800Kbps)
+#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb)
+
+## Use these to restrict the maximum traffic per day, week, or month.
+## Note that this threshold applies separately to sent and received bytes,
+## not to their sum: setting "40 GB" may allow up to 80 GB total before
+## hibernating.
+##
+## Set a maximum of 40 gigabytes each way per period.
+#AccountingMax 40 GBytes
+## Each period starts daily at midnight (AccountingMax is per day)
+#AccountingStart day 00:00
+## Each period starts on the 3rd of the month at 15:00 (AccountingMax
+## is per month)
+#AccountingStart month 3 15:00
+
+## Administrative contact information for this relay or bridge. This line
+## can be used to contact you if your relay or bridge is misconfigured or
+## something else goes wrong. Note that we archive and publish all
+## descriptors containing these lines and that Google indexes them, so
+## spammers might also collect them. You may want to obscure the fact that
+## it's an email address and/or generate a new address for this purpose.
+##
+## If you are running multiple relays, you MUST set this option.
+##
+#ContactInfo Random Person <nobody AT example dot com>
+## You might also include your PGP or GPG fingerprint if you have one:
+#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com>
+
+## Uncomment this to mirror directory information for others. Please do
+## if you have enough bandwidth.
+#DirPort 9030 # what port to advertise for directory connections
+## If you want to listen on a port other than the one advertised in
+## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as
+## follows.  below too. You'll need to do ipchains or other port
+## forwarding yourself to make this work.
+#DirPort 80 NoListen
+#DirPort 127.0.0.1:9091 NoAdvertise
+## Uncomment to return an arbitrary blob of html on your DirPort. Now you
+## can explain what Tor is if anybody wonders why your IP address is
+## contacting them. See contrib/tor-exit-notice.html in Tor's source
+## distribution for a sample.
+#DirPortFrontPage /etc/tor/tor-exit-notice.html
+
+## Uncomment this if you run more than one Tor relay, and add the identity
+## key fingerprint of each Tor relay you control, even if they're on
+## different networks. You declare it here so Tor clients can avoid
+## using more than one of your relays in a single circuit. See
+## https://www.torproject.org/docs/faq#MultipleRelays
+## However, you should never include a bridge's fingerprint here, as it would
+## break its concealability and potentially reveal its IP/TCP address.
+##
+## If you are running multiple relays, you MUST set this option.
+##
+## Note: do not use MyFamily on bridge relays.
+#MyFamily $keyid,$keyid,...
+
+## Uncomment this if you want your relay to be an exit, with the default
+## exit policy (or whatever exit policy you set below).
+## (If ReducedExitPolicy, ExitPolicy, or IPv6Exit are set, relays are exits.
+## If none of these options are set, relays are non-exits.)
+#ExitRelay 1
+
+## Uncomment this if you want your relay to allow IPv6 exit traffic.
+## (Relays do not allow any exit traffic by default.)
+#IPv6Exit 1
+
+## Uncomment this if you want your relay to be an exit, with a reduced set
+## of exit ports.
+#ReducedExitPolicy 1
+
+## Uncomment these lines if you want your relay to be an exit, with the
+## specified set of exit IPs and ports.
+##
+## A comma-separated list of exit policies. They're considered first
+## to last, and the first match wins.
+##
+## If you want to allow the same ports on IPv4 and IPv6, write your rules
+## using accept/reject *. If you want to allow different ports on IPv4 and
+## IPv6, write your IPv6 rules using accept6/reject6 *6, and your IPv4 rules
+## using accept/reject *4.
+##
+## If you want to _replace_ the default exit policy, end this with either a
+## reject *:* or an accept *:*. Otherwise, you're _augmenting_ (prepending to)
+## the default exit policy. Leave commented to just use the default, which is
+## described in the man page or at
+## https://www.torproject.org/documentation.html
+##
+## Look at https://www.torproject.org/faq-abuse.html#TypicalAbuses
+## for issues you might encounter if you use the default exit policy.
+##
+## If certain IPs and ports are blocked externally, e.g. by your firewall,
+## you should update your exit policy to reflect this -- otherwise Tor
+## users will be told that those destinations are down.
+##
+## For security, by default Tor rejects connections to private (local)
+## networks, including to the configured primary public IPv4 and IPv6 addresses,
+## and any public IPv4 and IPv6 addresses on any interface on the relay.
+## See the man page entry for ExitPolicyRejectPrivate if you want to allow
+## "exit enclaving".
+##
+#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports on IPv4 and IPv6 but no more
+#ExitPolicy accept *:119 # accept nntp ports on IPv4 and IPv6 as well as default exit policy
+#ExitPolicy accept *4:119 # accept nntp ports on IPv4 only as well as default exit policy
+#ExitPolicy accept6 *6:119 # accept nntp ports on IPv6 only as well as default exit policy
+#ExitPolicy reject *:* # no exits allowed
+
+## Bridge relays (or "bridges") are Tor relays that aren't listed in the
+## main directory. Since there is no complete public list of them, even an
+## ISP that filters connections to all the known Tor relays probably
+## won't be able to block all the bridges. Also, websites won't treat you
+## differently because they won't know you're running Tor. If you can
+## be a real relay, please do; but if not, be a bridge!
+##
+## Warning: when running your Tor as a bridge, make sure than MyFamily is
+## NOT configured.
+#BridgeRelay 1
+## By default, Tor will advertise your bridge to users through various
+## mechanisms like https://bridges.torproject.org/. If you want to run
+## a private bridge, for example because you'll give out your bridge
+## address manually to your friends, uncomment this line:
+#PublishServerDescriptor 0
+
+## Configuration options can be imported from files or folders using the %include
+## option with the value being a path. If the path is a file, the options from the
+## file will be parsed as if they were written where the %include option is. If
+## the path is a folder, all files on that folder will be parsed following lexical
+## order. Files starting with a dot are ignored. Files on subfolders are ignored.
+## The %include option can be used recursively.
+#%include /etc/torrc.d/
+#%include /etc/torrc.custom
+ClientUseIPv4 0
+ClientUseIPv6 1
+ClientPreferIPv6ORPort 1
+AddressDisableIPv6 0
+HTTPTunnelPort [::1]:8118