diff options
Diffstat (limited to 'etc')
| -rw-r--r-- | etc/libvirt/qemu.conf | 970 |
1 files changed, 970 insertions, 0 deletions
diff --git a/etc/libvirt/qemu.conf b/etc/libvirt/qemu.conf new file mode 100644 index 0000000..57b2848 --- /dev/null +++ b/etc/libvirt/qemu.conf @@ -0,0 +1,970 @@ +# Master configuration file for the QEMU driver. +# All settings described here are optional - if omitted, sensible +# defaults are used. + +# Use of TLS requires that x509 certificates be issued. The default is +# to keep them in /etc/pki/qemu. This directory must contain +# +# ca-cert.pem - the CA master certificate +# server-cert.pem - the server certificate signed with ca-cert.pem +# server-key.pem - the server private key +# +# and optionally may contain +# +# dh-params.pem - the DH params configuration file +# +# If the directory does not exist, libvirtd will fail to start. If the +# directory doesn't contain the necessary files, QEMU domains will fail +# to start if they are configured to use TLS. +# +# In order to overwrite the default path alter the following. This path +# definition will be used as the default path for other *_tls_x509_cert_dir +# configuration settings if their default path does not exist or is not +# specifically set. +# +#default_tls_x509_cert_dir = "/etc/pki/qemu" + + +# The default TLS configuration only uses certificates for the server +# allowing the client to verify the server's identity and establish +# an encrypted channel. +# +# It is possible to use x509 certificates for authentication too, by +# issuing an x509 certificate to every client who needs to connect. +# +# Enabling this option will reject any client who does not have a +# certificate signed by the CA in /etc/pki/qemu/ca-cert.pem +# +# The default_tls_x509_cert_dir directory must also contain +# +# client-cert.pem - the client certificate signed with the ca-cert.pem +# client-key.pem - the client private key +# +# If this option is supplied it provides the default for the "_verify" option +# of specific TLS users such as vnc, backups, migration, etc. The specific +# users of TLS may override this by setting the specific "_verify" option. +# +# When not supplied the specific TLS users provide their own defaults. +# +#default_tls_x509_verify = 1 + +# +# Libvirt assumes the server-key.pem file is unencrypted by default. +# To use an encrypted server-key.pem file, the password to decrypt +# the PEM file is required. This can be provided by creating a secret +# object in libvirt and then to uncomment this setting to set the UUID +# of the secret. +# +# NB This default all-zeros UUID will not work. Replace it with the +# output from the UUID for the TLS secret from a 'virsh secret-list' +# command and then uncomment the entry +# +#default_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000" + + +# VNC is configured to listen on 127.0.0.1 by default. +# To make it listen on all public interfaces, uncomment +# this next option. +# +# NB, strong recommendation to enable TLS + x509 certificate +# verification when allowing public access +# +#vnc_listen = "0.0.0.0" + +# Enable this option to have VNC served over an automatically created +# unix socket. This prevents unprivileged access from users on the +# host machine, though most VNC clients do not support it. +# +# This will only be enabled for VNC configurations that have listen +# type=address but without any address specified. This setting takes +# preference over vnc_listen. +# +#vnc_auto_unix_socket = 1 + +# Enable use of TLS encryption on the VNC server. This requires +# a VNC client which supports the VeNCrypt protocol extension. +# Examples include vinagre, virt-viewer, virt-manager and vencrypt +# itself. UltraVNC, RealVNC, TightVNC do not support this +# +# It is necessary to setup CA and issue a server certificate +# before enabling this. +# +#vnc_tls = 1 + + +# In order to override the default TLS certificate location for +# vnc certificates, supply a valid path to the certificate directory. +# If the provided path does not exist, libvirtd will fail to start. +# If the path is not provided, but vnc_tls = 1, then the +# default_tls_x509_cert_dir path will be used. +# +#vnc_tls_x509_cert_dir = "/etc/pki/libvirt-vnc" + + +# Uncomment and use the following option to override the default secret +# UUID provided in the default_tls_x509_secret_uuid parameter. +# +#vnc_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000" + + +# The default TLS configuration only uses certificates for the server +# allowing the client to verify the server's identity and establish +# an encrypted channel. +# +# It is possible to use x509 certificates for authentication too, by +# issuing an x509 certificate to every client who needs to connect. +# +# Enabling this option will reject any client that does not have a +# certificate (as described in default_tls_x509_verify) signed by the +# CA in the vnc_tls_x509_cert_dir (or default_tls_x509_cert_dir). +# +# If this option is not supplied, it will be set to the value of +# "default_tls_x509_verify". If "default_tls_x509_verify" is not supplied either, +# the default is "0". +# +#vnc_tls_x509_verify = 1 + + +# The default VNC password. Only 8 bytes are significant for +# VNC passwords. This parameter is only used if the per-domain +# XML config does not already provide a password. To allow +# access without passwords, leave this commented out. An empty +# string will still enable passwords, but be rejected by QEMU, +# effectively preventing any use of VNC. Obviously change this +# example here before you set this. +# +#vnc_password = "" + + +# Enable use of SASL encryption on the VNC server. This requires +# a VNC client which supports the SASL protocol extension. +# Examples include vinagre, virt-viewer and virt-manager +# itself. UltraVNC, RealVNC, TightVNC do not support this +# +# It is necessary to configure /etc/sasl2/qemu.conf to choose +# the desired SASL plugin (eg, GSSPI for Kerberos) +# +#vnc_sasl = 1 + + +# The default SASL configuration file is located in /etc/sasl2/ +# When running libvirtd unprivileged, it may be desirable to +# override the configs in this location. Set this parameter to +# point to the directory, and create a qemu.conf in that location +# +#vnc_sasl_dir = "/some/directory/sasl2" + + +# QEMU implements an extension for providing audio over a VNC connection, +# though if your VNC client does not support it, your only chance for getting +# sound output is through regular audio backends. By default, libvirt will +# disable all QEMU sound backends if using VNC, since they can cause +# permissions issues. Enabling this option will make libvirtd honor the +# QEMU_AUDIO_DRV environment variable when using VNC. +# +#vnc_allow_host_audio = 0 + + + +# SPICE is configured to listen on 127.0.0.1 by default. +# To make it listen on all public interfaces, uncomment +# this next option. +# +# NB, strong recommendation to enable TLS + x509 certificate +# verification when allowing public access +# +#spice_listen = "0.0.0.0" + + +# Enable use of TLS encryption on the SPICE server. +# +# It is necessary to setup CA and issue a server certificate +# before enabling this. +# +#spice_tls = 1 + + +# In order to override the default TLS certificate location for +# spice certificates, supply a valid path to the certificate directory. +# If the provided path does not exist, libvirtd will fail to start. +# If the path is not provided, but spice_tls = 1, then the +# default_tls_x509_cert_dir path will be used. +# +#spice_tls_x509_cert_dir = "/etc/pki/libvirt-spice" + + +# Enable this option to have SPICE served over an automatically created +# unix socket. This prevents unprivileged access from users on the +# host machine. +# +# This will only be enabled for SPICE configurations that have listen +# type=address but without any address specified. This setting takes +# preference over spice_listen. +# +#spice_auto_unix_socket = 1 + + +# The default SPICE password. This parameter is only used if the +# per-domain XML config does not already provide a password. To +# allow access without passwords, leave this commented out. An +# empty string will still enable passwords, but be rejected by +# QEMU, effectively preventing any use of SPICE. Obviously change +# this example here before you set this. +# +#spice_password = "" + + +# Enable use of SASL encryption on the SPICE server. This requires +# a SPICE client which supports the SASL protocol extension. +# +# It is necessary to configure /etc/sasl2/qemu.conf to choose +# the desired SASL plugin (eg, GSSPI for Kerberos) +# +#spice_sasl = 1 + +# The default SASL configuration file is located in /etc/sasl2/ +# When running libvirtd unprivileged, it may be desirable to +# override the configs in this location. Set this parameter to +# point to the directory, and create a qemu.conf in that location +# +#spice_sasl_dir = "/some/directory/sasl2" + +# Enable use of TLS encryption on the chardev TCP transports. +# +# It is necessary to setup CA and issue a server certificate +# before enabling this. +# +#chardev_tls = 1 + + +# In order to override the default TLS certificate location for character +# device TCP certificates, supply a valid path to the certificate directory. +# If the provided path does not exist, libvirtd will fail to start. +# If the path is not provided, but chardev_tls = 1, then the +# default_tls_x509_cert_dir path will be used. +# +#chardev_tls_x509_cert_dir = "/etc/pki/libvirt-chardev" + + +# The default TLS configuration only uses certificates for the server +# allowing the client to verify the server's identity and establish +# an encrypted channel. +# +# It is possible to use x509 certificates for authentication too, by +# issuing an x509 certificate to every client who needs to connect. +# +# Enabling this option will reject any client that does not have a +# certificate (as described in default_tls_x509_verify) signed by the +# CA in the chardev_tls_x509_cert_dir (or default_tls_x509_cert_dir). +# +# If this option is not supplied, it will be set to the value of +# "default_tls_x509_verify". If "default_tls_x509_verify" is not supplied either, +# the default is "1". +# +#chardev_tls_x509_verify = 1 + + +# Uncomment and use the following option to override the default secret +# UUID provided in the default_tls_x509_secret_uuid parameter. +# +# NB This default all-zeros UUID will not work. Replace it with the +# output from the UUID for the TLS secret from a 'virsh secret-list' +# command and then uncomment the entry +# +#chardev_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000" + + +# Enable use of TLS encryption for all VxHS network block devices that +# don't specifically disable. +# +# When the VxHS network block device server is set up appropriately, +# x509 certificates are required for authentication between the clients +# (qemu processes) and the remote VxHS server. +# +# It is necessary to setup CA and issue the client certificate before +# enabling this. +# +#vxhs_tls = 1 + + +# In order to override the default TLS certificate location for VxHS +# backed storage, supply a valid path to the certificate directory. +# This is used to authenticate the VxHS block device clients to the VxHS +# server. +# +# If the provided path does not exist, libvirtd will fail to start. +# If the path is not provided, but vxhs_tls = 1, then the +# default_tls_x509_cert_dir path will be used. +# +# VxHS block device clients expect the client certificate and key to be +# present in the certificate directory along with the CA master certificate. +# If using the default environment, default_tls_x509_verify must be configured. +# Since this is only a client the server-key.pem certificate is not needed. +# Thus a VxHS directory must contain the following: +# +# ca-cert.pem - the CA master certificate +# client-cert.pem - the client certificate signed with the ca-cert.pem +# client-key.pem - the client private key +# +#vxhs_tls_x509_cert_dir = "/etc/pki/libvirt-vxhs" + + +# Uncomment and use the following option to override the default secret +# UUID provided in the default_tls_x509_secret_uuid parameter. +# +# NB This default all-zeros UUID will not work. Replace it with the +# output from the UUID for the TLS secret from a 'virsh secret-list' +# command and then uncomment the entry +# +#vxhs_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000" + + +# Enable use of TLS encryption for all NBD disk devices that don't +# specifically disable it. +# +# When the NBD server is set up appropriately, x509 certificates are required +# for authentication between the client and the remote NBD server. +# +# It is necessary to setup CA and issue the client certificate before +# enabling this. +# +#nbd_tls = 1 + + +# In order to override the default TLS certificate location for NBD +# backed storage, supply a valid path to the certificate directory. +# This is used to authenticate the NBD block device clients to the NBD +# server. +# +# If the provided path does not exist, libvirtd will fail to start. +# If the path is not provided, but nbd_tls = 1, then the +# default_tls_x509_cert_dir path will be used. +# +# NBD block device clients expect the client certificate and key to be +# present in the certificate directory along with the CA certificate. +# Since this is only a client the server-key.pem certificate is not needed. +# Thus a NBD directory must contain the following: +# +# ca-cert.pem - the CA master certificate +# client-cert.pem - the client certificate signed with the ca-cert.pem +# client-key.pem - the client private key +# +#nbd_tls_x509_cert_dir = "/etc/pki/libvirt-nbd" + + +# Uncomment and use the following option to override the default secret +# UUID provided in the default_tls_x509_secret_uuid parameter. +# +# NB This default all-zeros UUID will not work. Replace it with the +# output from the UUID for the TLS secret from a 'virsh secret-list' +# command and then uncomment the entry +# +#nbd_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000" + + +# In order to override the default TLS certificate location for migration +# certificates, supply a valid path to the certificate directory. If the +# provided path does not exist, libvirtd will fail to start. If the path is +# not provided, but TLS-encrypted migration is requested, then the +# default_tls_x509_cert_dir path will be used. Once/if a default certificate is +# enabled/defined, migration will then be able to use the certificate via +# migration API flags. +# +#migrate_tls_x509_cert_dir = "/etc/pki/libvirt-migrate" + + +# The default TLS configuration only uses certificates for the server +# allowing the client to verify the server's identity and establish +# an encrypted channel. +# +# It is possible to use x509 certificates for authentication too, by +# issuing an x509 certificate to every client who needs to connect. +# +# Enabling this option will reject any client that does not have a +# certificate (as described in default_tls_x509_verify) signed by the +# CA in the migrate_tls_x509_cert_dir (or default_tls_x509_cert_dir). +# +# If this option is not supplied, it will be set to the value of +# "default_tls_x509_verify". If "default_tls_x509_verify" is not supplied +# either, the default is "1". +# +#migrate_tls_x509_verify = 1 + + +# Uncomment and use the following option to override the default secret +# UUID provided in the default_tls_x509_secret_uuid parameter. +# +# NB This default all-zeros UUID will not work. Replace it with the +# output from the UUID for the TLS secret from a 'virsh secret-list' +# command and then uncomment the entry +# +#migrate_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000" + + +# By default TLS is requested using the VIR_MIGRATE_TLS flag, thus not requested +# automatically. Setting 'migate_tls_force' to "1" will prevent any migration +# which is not using VIR_MIGRATE_TLS to ensure higher level of security in +# deployments with TLS. +# +#migrate_tls_force = 0 + + +# In order to override the default TLS certificate location for backup NBD +# server certificates, supply a valid path to the certificate directory. If the +# provided path does not exist, libvirtd will fail to start. If the path is +# not provided, but TLS-encrypted backup is requested, then the +# default_tls_x509_cert_dir path will be used. +# +#backup_tls_x509_cert_dir = "/etc/pki/libvirt-backup" + + +# The default TLS configuration only uses certificates for the server +# allowing the client to verify the server's identity and establish +# an encrypted channel. +# +# It is possible to use x509 certificates for authentication too, by +# issuing an x509 certificate to every client who needs to connect. +# +# Enabling this option will reject any client that does not have a +# certificate (as described in default_tls_x509_verify) signed by the +# CA in the backup_tls_x509_cert_dir (or default_tls_x509_cert_dir). +# +# If this option is not supplied, it will be set to the value of +# "default_tls_x509_verify". If "default_tls_x509_verify" is not supplied either, +# the default is "1". +# +#backup_tls_x509_verify = 1 + + +# Uncomment and use the following option to override the default secret +# UUID provided in the default_tls_x509_secret_uuid parameter. +# +# NB This default all-zeros UUID will not work. Replace it with the +# output from the UUID for the TLS secret from a 'virsh secret-list' +# command and then uncomment the entry +# +#backup_tls_x509_secret_uuid = "00000000-0000-0000-0000-000000000000" + + +# By default, if no graphical front end is configured, libvirt will disable +# QEMU audio output since directly talking to alsa/pulseaudio may not work +# with various security settings. If you know what you're doing, enable +# the setting below and libvirt will passthrough the QEMU_AUDIO_DRV +# environment variable when using nographics. +# +#nographics_allow_host_audio = 1 + + +# Override the port for creating both VNC and SPICE sessions (min). +# This defaults to 5900 and increases for consecutive sessions +# or when ports are occupied, until it hits the maximum. +# +# Minimum must be greater than or equal to 5900 as lower number would +# result into negative vnc display number. +# +# Maximum must be less than 65536, because higher numbers do not make +# sense as a port number. +# +#remote_display_port_min = 5900 +#remote_display_port_max = 65535 + +# VNC WebSocket port policies, same rules apply as with remote display +# ports. VNC WebSockets use similar display <-> port mappings, with +# the exception being that ports start from 5700 instead of 5900. +# +#remote_websocket_port_min = 5700 +#remote_websocket_port_max = 65535 + +# The default security driver is SELinux. If SELinux is disabled +# on the host, then the security driver will automatically disable +# itself. If you wish to disable QEMU SELinux security driver while +# leaving SELinux enabled for the host in general, then set this +# to 'none' instead. It's also possible to use more than one security +# driver at the same time, for this use a list of names separated by +# comma and delimited by square brackets. For example: +# +# security_driver = [ "selinux", "apparmor" ] +# +# Notes: The DAC security driver is always enabled; as a result, the +# value of security_driver cannot contain "dac". The value "none" is +# a special value; security_driver can be set to that value in +# isolation, but it cannot appear in a list of drivers. +# +#security_driver = "selinux" + +# If set to non-zero, then the default security labeling +# will make guests confined. If set to zero, then guests +# will be unconfined by default. Defaults to 1. +#security_default_confined = 1 + +# If set to non-zero, then attempts to create unconfined +# guests will be blocked. Defaults to 0. +#security_require_confined = 1 + +# The user for QEMU processes run by the system instance. It can be +# specified as a user name or as a user id. The qemu driver will try to +# parse this value first as a name and then, if the name doesn't exist, +# as a user id. +# +# Since a sequence of digits is a valid user name, a leading plus sign +# can be used to ensure that a user id will not be interpreted as a user +# name. +# +# Some examples of valid values are: +# +# user = "qemu" # A user named "qemu" +# user = "+0" # Super user (uid=0) +# user = "100" # A user named "100" or a user with uid=100 +# +user = "devi" + +# The group for QEMU processes run by the system instance. It can be +# specified in a similar way to user. +group = "libvirt" + +# Whether libvirt should dynamically change file ownership +# to match the configured user/group above. Defaults to 1. +# Set to 0 to disable file ownership changes. +#dynamic_ownership = 1 + +# Whether libvirt should remember and restore the original +# ownership over files it is relabeling. Defaults to 1, set +# to 0 to disable the feature. +#remember_owner = 1 + +# What cgroup controllers to make use of with QEMU guests +# +# - 'cpu' - use for scheduler tunables +# - 'devices' - use for device access control +# - 'memory' - use for memory tunables +# - 'blkio' - use for block devices I/O tunables +# - 'cpuset' - use for CPUs and memory nodes +# - 'cpuacct' - use for CPUs statistics. +# +# NB, even if configured here, they won't be used unless +# the administrator has mounted cgroups, e.g.: +# +# mkdir /dev/cgroup +# mount -t cgroup -o devices,cpu,memory,blkio,cpuset none /dev/cgroup +# +# They can be mounted anywhere, and different controllers +# can be mounted in different locations. libvirt will detect +# where they are located. +# +#cgroup_controllers = [ "cpu", "devices", "memory", "blkio", "cpuset", "cpuacct" ] + +# This is the basic set of devices allowed / required by +# all virtual machines. +# +# As well as this, any configured block backed disks, +# all sound device, and all PTY devices are allowed. +# +# This will only need setting if newer QEMU suddenly +# wants some device we don't already know about. +# +#cgroup_device_acl = [ +# "/dev/null", "/dev/full", "/dev/zero", +# "/dev/random", "/dev/urandom", +# "/dev/ptmx", "/dev/kvm" +#] +# +# RDMA migration requires the following extra files to be added to the list: +# "/dev/infiniband/rdma_cm", +# "/dev/infiniband/issm0", +# "/dev/infiniband/issm1", +# "/dev/infiniband/umad0", +# "/dev/infiniband/umad1", +# "/dev/infiniband/uverbs0" + + +# The default format for QEMU/KVM guest save images is raw; that is, the +# memory from the domain is dumped out directly to a file. If you have +# guests with a large amount of memory, however, this can take up quite +# a bit of space. If you would like to compress the images while they +# are being saved to disk, you can also set "lzop", "gzip", "bzip2", or "xz" +# for save_image_format. Note that this means you slow down the process of +# saving a domain in order to save disk space; the list above is in descending +# order by performance and ascending order by compression ratio. +# +# save_image_format is used when you use 'virsh save' or 'virsh managedsave' +# at scheduled saving, and it is an error if the specified save_image_format +# is not valid, or the requested compression program can't be found. +# +# dump_image_format is used when you use 'virsh dump' at emergency +# crashdump, and if the specified dump_image_format is not valid, or +# the requested compression program can't be found, this falls +# back to "raw" compression. +# +# snapshot_image_format specifies the compression algorithm of the memory save +# image when an external snapshot of a domain is taken. This does not apply +# on disk image format. It is an error if the specified format isn't valid, +# or the requested compression program can't be found. +# +#save_image_format = "raw" +#dump_image_format = "raw" +#snapshot_image_format = "raw" + +# When a domain is configured to be auto-dumped when libvirtd receives a +# watchdog event from qemu guest, libvirtd will save dump files in directory +# specified by auto_dump_path. Default value is /var/lib/libvirt/qemu/dump +# +#auto_dump_path = "/var/lib/libvirt/qemu/dump" + +# When a domain is configured to be auto-dumped, enabling this flag +# has the same effect as using the VIR_DUMP_BYPASS_CACHE flag with the +# virDomainCoreDump API. That is, the system will avoid using the +# file system cache while writing the dump file, but may cause +# slower operation. +# +#auto_dump_bypass_cache = 0 + +# When a domain is configured to be auto-started, enabling this flag +# has the same effect as using the VIR_DOMAIN_START_BYPASS_CACHE flag +# with the virDomainCreateWithFlags API. That is, the system will +# avoid using the file system cache when restoring any managed state +# file, but may cause slower operation. +# +#auto_start_bypass_cache = 0 + +# If provided by the host and a hugetlbfs mount point is configured, +# a guest may request huge page backing. When this mount point is +# unspecified here, determination of a host mount point in /proc/mounts +# will be attempted. Specifying an explicit mount overrides detection +# of the same in /proc/mounts. Setting the mount point to "" will +# disable guest hugepage backing. If desired, multiple mount points can +# be specified at once, separated by comma and enclosed in square +# brackets, for example: +# +# hugetlbfs_mount = ["/dev/hugepages2M", "/dev/hugepages1G"] +# +# The size of huge page served by specific mount point is determined by +# libvirt at the daemon startup. +# +# NB, within these mount points, guests will create memory backing +# files in a location of $MOUNTPOINT/libvirt/qemu +# +#hugetlbfs_mount = "/dev/hugepages" + + +# Path to the setuid helper for creating tap devices. This executable +# is used to create <source type='bridge'> interfaces when libvirtd is +# running unprivileged. libvirt invokes the helper directly, instead +# of using "-netdev bridge", for security reasons. +#bridge_helper = "/usr/libexec/qemu-bridge-helper" + + +# If enabled, libvirt will have QEMU set its process name to +# "qemu:VM_NAME", where VM_NAME is the name of the VM. The QEMU +# process will appear as "qemu:VM_NAME" in process listings and +# other system monitoring tools. By default, QEMU does not set +# its process title, so the complete QEMU command (emulator and +# its arguments) appear in process listings. +# +#set_process_name = 1 + + +# If max_processes is set to a positive integer, libvirt will use +# it to set the maximum number of processes that can be run by qemu +# user. This can be used to override default value set by host OS. +# The same applies to max_files which sets the limit on the maximum +# number of opened files. +# +#max_processes = 0 +#max_files = 0 + +# If max_threads_per_process is set to a positive integer, libvirt +# will use it to set the maximum number of threads that can be +# created by a qemu process. Some VM configurations can result in +# qemu processes with tens of thousands of threads. systemd-based +# systems typically limit the number of threads per process to +# 16k. max_threads_per_process can be used to override default +# limits in the host OS. +# +#max_threads_per_process = 0 + +# If max_core is set to a non-zero integer, then QEMU will be +# permitted to create core dumps when it crashes, provided its +# RAM size is smaller than the limit set. +# +# Be warned that the core dump will include a full copy of the +# guest RAM, if the 'dump_guest_core' setting has been enabled, +# or if the guest XML contains +# +# <memory dumpcore="on">...guest ram...</memory> +# +# If guest RAM is to be included, ensure the max_core limit +# is set to at least the size of the largest expected guest +# plus another 1GB for any QEMU host side memory mappings. +# +# As a special case it can be set to the string "unlimited" to +# to allow arbitrarily sized core dumps. +# +# By default the core dump size is set to 0 disabling all dumps +# +# Size is a positive integer specifying bytes or the +# string "unlimited" +# +#max_core = "unlimited" + +# Determine if guest RAM is included in QEMU core dumps. By +# default guest RAM will be excluded if a new enough QEMU is +# present. Setting this to '1' will force guest RAM to always +# be included in QEMU core dumps. +# +# This setting will be ignored if the guest XML has set the +# dumpcore attribute on the <memory> element. +# +#dump_guest_core = 1 + +# mac_filter enables MAC addressed based filtering on bridge ports. +# This currently requires ebtables to be installed. +# +#mac_filter = 1 + + +# By default, PCI devices below non-ACS switch are not allowed to be assigned +# to guests. By setting relaxed_acs_check to 1 such devices will be allowed to +# be assigned to guests. +# +#relaxed_acs_check = 1 + + +# In order to prevent accidentally starting two domains that +# share one writable disk, libvirt offers two approaches for +# locking files. The first one is sanlock, the other one, +# virtlockd, is then our own implementation. Accepted values +# are "sanlock" and "lockd". +# +#lock_manager = "lockd" + + +# Set limit of maximum APIs queued on one domain. All other APIs +# over this threshold will fail on acquiring job lock. Specially, +# setting to zero turns this feature off. +# Note, that job lock is per domain. +# +#max_queued = 0 + +################################################################### +# Keepalive protocol: +# This allows qemu driver to detect broken connections to remote +# libvirtd during peer-to-peer migration. A keepalive message is +# sent to the daemon after keepalive_interval seconds of inactivity +# to check if the daemon is still responding; keepalive_count is a +# maximum number of keepalive messages that are allowed to be sent +# to the daemon without getting any response before the connection +# is considered broken. In other words, the connection is +# automatically closed approximately after +# keepalive_interval * (keepalive_count + 1) seconds since the last +# message received from the daemon. If keepalive_interval is set to +# -1, qemu driver will not send keepalive requests during +# peer-to-peer migration; however, the remote libvirtd can still +# send them and source libvirtd will send responses. When +# keepalive_count is set to 0, connections will be automatically +# closed after keepalive_interval seconds of inactivity without +# sending any keepalive messages. +# +#keepalive_interval = 5 +#keepalive_count = 5 + + + +# Use seccomp syscall filtering sandbox in QEMU. +# 1 == filter enabled, 0 == filter disabled +# +# Unless this option is disabled, QEMU will be run with +# a seccomp filter that stops it from executing certain +# syscalls. +# +#seccomp_sandbox = 1 + + +# Override the listen address for all incoming migrations. Defaults to +# 0.0.0.0, or :: if both host and qemu are capable of IPv6. +#migration_address = "0.0.0.0" + + +# The default hostname or IP address which will be used by a migration +# source for transferring migration data to this host. The migration +# source has to be able to resolve this hostname and connect to it so +# setting "localhost" will not work. By default, the host's configured +# hostname is used. +#migration_host = "host.example.com" + + +# Override the port range used for incoming migrations. +# +# Minimum must be greater than 0, however when QEMU is not running as root, +# setting the minimum to be lower than 1024 will not work. +# +# Maximum must not be greater than 65535. +# +#migration_port_min = 49152 +#migration_port_max = 49215 + + + +# Timestamp QEMU's log messages (if QEMU supports it) +# +# Defaults to 1. +# +#log_timestamp = 0 + + +# Location of master nvram file +# +# This configuration option is obsolete. Libvirt will follow the +# QEMU firmware metadata specification to automatically locate +# firmware images. See docs/interop/firmware.json in the QEMU +# source tree. These metadata files are distributed alongside any +# firmware images intended for use with QEMU. +# +# NOTE: if ANY firmware metadata files are detected, this setting +# will be COMPLETELY IGNORED. +# +# ------------------------------------------ +# +# When a domain is configured to use UEFI instead of standard +# BIOS it may use a separate storage for UEFI variables. If +# that's the case libvirt creates the variable store per domain +# using this master file as image. Each UEFI firmware can, +# however, have different variables store. Therefore the nvram is +# a list of strings when a single item is in form of: +# ${PATH_TO_UEFI_FW}:${PATH_TO_UEFI_VARS}. +# Later, when libvirt creates per domain variable store, this list is +# searched for the master image. The UEFI firmware can be called +# differently for different guest architectures. For instance, it's OVMF +# for x86_64 and i686, but it's AAVMF for aarch64. The libvirt default +# follows this scheme. +#nvram = [ +# "/usr/share/OVMF/OVMF_CODE.fd:/usr/share/OVMF/OVMF_VARS.fd", +# "/usr/share/OVMF/OVMF_CODE.secboot.fd:/usr/share/OVMF/OVMF_VARS.fd", +# "/usr/share/AAVMF/AAVMF_CODE.fd:/usr/share/AAVMF/AAVMF_VARS.fd", +# "/usr/share/AAVMF/AAVMF32_CODE.fd:/usr/share/AAVMF/AAVMF32_VARS.fd" +#] + +# The backend to use for handling stdout/stderr output from +# QEMU processes. +# +# 'file': QEMU writes directly to a plain file. This is the +# historical default, but allows QEMU to inflict a +# denial of service attack on the host by exhausting +# filesystem space +# +# 'logd': QEMU writes to a pipe provided by virtlogd daemon. +# This is the current default, providing protection +# against denial of service by performing log file +# rollover when a size limit is hit. +# +#stdio_handler = "logd" + +# QEMU gluster libgfapi log level, debug levels are 0-9, with 9 being the +# most verbose, and 0 representing no debugging output. +# +# The current logging levels defined in the gluster GFAPI are: +# +# 0 - None +# 1 - Emergency +# 2 - Alert +# 3 - Critical +# 4 - Error +# 5 - Warning +# 6 - Notice +# 7 - Info +# 8 - Debug +# 9 - Trace +# +# Defaults to 4 +# +#gluster_debug_level = 9 + +# virtiofsd debug +# +# Whether to enable the debugging output of the virtiofsd daemon. +# Possible values are 0 or 1. Disabled by default. +# +#virtiofsd_debug = 1 + +# To enhance security, QEMU driver is capable of creating private namespaces +# for each domain started. Well, so far only "mount" namespace is supported. If +# enabled it means qemu process is unable to see all the devices on the system, +# only those configured for the domain in question. Libvirt then manages +# devices entries throughout the domain lifetime. This namespace is turned on +# by default. +#namespaces = [ "mount" ] + +# This directory is used for memoryBacking source if configured as file. +# NOTE: big files will be stored here +#memory_backing_dir = "/var/lib/libvirt/qemu/ram" + +# Path to the SCSI persistent reservations helper. This helper is +# used whenever <reservations/> are enabled for SCSI LUN devices. +#pr_helper = "/usr/bin/qemu-pr-helper" + +# Path to the SLIRP networking helper. +#slirp_helper = "/usr/bin/slirp-helper" + +# Path to the dbus-daemon +#dbus_daemon = "/usr/bin/dbus-daemon" + +# User for the swtpm TPM Emulator +# +# Default is 'tss'; this is the same user that tcsd (TrouSerS) installs +# and uses; alternative is 'root' +# +#swtpm_user = "tss" +#swtpm_group = "tss" + +# For debugging and testing purposes it's sometimes useful to be able to disable +# libvirt behaviour based on the capabilities of the qemu process. This option +# allows to do so. DO _NOT_ use in production and beaware that the behaviour +# may change across versions. +# +#capability_filters = [ "capname" ] + +# 'deprecation_behavior' setting controls how the qemu process behaves towards +# deprecated commands and arguments used by libvirt. +# +# This setting is meant for developers and CI efforts to make it obvious when +# libvirt relies on fields which are deprecated so that it can be fixes as soon +# as possible. +# +# Possible options are: +# "none" - (default) qemu is supposed to accept and output deprecated fields +# and commands +# "omit" - qemu is instructed to omit deprecated fields on output, behaviour +# towards fields and commands from qemu is not changed +# "reject" - qemu is instructed to report an error if a deprecated command or +# field is used by libvirtd +# "crash" - qemu crashes when an deprecated command or field is used by libvirtd +# +# For both "reject" and "crash" qemu is instructed to omit any deprecated fields +# on output. +# +# The "reject" option is less harsh towards the VMs but some code paths ignore +# errors reported by qemu and thus it may not be obvious that a deprecated +# command/field was used, thus it's suggested to use the "crash" option instead. +# +# In cases when qemu doesn't support configuring the behaviour this setting is +# silently ignored to allow testing older qemu versions without having to +# reconfigure libvirtd. +# +# DO NOT use in production. +# +#deprecation_behavior = "none" + +# If this is set then QEMU and its threads will run in a separate scheduling +# group meaning no other process will share Hyper Threads of a single core with +# QEMU. Each QEMU has its own group. +# +# Possible options are: +# "none" - (default) neither QEMU or any of its helper processes are placed +# into separate scheduling group +# "vcpus" - only QEMU vCPU threads are placed into a separate scheduling group, +# emulator threads and helper processes remain outside of the group +# "emulator" - only QEMU and its threads (emulator + vCPUs) are placed into +# separate scheduling group, helper processes remain outside of +# the group +# "full" - both QEMU and its helper processes are placed into separate +# scheduling group +#sched_core = "none" |